Solutions Search - µModule Solutions

LTM4647 Typical 6V to 15V Input 1.0V at 30A Output Design

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

 

LTM4647 Typical 4.7V to 5.5V Input 1.2V at 30A Output Design

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

 

LTM4647 6V to 15V Input, 1.0V Output at 60A

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

 

LTM4647 6V to 15V Input, 1.0V and 1.2V Output with Tracking

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

 

LTM4647 3-Phase 1V at 90A Design with Extra 1 Phase 30A Redundancy

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

 

LTM4647 4-Phase 6-15Vin, 1Vout at 120A Step Down uModule Design

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

 

LTM4647 4 Phase 1V at 120A Design

Nov 17th 2016
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

 

LTM4643 4V to 20V Input, Quad 1.2V, 1.5V, 2.5V and 3.3V Output with Ratiometric Tracking

Sep 8th 2016
The LTM®4643 is a quad DC/DC step-down μModule (power module) regulator with 3A per output. Outputs can be paralleled in an array for up to 12A capability. Included in the package are the switching controllers, power FETs, inductors and support components. Operating over an input voltage range of 4V to 20V or 2.375V ...

 

LTM4643 2.375V to 5V Input, Quad 1V, 1.2V, 1.5V, 1.8V Output

Sep 8th 2016
The LTM®4643 is a quad DC/DC step-down μModule (power module) regulator with 3A per output. Outputs can be paralleled in an array for up to 12A capability. Included in the package are the switching controllers, power FETs, inductors and support components. Operating over an input voltage range of 4V to 20V or 2.375V ...

 

LTM4643 4V to 20V Input, 4-Phase, 1.2V at 12A Design with Temperature Monitoring

Sep 8th 2016
The LTM®4643 is a quad DC/DC step-down μModule (power module) regulator with 3A per output. Outputs can be paralleled in an array for up to 12A capability. Included in the package are the switching controllers, power FETs, inductors and support components. Operating over an input voltage range of 4V to 20V or 2.375V ...

 

LTM4643 12V and 5V Two Separate Input Rails, 1.2V at 6A and 3.3V at 6A Output

Sep 8th 2016
The LTM®4643 is a quad DC/DC step-down μModule (power module) regulator with 3A per output. Outputs can be paralleled in an array for up to 12A capability. Included in the package are the switching controllers, power FETs, inductors and support components. Operating over an input voltage range of 4V to 20V or 2.375V ...

 

LTM8040 Step Down 1A Drive with Single Red or White LED

Sep 2nd 2016
The LTM8040 is a fixed frequency 1A step-down DC/DC μModule (power module) regulator designed to operate as a constant current source. Internal circuitry monitors the output current to provide accurate current regulation, which is ideal for driving high current LEDs. High output current accuracy is maintained over a wide ...

 

LTM8040 Step Down 350mA Drive with Three Series Red LEDs

Sep 2nd 2016
The LTM8040 is a fixed frequency 1A step-down DC/DC μModule (power module) regulator designed to operate as a constant current source. Internal circuitry monitors the output current to provide accurate current regulation, which is ideal for driving high current LEDs. High output current accuracy is maintained over a wide ...

 

LTM8040 Step Down 1A Drive with Four Series Red LEDs

Sep 2nd 2016
The LTM8040 is a fixed frequency 1A step-down DC/DC μModule (power module) regulator designed to operate as a constant current source. Internal circuitry monitors the output current to provide accurate current regulation, which is ideal for driving high current LEDs. High output current accuracy is maintained over a wide ...

 

LTM8042 Boost Operation, Driving 6 White LEDs at 1A

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

 

LTM8042 Boost Operation, Driving 9 White LEDs at 100mA

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

 

LTM8042 Buck-Boost Mode, Driving 5 White LEDs at 500mA with PWM Dimming

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

 

LTM8042 Buck Mode, Driving 4 White LEDs at 1A

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

 

LTM8042 Boost Operation, Driving 9 Red LEDs at 350mA with Analog Dimming

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

 

LTM4631 20A, 1.2V Output Ultrathin μModule Regulator

Aug 15th 2016
The LTM4631 is a dual 10A or single 20A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductors and all supporting components. Operating from an input voltage range of 4.5V to 15V, the LTM4631 supports two outputs each with ...

 

LTM4631 Ultrathin uModule 4-Phase, 1.2V at 40A Output

Aug 15th 2016
The LTM4631 is a dual 10A or single 20A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductors and all supporting components. Operating from an input voltage range of 4.5V to 15V, the LTM4631 supports two outputs each with ...

