1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - Step-Up (Boost) Regulators

Terasic DE10-Nano Kit

Sep 26th 2017
The Terasic DE10-Nano is a development kit based on an Intel Cyclone V SoC which combines the power of a Cyclone V FPGA with a dual-core ARM Cortex-A9 processor. Analog Devices offers many plug-in boards that let you extend the functionality of the kit. Whether you want to measure real-world phenomena such as toxic gases or ...

Circuit LTpowerPlanner 

 

LTC3897 High Efficiency 2-Phase 24V Boost Converter with In-Rush Current Control, Overcurrent Protection, Input Voltage Surge Protection and Reverse Input Protection

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

LTC3897 High Efficiency 2-Phase 48V Boost Converter with Reverse Input Protection (Surge Stopper Controller Not Used)

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

LTC3897 High Efficiency 2-Phase 48V Boost Converter with Overcurrent Protection (Ideal Diode and Surge Stopper Controllers at the Output)

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

LTC3897 Nonsynchronous 107V/1.5A 2-Phase Boost Converter with In-Rush Current Control, Overcurrent Protection, Input Voltage Surge Protection and Reverse Input Protection

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

LT3759 Wide Vin, 48V @ >100mA Output Boost Converter that Works Down to 1.6V

Christopher Jarboe - Associate Applications Engineer Oct 3rd 2016
The LT®3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter. An internal LDO regulator draws power from VIN or DRIVE to provide up to a 4.75V supply for ...

Blog Post Circuit LTspice 

 

LTC3130 Single-Cell 1.2V, 200mA Buck-Boost Converter

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

Circuit 

 

LT8335 3V to 6V Input, 24V Boost Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8335 3V to 6V Input, 12V Boost Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8335 8V to 16V Input, 24V Boost Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8335 4V to 16V Input, –5V Inverting Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8335 4V to 16V Input, 5V SEPIC Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8335 5V to 12V Input, –12V Inverting Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8335 4V to 16V Input, ±5V Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT3759 1.8V to 3.3V Input, 5V/2A Output Boost Converter

Feb 2nd 2016
The LT®3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter. ...

Circuit 

 

LT3759 8V to 16V Input, 24V/2A Output Boost Converter

Feb 2nd 2016
The LT®3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter. ...

Circuit 

 

LT3759 1.8V to 5V Input, 3.3V/3A Output SEPIC Converter

Feb 2nd 2016
The LT®3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter. ...

Circuit 

 

LT3759 5V to 15V Input, –5V/3A Output Inverting Converter

Feb 2nd 2016
The LT®3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter. ...

Circuit 

 

LT3759 1.8V to 5V Input, –5V/2A Output Inverting Converter

Feb 2nd 2016
The LT®3759 is a wide input range, current mode, DC/DC controller which is capable of regulating either positive or negative output voltages from a single feedback pin. It can be configured as a boost, SEPIC or inverting converter. ...

Circuit 

 

LT3463 Dual Output ±20V Converter

Feb 1st 2016
The LT3463/LT3463A are dual micropower DC/DC converters with internal Schottky diodes in a 10-lead 3mm x 3mm DFN package. Negative and positive LT3463 converters have a 250mA current limit. The LT3463A positive converter also has a 250mA limit, while the negative converter has a 400mA limit. Both devices have an input voltage ...

Circuit 

 

LT8331 36V to 72V Input,120V Boost Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit LTspice 

 

LT8331 9V to 16V Input, 135V Boost Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 10V to 48V Input, 240V Boost Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 36V to 72V Input, 48V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit LTspice 

 

LT8331 4.5V to 80V Input, 12V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 4.5V to 80V Input, 5V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 36V to 72V Input, –24V Inverting Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 4.5V to 80V Input, –12V Inverting Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 4.5V to 80V Input, –5V Inverting Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LT8331 40V to 80V Input, 5V Isolated Output Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at very ...

Circuit 

 

LTC7812 Wide Input Range to 12V/8A Low IQ, Cascaded Boost+Buck Regulator (VMID = 16V)

Oct 9th 2015
The LTC®7812 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

LTC7812 Wide Input Range to 5V/5A Low IQ Cascaded Boost + Buck Regulator (VMID Boosted to 10V)

Oct 9th 2015
The LTC®7812 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

LTC7812 Low EMI, Wide Input Range Pass-Through Cascaded Boost+Buck Regulator

Oct 9th 2015
The LTC®7812 is a high performance synchronous Boost+Buck DC/DC switching regulator controller that drives all N-channel power MOSFET stages. It contains independent step-up (boost) and step-down (buck) controllers that can regulate two separate outputs or be cascaded to regulate an output voltage from an input voltage that ...

Circuit 

 

Terasic DE0-Nano-SoC Kit / Atlas-SoC Kit

Oct 5th 2015
The DE0-Nano-SoC Development Kit presents a robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability ...

