1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - Step Up-Step Down DC-DC Solutions (Vout > and < Vin)

DC1341B - LT3757EDD SEPIC Demo Board | 4.5V ≤ Vin ≤ 36V; Vout = 5V @ 3A

Nov 3rd 2017
Demonstration circuit 1341B features LT®3757A in a 300kHz SEPIC converter circuit, designed for a 5V at 3A output from a 4.5V to 36V input voltage range.   ...

Demo Board 

 

DC2234A - LT8711 Micropower Synchronous Sepic Converter

Oct 2nd 2017
Demonstration circuit 2234A is a synchronous sepic converter featuring the LT®8711 multitopology switching controller. The LT8711 is a current mode PWM DC/DC controller with a dual input LDO to optimize gate driver efficiency. Ultralow 15μA quiescent current in low noise Burst Mode® operation achieves high efficiency ...

Demo Board 

 

DC2285A - LT8705AEUHF Demo Board | VIN = 36V to 75V, VOUT = 48V @18A

Aug 4th 2017
Demonstration circuit 2285A features two high power high performance buck-boost LT®8705A converters operating in master-slave configuration. The circuit can operate with input voltages above, below or equal to the output voltage. The demo board input range is 36V to 75V. The output is optimized for 48V at 18A, with the output ...

Demo Board 

 

DC2466A - LTC3246 Demo Board | Wide VIN Range Buck-Boost Charge Pump with Watchdog Timer

Aug 4th 2017
Demonstration circuit 2466A is a buck-boost 500mA charge pump with pin selectable output voltages and includes a watchdog timer featuring the LTC®3246EMSE. The LTC3246 operates with a wide input voltage range from 2.7V to 38V and is engineered for diagnostic coverage for ISO 262262 compliant systems. The wide VIN operating ...

Demo Board 

 

DC2598A - LT8390A Demo Board | VIN = 4V to 24V, (60V transient) with VOUT = 12V at 4A @ 2MHz

Jul 20th 2017
Demonstration circuit 2598A is a 60V 2MHz synchronous buck-boost controller featuring the LT®8390A. It accepts an input voltage from 4V to 24V (with transient to 60V) and regulates 12V output at up to 4A. DC2598A features high efficiency and 2MHz switching frequency, a high speed for a 4-switch buck-boost controller. It ...

Demo Board 

 

DC2129A - LTC3119 Demo Board | Sync Buck-Boost, 2.5V ≤ VIN ≤ 18V, VOUT = 5V @ Up to 5A

Feb 24th 2017
Demonstration circuit 2129A features the LTC®3119, an 18V, 5A synchronous buck/boost DC/DC converter. The DC2129A has been designed for an input voltage range of 2.5V to 18V with an output voltage (VOUT) set to 5V. For VIN > 5V the output current can be as high as 5A. The unique 4-switch, single inductor architecture ...

Demo Board 

 

DC2457A - LT8390 Demo Board | Sync Buck-Boost Controller, 4V ≤ VIN ≤ 60V, VOUT = 12V @ 4A (Fsw=400kHz)

Jan 20th 2017
Demonstration circuit DC2457A is a 12V, 4A, 4-switch synchronous buck-boost regulator featuring low EMI noise and small footprint. It runs at 400kHz switching frequency. Spread spectrum frequency modulation (SSFM) can be turned on with a simple jumper, reducing EMI. DC2457A also comes with other low EMI features including optimized ...

Demo Board 

 

DC2123B - LT3790 Demo Board | Sync Buck-Boost, 8V ≤ VIN ≤ 56V, Vout = 24V at up to 5A

Jan 18th 2017
The DC2123B is a 60V four-switch synchronous buck-boost controller that demonstrates the high power capability of the LT®3790. The output is 24V and the maximum output current is 5A. The switching frequency is 200kHz and efficiency is as high as 98% for a 24V input. The LT3790 is capable of high power operation. DC2123B ...