 

Xilinx Kintex UltraScale Half-Size PCI Express Platform (HTG-K816)

Jun 13th 2016
HiTech Global's HTG-K816 is populated with Xilinx Kintex UltraScale 035, 040, or 060 FPGA. The HTG-K816 network card provides access to eight lanes of PCI Express Gen 3 ( 8 x 8Gbps), two independent banks of DDR4 (72-bit) memory components (5GB), and front panel Z-Ray interface for hosting high-speed mezzanine cards.     Rail ...

 

Xilinx Virtex UltraScale Development Platform

Jun 10th 2016
HiTech Global's  HTG-830 architecture allows easy and versatile functional expansion through two Vita 57.4 and one Vita 57.1 compliant High-Pin-Count FPGA Mezzanine Card (FMC) connectors. The FMC connectors provide access to 344 single-ended FPGA I/Os (172 LVDS) and up to 32 GTH, and 20 GTY serial transceivers. ...

 

LTM8053 2.5VOUT from 4VIN to 15VIN Step-Down Converter

Jun 9th 2016
The LTM®8053 is a 40VIN, 3.5A (continuous) step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053 supports an output voltage range of 0.97V to 15V and ...

 

LTM8053 15VOUT from 19.5VIN to 40VIN Step-Down Converter

Jun 9th 2016
The LTM®8053 is a 40VIN, 3.5A (continuous) step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053 supports an output voltage range of 0.97V to 15V and ...

 

LTM8053 1.2VOUT from 3.4VIN to 40VIN Step-Down Converter

Jun 9th 2016
The LTM®8053 is a 40VIN, 3.5A (continuous) step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053 supports an output voltage range of 0.97V to 15V and ...

 

LTM8053 7-40Vin, 5Vout@7A with Two Parallel Modules

Jun 9th 2016
The LTM®8053 is a 40VIN, 3.5A (continuous) step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053 supports an output voltage range of 0.97V to 15V and ...

 

LTM8053 –5VOUT from 5VIN to 35VIN Positive to Negative Converter

Jun 9th 2016
The LTM®8053 is a 40VIN, 3.5A (continuous) step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053 supports an output voltage range of 0.97V to 15V and ...

 

LTM8053 0.97VOUT from 3.4VIN to 40VIN Step-Down Converter with Spread Spectrum

Jun 9th 2016
The LTM®8053 is a 40VIN, 3.5A (continuous) step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor, and all support components. Operating over an input voltage range of 3.4V to 40V, the LTM8053 supports an output voltage range of 0.97V to 15V and ...

 

NXP (Freescale) QorIQ LS1088A-RDB

Apr 25th 2016
The QorIQ LS1088A reference design board (LS1088A-RDB) is designed to exercise most capabilities of the LS1088A device; with up to eight ARM® Cortex®-A53 cores with the advanced, high-performance data-path and network peripheral interfaces required for wireless access points, networking infrastructure, ...

 

LTM4632 4V to 15V Input, Two Phase Single Output ±6A VTT Termination Design with LTM4630 36A VDDQ Supply

Mar 16th 2016
The LTM®4632 is an ultrathin triple output step-down μModule® (power module) regulator to provide complete power solution for DDR-QDR4 SRAM. Operating from a 3.6V to 15V input voltage, the LTM4632 supports two ±3A output rails, both sink and source capable, for VDDQ and VTT, plus a 10mA low noise reference ...

 

Two LTM8064s Operating in Parallel to Produce 12VOUT at 12A

Mar 1st 2016
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor and support components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range ...

 

LTM8064 58VIN, LTM8064 Charges Two 2.5V Series Supercapacitors at 7A

Mar 1st 2016
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor and support components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range ...

 

LTM8064 46VIN, –12VOUT Negative Converter

Mar 1st 2016
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor and support components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range ...

 

Stack Two LTM8064s to Charge and Actively Balance Supercapacitors (or Batteries)

Mar 1st 2016
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor and support components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range ...

 

LTM8064 58VIN, 24VOUT Step-Down Converter with 4A Accurate Current Limit

Mar 1st 2016
The LTM®8064 is a 58VIN, 6A, constant-voltage, constantcurrent (CVCC), step-down μModule® (power module) regulator. Included in the package are the switching controller, power switches, inductor and support components. Operating over an input voltage range of 6V to 58V, the LTM8064 supports an output voltage range ...

