Solutions Search - Voltage To Frequency Conversion
Low Phase Noise Frequency Synthesizers for RF Applications
Sep 19th 2011
In modern RF communication systems, signal integrity is of prime importance. To meet the system requirements, amplifiers, mixers and modulators must have a low noise figure and low distortion products. Additionally, as system designers work to squeeze increasingly more data into the available bandwidth, low phase noise signal ...
LTC6990 Full Range VCO with Any NDIV Setting (Positive Frequency Control, fMIN to fMAX for VIN = 0V to VSET
May 12th 2010
The LTC®6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled oscillator (VCO). The LTC6990 is part of the TimerBlox® family of versatile silicon timing devices.
A single resistor, RSET, programs the LTC6990’s internal ...
Temperature to Frequency Converter
May 12th 2010
3% Linearity from –20°C (Fout = 20kHz) to 75°C (Fout = 25kHz)
The LTC6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled oscillator (VCO). The LTC6990 is part of the TimerBlox family of versatile silicon timing devices. ...
Voltage Controlled Oscillator with 16:1 Frequency Range
May 12th 2010
The LTC6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be
used as a fixed-frequency or voltage-controlled oscillator (VCO). The LTC6990 is part of the TimerBlox family of versatile silicon timing devices. A single resistor, RSET, programs the LTC6990’s internal master oscillator ...
LTC6990 Isolated Voltage to Frequency Converter. VIN Provided by Isolated Measurement Circuit. 5μs Rise/Fall Time of Isolator Limits fMAX to 60kHz
May 12th 2010
The LTC®6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled oscillator (VCO). The LTC6990 is part of the TimerBlox® family of versatile silicon timing devices.
A single resistor, RSET, programs the LTC6990’s internal ...
Light to Frequency Converter
May 12th 2010
Fout = –1.4kHz per microampere of photo diode current, IPD.
The LTC6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled oscillator (VCO). The LTC6990 is part of the TimerBlox family of versatile silicon timing devices. A single ...
LT2940 28V Power to Frequency Converter
Nov 30th 2009
In some environments isolation is necessary for safety or noise reasons. The circuit above shows a power-to-frequency converter using the LT2940. The PMON output alternately charges and discharges a film capacitor, C5. When the voltage on C5 charges to the upper threshold on hysteretic comparator LTC1440, its output flips ...
0.01% Voltage To Frequency Converter
Sep 3rd 2004
The LTC6943 is a monolithic, charge-balanced, dual switched capacitor instrumentation building block. A pair of switches alternately connects an external capacitor to an input voltage and then connects the charged capacitor across an output port. The internal switches have a break-before-make action. An internal clock is provided ...
Micropower 1MHz V/F Converter
Jan 1st 1998
A 0V to 5V input produces a 0MHz to 1MHz output frequency. ...
13uA, 0kHz to 10kHz Voltage to Frequency Converter
Jan 22nd 1997
This circuit converts a 0V to 2.5V input signal to a 0kHz to 10kHz output frequency. The supply current of the circuit is only 6.2uA quiescent and 13.3uA at f=10kHz. The linearity of the circuit is +/-0.03%. PSRR is 10ppm/V and temperature drift is 250ppm/C. ...
5V Powered, Quartz-Stabilized 10kHz Voltage to Frequency Converter has 0.0015% Linearity and 8ppm/°C Temperature Coefficient
Nov 16th 1992
Almost all precision voltage-to-frequency converters utilize charge pump based feedback for stability. These schemes rely on a capacitor for stability. A great deal of effort towards this approach has resulted in high performance V to F converters. Obtaining temperature coefficients below 100ppm/°C requires careful attention ...
1Hz to 100MHz Voltage to Frequency Converter Has 160dB Dynamic Range, Runs From 5V Supply
Jan 1st 1990
This circuit achieves a wider dynamic range and higher output frequency than any commercially available voltage to frequency (V→F) converter. Its 100MHz full scale output (10% over range to 110MHz is provided) is at least ten times faster than available units. The circuit’s 160dB dynamic range (8 decades) allows continuous ...
1Hz to 10kHz Voltage to Frequency Converter
Jan 1st 1987
JFET inputs with anti phase-reversal circuitry allow the LTC1055/56 to be used as a precision, ultra-high impedance comparator. The precision provides for very high linearity of the V/F generation while the high speed allows a large frequency range of operation. ...
Temperature-to-Frequency Converter
Jan 1st 1987
Precision oscillator structure uses SCR effect to discharge integration capacitor. A temperature dependent device (LM134) effects the integrator trip point to form a variable interval. An output transistor detects the reset action and forms a logic pulse. ...
Exponential Voltage-to-Frequency Converter for Music Synthesizers
Jan 1st 1987
Logarithmic characteristic of BJT is used to provide an exponential control effect on V/F function. By using a multiple transistor array, a thermal stabilization circuit assures a constant operating point for the log function. ...
Bipolar Input (AC) V/F Converter
Jan 1st 1987
Input integrator uses precision full-wave rectifier for an absolute-value integration charge. Since not ground referenced, the integration ramp is sensed by a diff amp structure that drives the V/F output comparator. A simple comparison forms a sign bit. ...
LTC6990/LTC1440/LTC1059 Quadrature Sine Wave Oscillator
Jan 1st 1987
This circuit provides a voltage controlled frequency range from 2Hz to 18kHz with 1Vp-p constant putput amplitude. The LTC6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled oscillator (VCO). The LTC6990 is part of the TimerBlox ...
Loading