Demo Board 

 

LTC3119 3.3V,1.5MHz Wide Input Regulator

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LTC3119 5V, 2MHz Wide Input Regulator

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LTC3119 12V, 2MHz Wide Input Regulator

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LTC3119 12V, 750kHz Regulator with Input Supply Rundown

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LTC3897 High Efficiency 2-Phase 24V Boost Converter with In-Rush Current Control, Overcurrent Protection, Input Voltage Surge Protection and Reverse Input Protection

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

DC2199B-C - LTC3765EMSE/LTC3766EGN Isolated Demo Board | Forward Converter with Sync Rectification, 36V ≤ VIN ≤ 60V; VOUT = 56V @ 5.4A

Nov 29th 2016
Demonstration circuit 2199B-C is a 300W isolated forward converter with synchronous rectification featuring the LTC3765/LTC3766 chip-set. It produces a regulated 56V, 5.4A output from an input voltage range of 36V to 60V. ...

Demo Board 

 

DC2138B - LT8301ES5 Isolated Demo Board | No-Opto Flyback, 10V ≤ VIN ≤ 32V, VOUT = 5V @ 0.7A to 1A

Oct 19th 2016
Demonstration circuit 2138B is an isolated flyback converter featuring the LT®8301. This demo circuit outputs 5V from a 10V to 32V input, with a nominal of 24V. The output current capability increases with the input voltage. The standby input current of the demo circuit is less than 950μA (typical) at VIN = 24V. ...

Demo Board 

 

DC2431A - LT8390EFE Demo Board | Sync Buck-Boost, 9V ≤ VIN ≤ 36V, VOUT = 12V @ 25A

Oct 13th 2016
Demonstration circuit 2431A is a 4-switch synchronous buck-boost regulator that demonstrates the high power capability of the LT®8390. The output is 12V and the maximum output current is 25A for up to 300W power delivery. The switching frequency is 150kHz and efficiency can go higher than 98%. ...

Demo Board LTspice 

 

DC2244A - LTM8049 Demo Board | Dual SEPIC/Inverting μModule, 2.8V ≤ VIN ≤ 18V, Vout1/2 = ±12V@1A

Sep 27th 2016
Demonstration circuit 2244A features the LTM®8049, a dual SEPIC or inverting μModule® regulator. The demo circuit is configured as two stand-alone SEPIC and Inverting DC/DC converters with +12V and –12V output voltages from an input voltage up to 20V. The switching frequencies of both channels are set at 1MHz ...

Demo Board LTspice 

 

DC2397A - LTC3130EUD-1 Demo Board | Sync Buck-Boost, 2.4V ≤ VIN ≤ 25V, Vout = 1.8V/3.3V/5V/12V @ 600mA

Sep 20th 2016
Demonstration circuit 2397A features the LTC®3130-1, a wide input voltage, wide output voltage operating range, high efficiency, low noise monolithic DC/DC buck-boost converter that provides 600mA of output current when in buck mode. The LTC3130-1 has 4-pin selectable output voltages (1.8V, 3.3V, 5V and 12V) and operates ...

Demo Board 

 

DC2355A - LTC3130EUD Demo Board | Sync Buck-Boost, 2.4V ≤ VIN ≤ 25V, Vout = 5V @ 600mA

Sep 20th 2016
Demonstration Circuit 2355A features the LTC®3130, a wide input voltage, wide output voltage operating range, high efficiency, low noise monolithic DC/DC buck-boost converter that can provide up to 600mA output current in buck mode. The LTC3130 operates from input voltages of 2.4V to 25V. The demo board has been designed ...

Demo Board 

 

LT3517 5.5V SEPIC Convener with Short-Circuit Protection

Sep 13th 2016
The LT3517 is a current mode DC/DC converter with an internal 1.5A, 45V switch specifically designed to drive LEDs. The LT3517 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LTC3221 Micropower, Regulated 5V or 3.3V Charge Pump in 2 x 2 DFN

Sep 12th 2016
The LTC3221 family are micropower charge pump DC/DC converters that produce a regulated output at up to 60mA. The input voltage range is 1.8V to 5.5V. Extremely low operating current (8μA typical at no load) and low external parts count (one flying capacitor and two small bypass capacitors at VIN and VOUT) make them ideally ...

Circuit 

 

LTC3112 Regulated 12V Output from Wide Input Supply Range

Sep 9th 2016
The LTC®3112 is a fixed frequency synchronous buck-boost DC/DC converter with an extended input and output range. The unique 4-switch, single inductor architecture provides low noise and seamless operation from input voltages above, below or equal to the output voltage. ...