 

Xilinx Tested Power Solution for the Virtex UltraScale MGTs (Multi-Gigabit Transceivers)

Feb 10th 2016
The VCU1287 Characterization Board MGTs can be powered using the Linear Technology DC2352A Plug-in-Board. The LTM4630-1s & LTM4624 μModules from Linear Technology are used on the DC2352A to meet the stringent power and low noise requirements for the GTH (16Gbps) & GTY (30Gbps) transceivers. The LTC2974, 4-Channel ...

 

Xilinx Kintex UltraScale PCI Express Platform

Feb 9th 2016
HiTech Global's HTG-K800 board is populated by the Xilinx Kintex UltraScale XCKU-60, 085, or 115 FPGA and supports a wide variety of expansion modules.           Rail / Function  Part Number General Description of Part 0.95V: VCCINT (FPGA Core) LTM4620 Dual 13A ...

 

LTM4650 Step Down uModule 2-Phase, 1V at 50A Design

Feb 4th 2016
The LTM®4650 is a dual 25A or single 50A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controllers, power FETs, inductors, and all supporting components. Operating from an input voltage range of 4.5V to 15V, the LTM4650 supports two outputs each ...

 

LTM4650 Step Down uModule 4.5-15Vin, 1.2V and 1V at 25A Output Tracking

Feb 4th 2016
The LTM®4650 is a dual 25A or single 50A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controllers, power FETs, inductors, and all supporting components. Operating from an input voltage range of 4.5V to 15V, the LTM4650 supports two outputs each ...

 

LTM4650 Step Down uModule 4-Phase, 4.5V to 15Vin, 1.2Vout at 100A

Feb 4th 2016
The LTM®4650 is a dual 25A or single 50A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controllers, power FETs, inductors, and all supporting components. Operating from an input voltage range of 4.5V to 15V, the LTM4650 supports two outputs each ...

 

LTM8067 2kVAC Isolated μModule Regulator

Feb 1st 2016
The LTM®8067 is a 2kVAC isolated flyback μModule® (power module) DC/DC converter. Included in the package are the switching controller, power switches, transformer, and all support components. Operating over an input voltage range of 2.8V to 40V, the LTM8067 supports an output voltage range of 2.5V to 24V, set by ...

 

LTM4648 3.3V to 5V VIN, 2.5VOUT at 8A Design with Increased 650kHz Frequency

Dec 14th 2015
The LTM®4648 is a 10A low VIN step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 2.375V to 5.5V, the LTM4648 supports an output voltage range of 0.6V to 5V, set by a single ...

 

LTM4648 2.375V to 5.5VIN, 1.2V at 10A Design

Dec 14th 2015
The LTM®4648 is a 10A low VIN step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 2.375V to 5.5V, the LTM4648 supports an output voltage range of 0.6V to 5V, set by a single ...

 

Three LTM4648 in Parallel, 1.5V at 30A Design

Dec 14th 2015
The LTM®4648 is a 10A low VIN step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 2.375V to 5.5V, the LTM4648 supports an output voltage range of 0.6V to 5V, set by a single ...

 

LTM4648 10A Design with Temperature Monitoring

Dec 14th 2015
The LTM®4648 is a 10A low VIN step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 2.375V to 5.5V, the LTM4648 supports an output voltage range of 0.6V to 5V, set by a single ...

 

Xilinx Virtex UltraScale Multi 100 Gig Optical Networking Platform

Nov 17th 2015
HiTech Global’s HTG-9100 board is populated by the Xilinx Virtex UltraScale 095, 125, 160, or 190 FPGA. It is an ideal platform for high-end networking applications requiring multiple100GIG ports through CFP4 and QSFP28 connectors and large DDR4 memory resources.       Rail / Function  Part ...

 

LTC3643 12V Backup System for Automotive Applications

Nov 4th 2015
The LTC®3643 is a bidirectional synchronous step-up charger and step-down converter which efficiently charges a capacitor array up to 40V from an input supply between 3V to 17V. When the input supply falls below the programmable power-fail threshold, the step-up charger operates in reverse as a synchronous step-down regulator ...

 

Stratix V Advanced System Development Board

Oct 22nd 2015
The Stratix® V Advanced Systems Development Kit is a complete systems design environment that includes both the hardware and software needed to begin architecture development and system design using Stratix V FPGAs. The PCI Express® (PCIe®)-based form-factor board combined with a one-year license for the ...

 

Altera Arria 10 SoC Development Kit

Oct 5th 2015
The Altera® Arria® 10 SoC Development Kit offers a quick and simple approach for developing custom ARM® processor-based SoC designs. Design productivity is one of the driving philosophies of the Arria 10 SoC architecture. The Arria 10 SoCs offers full software compatibility with previous generation ...