Circuit 

 

LTC3245 High Efficiency 3.3V Microcontroller Supply from 9V Alkaline (with Power-On Reset Delay)

Sep 2nd 2016
The LTC3245 is a switched capacitor buck-boost DC/DC converter that produces a regulated output (3.3V, 5V or adjustable) from a 2.7V to 38V input. The device uses switched capacitor fractional conversion to maintain regulation over a wide range of input voltage. Internal circuitry automatically selects the conversion ratio to ...

Circuit 

 

LTC3245 Wide Input Range Low Noise 3.6V Supply

Sep 2nd 2016
The LTC3245 is a switched capacitor buck-boost DC/DC converter that produces a regulated output (3.3V, 5V or adjustable) from a 2.7V to 38V input. The device uses switched capacitor fractional conversion to maintain regulation over a wide range of input voltage. Internal circuitry automatically selects the conversion ratio to ...

Circuit 

 

LT8303 30V to 80Vin, 48Vout Isolated Flyback Converter

Aug 31st 2016
The LT8303 is a micropower high voltage isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with a single external resistor. Internal compensation and soft-start ...

Circuit 

 

LTC3130 Battery-Powered 24V Converter with 200mA ILIM to Limit Battery Droop

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 Wide VIN Range 15V Converter with Burst Mode Operation

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 Low Noise, Wide Vin Range 5V Converter

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 Multiple VIN 5V Out Application, Using the LTC4412 PowerPath Controller

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 12V Converter Uses MPPC Function to Maintain a Minimum VIN from a Current Limited Source

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 12V Converter with Burst Mode Operation and VIN UVLO

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 Single-Cell 1.2V, 200mA Buck-Boost Converter

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 Wide Vin Range, Low Noise 1.8V Converter Uses Charge Pump to Generate EXTVcc

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LTC3130 Wide Vin Range 5V Converter Uses Small Primary Battery to Guarantee Start-Up at Vin Less Than 1V with Near Zero Steady-State Battery current for Up to 10 Year Battery Life

Aug 15th 2016
LTC3130 Wide Vin Range 5V Converter Uses Small Primary Battery to Guarantee Start-Up at Vin Less Than 1V with Near Zero Steady-State Battery current for Up to 10 Year Battery Life The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at ...

Circuit 

 

DC1821B - LTC3114EDHC-1 Demo Board | Sync Buck-Boost, VIN=2.7V to 40V, VOUT = 5V @ Up to 1A

Jul 20th 2016
Demonstration circuit 1821B features the LTC3114-1, a wide operating range synchronous monolithic buck-boost converter with programmable average output current. DC1821B operates with a 2.7V to 40V input voltage range. The demo board has been designed with the output voltage set to 5V and can provide up to 1A output with ...

Demo Board LTspice 

 

LT8335 4V to 16V Input, 5V SEPIC Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8304 18V to 80VIN/24VOUT Isolated Flyback Converter

Jun 9th 2016
The LT®8304 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external resistors and a third optional temperature compensation ...

Circuit 

 

LT8304 18V to 80VIN/48VOUT Isolated Flyback Converter

Jun 9th 2016
The LT®8304 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external resistors and a third optional temperature compensation ...

Circuit 

 

LT8304 –4V to –80VIN/12VOUT Buck-Boost Converter

Jun 9th 2016
The LT®8304 is a monolithic micropower isolated flyback converter. By sampling the isolated output voltage directly from the primary-side flyback waveform, the part requires no third winding or opto-isolator for regulation. The output voltage is programmed with two external resistors and a third optional temperature compensation ...

Circuit 

 

DC2324A-B - LT3753EFE Demo Board | Isolated Forward Converter, 18V ≤ VIN ≤ 36V; VOUT = 24V @ 5A

May 25th 2016
Demonstration circuits 2324A-A, 2324A-B, and 2324A-C are active clamp forward converters with synchronous rectification featuring the LT®3753. These circuits were designed to demonstrate the high level of performance, efficiency and small solution size attainable using this part. They operate at 240kHz. The DC2324A-A produces ...

Demo Board 

 

DC2435A-B - LTC7813EUH Demo Board | Sync Boost + Sync Buck, 4V ≤ VIN ≤ 56V; VOUT1 (Quasi Regulated) = 19V-28.6V @ 5A

May 13th 2016
Demonstration circuit DC2435A is a step-up/down supply featuring the LTC®7813EUH. The LTC7813 is a high performance dual output (buck and boost) synchronous DC/DC switching regulator controller. The board has three different configurations: DC2435A-A: Regulated output voltage of 24 Volt DC2435A-B: Narrowed output voltage ...

Demo Board 

 

DC2435A-A - LTC7813EUH Demo Board | Sync Boost + Sync Buck, 4V ≤ VIN ≤ 56V; VOUT1 = 24V @ 5A

May 13th 2016
Demonstration circuit DC2435A is a step-up/down supply featuring the LTC®7813EUH. The LTC7813 is a high performance dual output (buck and boost) synchronous DC/DC switching regulator controller. The board has three different configurations: DC2435A-A: Regulated output voltage of 24 Volt DC2435A-B: Narrowed output voltage ...

Demo Board 

 

DC2175A - LT3752IFE/LT8311IFE Demo Board | Forward Converter with Sync Rectification, 9V ≤ VIN ≤ 36V; Vout = 12V @ 13A

Apr 27th 2016
Demonstration circuit 2175A is an active clamp forward converter with synchronous rectification featuring the LT®3752/LT8311 chipset. This circuit was designed to demonstrate the high levels of performance, efficiency and high power. It operates at 200kHz and produces a regulated 12V, 13A output from a wide input voltage ...

Demo Board 

 

LTC7813 Wide Input Range to 12V/8A Low IQ Cascaded Boost+Buck Regulator (VMID = 14V)

Mar 16th 2016
The LTC®7813 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

LTC7813 Wide Input Range to 5V/8A Low IQ Cascaded Boost+Buck Regulator (VMID Boosted to 10V)

Mar 16th 2016
The LTC®7813 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

LTC7813 Wide Input Range to 24V/5A Low IQ Cascaded Boost + Buck Regulator (VMID = 28V)

Mar 16th 2016
The LTC®7813 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

LTC7813 Low EMI, Wide Input Range Pass-Through Cascaded Boost+Buck Regulator

Mar 16th 2016
The LTC®7813 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

DC2422A-C - LTC7812EUH Demo Board | Sync Boost + Sync Buck, 4V ≤ VIN ≤ 36V; VBoost = 12V, Vbuck = 12V to 5V @ 8A

Mar 11th 2016
Demonstration circuit DC2422A is a step-up + step-down DC/DC converter featuring the LTC®7812EUH, a high performance dual output (Boost + Buck) synchronous DC/ DC switching regulator controller. This board has a 4V to 36V input voltage range and three different output configurations. DC2422A-A generates a regulated 12V @ ...

Demo Board 

 

DC2422A-B - LTC7812EUH Demo Board | Sync Boost + Sync Buck, 4V ≤ VIN ≤ 36V; VOUT1 (Quasi Regulated) = 10V-16V @ 6-8A

Mar 11th 2016
Demonstration circuit DC2422A is a step-up + step-down DC/DC converter featuring the LTC®7812EUH, a high performance dual output (Boost + Buck) synchronous DC/ DC switching regulator controller. This board has a 4V to 36V input voltage range and three different output configurations. DC2422A-A generates a regulated 12V @ ...

Demo Board 

 

DC2422A-A - LTC7812EUH Demo Board | Sync Buck + Sync Boost, 4V ≤ VIN ≤ 36V; VOUT = 12V @ 8A

Mar 11th 2016
Demonstration circuit DC2422A is a step-up + step-down DC/DC converter featuring the LTC®7812EUH, a high performance dual output (Boost + Buck) synchronous DC/ DC switching regulator controller. This board has a 4V to 36V input voltage range and three different output configurations. DC2422A-A generates a regulated 12V @ ...

Demo Board LTpowerCAD 

 

DC2358A - LTM8068 Demo Board | 2kV AC Isolated μModule Flyback with LDO, 4.5V ≤ VIN ≤ 40V, Vout1 = 5.6V @ up to 460mA, Vout2 = 5V Post-Reg LDO

Mar 10th 2016
The Demo Circuit 2358A is a 2kV AC isolated flyback μModule® DC/DC converter with LDO post regulator featuring the LTM8068. The demo circuit is designed for a 5.6V flyback output and a 5V post regulator output from a 4.5V to 40V input. The current capability of the 5.6V flyback output (VOUT1) varies with input voltage ...