 

NXP (Freescale) QorIQ LS1043A-RDB

Sep 28th 2015
The QorIQ LS1043A reference design board (LS1043A-RDB) is designed to exercise most capabilities of the LS1043A device; NXP’s first quad-core, 64-bit ARM®-based processor for embedded networking and industrial infrastructure.     Rail / Function  Part Number General ...

 

NXP / Freescale Processor Solutions

Sep 22nd 2015
Linear Technology has worked closely with NXP (Freescale) and Strategic NXP (Freescale) Partners to provide you with approved and tested solutions for your processor based systems. Below you will find a host of useful tools that will allow you to select approved solutions for NXP. Linear Technology highly recommends ...

 

LTM8054 24VOUT from 7.5VIN to 36VIN with 1.2A Accurate Current Limit

Aug 31st 2015
The LTM®8054 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM8054 3.3VOUT from 6VIN to 36VIN with 2.6A Accurate Current Limit and Output Current Monitor

Aug 31st 2015
The LTM®8054 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

Two LTM8054s Paralleled to Get More Output Current - 12Vout @ 5A From 7V-36Vin

Aug 31st 2015
The LTM®8054 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM8054 14.4V, 3A Lead-Acid Battery Charger Input Current Limited to 2A

Aug 31st 2015
The LTM®8054 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM4622 1.5V and 1V Dual Output DC/DC Step-Down Ultrathin uModule Regulator

Jul 17th 2015
The LTM4622 is a complete dual 2.5A step-down switching mode µModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA package. Includedinthepackage are the switchingcontroller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the ...

 

Altera Arria 10 FPGA Development Kit

Jul 17th 2015
The LTC3877 + LTC3874 are used to provide power for the Core Rail by taking advantage of the 6-bit parallel VID that interfaces with the 20-nm Arria 10’s SmartVID to reduce the FPGA’s static and dynamic power consumption, and Ultralow value and temperature compensated DCR load current sensing which maximizes ...

 

LTM4622 Ultrathin uModule 4Vin to 20Vin, 1.2V Two Phase in Parallel 5A Design

Jul 17th 2015
The LTM4622 is a complete dual 2.5A step-down switching mode µModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA package. Includedinthepackage are the switchingcontroller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the ...

 

LTM4622 Ultrathin uModule 4Vin to 20Vin, 1V and 1.8V Output at 2.5A Design

Jul 17th 2015
The LTM4622 is a complete dual 2.5A step-down switching mode µModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA package. Includedinthepackage are the switchingcontroller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the ...

 

LTM4622 Ultrathin uModule 3.3Vin, 1.5V and 1.2V Output at 2.5A Design with Output Coincident Tracking

Jul 17th 2015
The LTM4622 is a complete dual 2.5A step-down switching mode µModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA package. Includedinthepackage are the switchingcontroller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the ...

 

LTM4622 Ultrathin uModule 8Vin to 20Vin, 3.3V and 5V Output at 2.5A with 2MHz Switching Frequency

Jul 17th 2015
The LTM4622 is a complete dual 2.5A step-down switching mode µModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA package. Includedinthepackage are the switchingcontroller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the ...

 

LTM4622 4 Phase, 1V Output at 10A Ultrathin uModule Solution

Jul 17th 2015
The LTM4622 is a complete dual 2.5A step-down switching mode µModule® (micromodule) regulator in a tiny ultrathin 6.25mm × 6.25mm × 1.82mm LGA package. Includedinthepackage are the switchingcontroller, power FETs, inductor and support components. Operating over an input voltage range of 3.6V to 20V, the ...

 

LTM4675 18A, 1.5V Output DC/DC μModule Regulator with I2C/SMBus/PMBus Serial Interface

Jul 15th 2015
The LTM®4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 70ms turn-on time. It features remote configurability and telemetry-monitoring of power management parameters over PMBus— an open standard I2C-based digital interface protocol . The LTM4675 is comprised of fast analog ...

 

Four Paralleled LTM4675 Producing 1Vout at Up to 70A with PMBus

Jul 15th 2015
The LTM®4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 70ms turn-on time. It features remote configurability and telemetry-monitoring of power management parameters over PMBus— an open standard I2C-based digital interface protocol . The LTM4675 is comprised of fast analog ...

 

LTM4675 uModule 12Vin, 1Vout at up 122A with PMBus

Jul 15th 2015
The LTM®4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 70ms turn-on time. It features remote configurability and telemetry-monitoring of power management parameters over PMBus— an open standard I2C-based digital interface protocol . The LTM4675 is comprised of fast analog ...