Demo Board LTspice 

 

DC2357A - LTM8067 Demo Board | 2kV AC Isolated Flyback μModule, 4.5V ≤ VIN ≤ 40V, Vout = 5V @ up to 500mA

Mar 10th 2016
The Demo circuit 2357A is a 2kV AC isolated flyback μModule® DC/DC converter featuring the LTM8067. The demo circuit is designed for a 5V flyback output from a 4.5V to 40V input. The typical current capability of the 5V flyback output varies with input voltage from about 200mA at 4.5VIN to about 500mA at 40VIN. See Figure ...

Demo Board LTspice 

 

DC2255A - LTC3106EUDC Demo Board | Buck-Boost, 0.35V ≤ VIN ≤ 5.1V; Vout = 1.8/2.2/3.3/5V @ 300mA

Feb 3rd 2016
Demonstration circuit DC2255A features the LTC®3106, an ultralow input voltage buck-boost DC/DC converter with automatic PowerPath™ management optimized for multisource, low power systems. The DC2255A has four user-selectable output voltages: 1.8V, 2.2V, 3.3V and 5V. Output current can be up to 300mA (for ...

Demo Board 

 

LT3759 1.8V to 5V Input, 3.3V/3A Output SEPIC Converter

Feb 2nd 2016
The LT®3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter. ...

Circuit 

 

LTM8067 2kVAC Isolated μModule Regulator

Feb 1st 2016
The LTM®8067 is a 2kVAC isolated flyback μModule® (power module) DC/DC converter. Included in the package are the switching controller, power switches, transformer, and all support components. Operating over an input voltage range of 2.8V to 40V, the LTM8067 supports an output voltage range of 2.5V to 24V, set by ...

Circuit LTspice 

 

LTC3106 Simple Wide Input Voltage Buck-Boost Converter

Dec 2nd 2015
The LTC®3106 is a highly integrated, ultralow voltage buckboost DC/DC converter with automatic PowerPath management optimized for multisource, low power systems. At no load, the LTC3106 draws only 1.6μA while creating an output voltage up to 5V from either input source. ...

Circuit 

 

LT8331 36V to 72V Input, 48V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit LTspice 

 

LT8331 4.5V to 80V Input, 12V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 4.5V to 80V Input, 5V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LTC7812 Wide Input Range to 12V/8A Low IQ, Cascaded Boost+Buck Regulator (VMID = 16V)

Oct 9th 2015
The LTC®7812 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

LTC7812 Wide Input Range to 5V/5A Low IQ Cascaded Boost + Buck Regulator (VMID Boosted to 10V)

Oct 9th 2015
The LTC®7812 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

LTC7812 Low EMI, Wide Input Range Pass-Through Cascaded Boost+Buck Regulator

Oct 9th 2015
The LTC®7812 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

DC2016A - LTM8054 Demo Board | uModule Sync Buck-Boost, 6V ≤ VIN ≤ 35V, Vout = 12V @ 1.8A to 3A

Sep 18th 2015
Demonstration circuit 2016A features the LTM8054, a synchronous buck-boost μModule regulator that accepts input voltages lower, higher or the same as the output, but is also highly efficient due to its four-switch architecture. The output for DC2016A is 12V and the input voltage range is 6V to 35V – see the LTM8054 ...

Demo Board LTpowerCAD LTspice 

 

LTM8054 24VOUT from 7.5VIN to 36VIN with 1.2A Accurate Current Limit

Aug 31st 2015
The LTM®8054 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

Circuit 

 

LTM8054 3.3VOUT from 6VIN to 36VIN with 2.6A Accurate Current Limit and Output Current Monitor

Aug 31st 2015
The LTM®8054 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

Circuit 

 

Two LTM8054s Paralleled to Get More Output Current - 12Vout @ 5A From 7V-36Vin

Aug 31st 2015
The LTM®8054 is a 36VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

Circuit 

 

LTC3335 Lithium-Thionyl Chloride Primary Battery Powered Application

Aug 31st 2015
The LTC®3335 is a high efficiency, low quiescent current (680nA) buck-boost DC/DC converter with an integrated precision coulomb counter which monitors accumulated battery discharge in long life battery powered applications. The buck-boost can operate down to 1.8V on its input and provides eight pin-selectable output voltages ...

Circuit 

 

LT3095 5V to 20V VIN with 5V and 12V Outputs and SEPIC on Channel 2 for Continuous Output Current

Aug 27th 2015
The LT®3095 generates two low-noise bias supplies from a common input voltage ranging from 3V to 20V. Each channel includes a fixed frequency, peak current-mode step-up switching regulator and a low-noise, singleresistor- programmable 50mA linear regulator. The linear regulator’s high power supply ripple rejection ...

Circuit 

 

DC2306A - LT3753EFE Isolated Demo Board | Forward Converter, 10V ≤ VIN ≤ 54V; VOUT = 48V or 54V (Jumper Selectable) @ 1.5A

Aug 24th 2015
Demonstration circuit 2306A is an active clamp forward converter featuring the LT®3753. This circuit was designed to demonstrate the high level of performance and efficiency that can be attained with the LT3753. It operates at 100kHz and produces a regulated 54V, 1.5A output from a wide input voltage range of 10V to 54V, ...

Demo Board LTspice 

 

LT8494 1.5MHz, 12V Output @ 0.5A SEPIC Converter

Aug 18th 2015
The LT®8494 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator. Quiescent current can be less than 7μA when operating and is ~0.3μA when SWEN is low. The LT8494 can be configured as either a SEPIC, boost or flyback converter. ...

Circuit 

 

LT8494 450kHz, Wide Input Range 12V Output @ 0.65A SEPIC Converter

Aug 18th 2015
The LT®8494 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator. Quiescent current can be less than 7μA when operating and is ~0.3μA when SWEN is low. The LT8494 can be configured as either a SEPIC, boost or flyback converter. ...

Circuit 

 

LT8330 8V to 30V Input, 24V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 4V to 16V Input, 5V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 4V to 36V Input, 12V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

DC2205A - LT8495 Demo Board | SEPIC, 3V ≤ VIN ≤ 60V, Vout = 5V @ 1A

Jun 8th 2015
Demonstration circuit 2205A is a monolithic SEPIC converter featuring LT®8495. The demo board is designed for 5V output from a 3V to 60V input at 450kHz switching frequency. The max output current is 1A when the input voltage is above 12V, and is reduced with lower input voltage. The LT8495 is a monolithic switching regulator ...

Demo Board LTspice 

 

DC2268A-E - LTM4630EY-1 Demo Board | 1.5" x 1.2" PCB, Dual 18A/Single 36A Buck μModule Regulator, 4.5V≤VIN≤15V, Vout1 = 1V @ 18A, Vout2 = 1.5V @ 18A

May 12th 2015
Demonstration circuit 2268A-E is a high efficiency, high density, dual 18A, switch mode step-down power supply on a compact 1.5" × 1.2" PCB. It features the LTM4630-1 μModule regulator. The input voltage is from 4.5V to 15V. The output voltage is programmable from 0.6V to 1.8V. DC2268A-E can deliver up to 18A maximum ...

Demo Board LTspice 

 

LT8495 450kHz, 5V Output SEPIC Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

Circuit LTspice 

 

LT8495 450kHz, Wide Input Range 12V Output SEPIC Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

Circuit 

 

DC2148A - LT8709EFE Demo Board | Negative Buck-Boost, -38V ≤ VIN ≤ -4.5V; VOUT = -12V @ 5A

Apr 3rd 2015
Demonstration circuit 2148A features the LT®8709, a negative input synchronous multi-topology DC/DC controller designed for negative input power supplies where the highest input supply voltage is ground. Examples of these circuits include negative buck, negative boost, negative buck-boost and negative inverting. The DC2148A ...

Demo Board LTspice 

 

LTM8056 24Vout from 7Vin to 58Vin Buck-Boost Regulator

Mar 19th 2015
The LTM®8056 is a 58VIN, buck-boost μModule® (micromodule) regulator. Included in the package are the switching controller, power switches, inductor and support components. A resistor to set the switching frequency, a resistor divider to set the output voltage, and input and output capacitors are all that are needed ...

Circuit LTspice 

 

Too many results please adjust your filters