 

LTM4675 18A, 5V Output DC/DC μModule Regulator with Serial Interface/PMBus

Jul 15th 2015
The LTM®4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 70ms turn-on time. It features remote configurability and telemetry-monitoring of power management parameters over PMBus— an open standard I2C-based digital interface protocol . The LTM4675 is comprised of fast analog ...

 

LTM4675 9A, 1V and 9A, 1.8V Output DC/DC μModule Regulator with Serial Interface/PMBus

Jul 15th 2015
The LTM®4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 70ms turn-on time. It features remote configurability and telemetry-monitoring of power management parameters over PMBus— an open standard I2C-based digital interface protocol . The LTM4675 is comprised of fast analog ...

 

LTM8056 24Vout from 7Vin to 58Vin Buck-Boost Regulator

Mar 19th 2015
The LTM®8056 is a 58VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

Two LTM8056s Paralleled and Synchronized, Vin 7V -58V, Vout 18V @ 8A

Mar 19th 2015
The LTM®8056 is a 58VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM8056 14.4V, 3A Lead-Acid Battery Charger Input Current Limited to 2A

Mar 19th 2015
The LTM®8056 is a 58VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM8055 12Vout from 5Vin to 36Vin Buck-Boost Regulator

Mar 19th 2015
The LTM®8055 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM8055 uModule Regulators Paralleled and Synchronized - Vin 7V to 36V, Vout 12V @ 12A

Mar 19th 2015
The LTM®8055 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM8055 14.4V, 3A Lead-Acid Battery Charger Input Current Limited to 2.1A

Mar 19th 2015
The LTM®8055 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

 

LTM8062 Basic 2A, 2-Cell LiFePO4 Battery Charger with C/10 Termination

Jan 15th 2015
The LTM®8062/LTM8062A are complete 32VIN, 2A μModule® power tracking battery chargers. The LTM8062/ LTM8062A provide a constant-current/constant-voltage charge characteristic, a 2A maximum charge current, and employ a 3.3V float voltage feedback reference, so any desired battery float voltage up to 14.4V for the ...

 

LTM8062 2A Solar Panel Power Manager with 8.4V Lithium Ion Battery Pack and 16V Peak Power Tracking

Jan 15th 2015
The LTM®8062/LTM8062A are complete 32VIN, 2A μModule® power tracking battery chargers. The LTM8062/ LTM8062A provide a constant-current/constant-voltage charge characteristic, a 2A maximum charge current, and employ a 3.3V float voltage feedback reference, so any desired battery float voltage up to 14.4V for the ...

 

LTM8061 Standalone Single Cell 2A Li-Ion Battery Charger with C/10 Termination from 6V to 32V Input

Jan 15th 2015
The LTM®8061 is a high efficiency 32V, 2A μModule® standalone Li-Ion battery charger. It is optimized for one and two-cell packs, with fixed float voltage options: 4.1V, 4.2V, 8.2V and 8.4V. The LTM8061 provides a constant-current/constant-voltage charge characteristic, with maximum charge current up to 2A. A precondition ...

 

LTM8061 Two Cell 1A Li-Ion Battery Charger with C/10 Termination and Reverse Input Protection

Jan 15th 2015
The LTM®8061 is a high efficiency 32V, 2A μModule® standalone Li-Ion battery charger. It is optimized for one and two-cell packs, with fixed float voltage options: 4.1V, 4.2V, 8.2V and 8.4V. The LTM8061 provides a constant-current/constant-voltage charge characteristic, with maximum charge current up to 2A. A precondition ...

 

LTM8061 Single Cell 2A Li-Ion Battery Charger with 3 Hour Timer Termination and Reverse Input Protection

Jan 15th 2015
The LTM®8061 is a high efficiency 32V, 2A μModule® standalone Li-Ion battery charger. It is optimized for one and two-cell packs, with fixed float voltage options: 4.1V, 4.2V, 8.2V and 8.4V. The LTM8061 provides a constant-current/constant-voltage charge characteristic, with maximum charge current up to 2A. A precondition ...

 

LTM8061 Two Cell 2A Li-Ion Battery Charger with Thermistor, C/10 Termination and Reverse Input Protection

Jan 15th 2015
The LTM®8061 is a high efficiency 32V, 2A μModule® standalone Li-Ion battery charger. It is optimized for one and two-cell packs, with fixed float voltage options: 4.1V, 4.2V, 8.2V and 8.4V. The LTM8061 provides a constant-current/constant-voltage charge characteristic, with maximum charge current up to 2A. A precondition ...