Circuit 

 

LT3095 5V to 20V VIN with 5V and 12V Outputs and SEPIC on Channel 2 for Continuous Output Current

Aug 27th 2015
The LT®3095 generates two low-noise bias supplies from a common input voltage ranging from 3V to 20V. Each channel includes a fixed frequency, peak current-mode step-up switching regulator and a low-noise, singleresistor- programmable 50mA linear regulator. The linear regulator’s high power supply ripple rejection ...

Circuit 

 

LTC3121 2 AA Cell to 12V Synchronous Boost Converter, 100mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down to ...

Circuit 

 

LTC3121 3.3V to 12V, 2MHz Synchronous Boost Converter with Output Disconnect, 250mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down to ...

Circuit 

 

LTC3121 USB/Battery Powered Synchronous Boost Converter, 4.3V to 5V, 500mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down to ...

Circuit 

 

LTC3121 5V to Dual Output Synchronous Boost Converter, ±15V @ 140mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down to ...

Circuit 

 

LTC3121 Single Li-Cell 3-LED Driver, 2.5V/4.2V to 175mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down to ...

Circuit 

 

LTC3121 Dual Supercapacitor Backup Power Supply, 0.5V to 5V

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down to ...

Circuit 

 

LT8494 1.5MHz, 12V Output @ 0.5A SEPIC Converter

Aug 18th 2015
The LT®8494 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator. Quiescent current can be less than 7μA when operating and is ~0.3μA when SWEN is low. The LT8494 can be configured as either a SEPIC, boost or flyback converter. ...

Circuit 

 

LT8494 450kHz, Wide Input Range 12V Output @ 0.65A SEPIC Converter

Aug 18th 2015
The LT®8494 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator. Quiescent current can be less than 7μA when operating and is ~0.3μA when SWEN is low. The LT8494 can be configured as either a SEPIC, boost or flyback converter. ...

Circuit 

 

LT8330 3V to 6V Input, 48V Boost Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 8V to 16V Input, 24V Boost Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 8V to 30V Input, 24V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 3V to 6V Input, 24V Boost Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 4V to 16V Input, 5V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 4V to 36V Input, 12V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 8V to 30V Input, –24V Inverting (Cuk) Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 4V to 36V Input, –12V Inverting (Cuk) Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 4V to 16V Input, –5V Inverting Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8330 8V to 40V Input, ±15V Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

Circuit 

 

LT8495 450kHz, 5V Output SEPIC Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

Circuit LTspice 

 

LT8495 750kHz, 16V to 32V Input, 48V Output, 0.5A Boost Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

Circuit 

 

LT8495 Li-Ion to 12V, Low Q Current Boost @ 650kHz

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

Circuit 

 

LT8495 Low Q Current, 5V to 300V, 250kHz Flyback Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

Circuit 

 

LT8495 450kHz, Wide Input Range 12V Output SEPIC Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

Circuit 

 

LTC3899 High Efficiency Triple 24V/3.3V/5V Converter with 10V Gate Drive

Feb 24th 2015
The LTC®3899 is a high performance triple output (buck/ buck/boost) DC/DC switching regulator controller that drives all N-channel synchronous power MOSFET stages. The constant frequency current mode architecture allows a phase-lockable frequency of up to 850kHz. The LTC3899 operates from a wide 4.5V to 60V input supply ...

Circuit 

 

LT8570 1.5MHz, 5V to 12V Boost Converter

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570 700kHz, –15V Output Inverting Converter Accepts 5V to 35V Input

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570-1 700kHz, –15V Output Inverting Converter Accepts 5V to 35V Input

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570 1MHz Inverting Converter Generates –48V Output From 12V Input

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570 VFD (Vacuum Fluorescent Display) Power Supply Switches at 1MHz

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570 1.2MHz Charge Pump Creates ±12V From a Single Lithium Ion Battery

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570-1 1MHz Boost Converter Generates 24V from 5V-12V Input

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570 1MHz Boost Converter Generates 24V from 5V-12V Input

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570-1 12V Battery Stabilizer Survives 40V Transients

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570 12V Battery Stabilizer Survives 40V Transients

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8570 1.2MHz Boost Converter Creates 48V @ 50mA from 9V-16V Input

Feb 2nd 2015
The LT®8570 and LT8570-1 are PWM DC/DC converters. The LT8570 contains a 0.5A, 65V power switch, while the LT8570-1 contains a 0.25A, 65V power switch. The LT8570 and LT8570-1 can be configured as either a boost, SEPIC or inverting converter. ...

Circuit 

 

LT8709 250kHz, –16V to –30V Input to –12V Output, Negative Buck Converter Delivers Up to 8.5A Output Current

Jan 29th 2015
The LT®8709 is a synchronous PWM controller for negativeto- negative or negative-to-positive DC/DC conversion, with rail-to-rail output current monitor and control. The LT8709 is ideal for many local power supply designs. It can be easily configured in buck, boost, buck-boost, and inverting topologies with negative input ...

Circuit LTspice 

 

LT8709 200kHz, –4.5V to –42V Input to 5V/4A Output Negative Inverting Converter

Jan 29th 2015
The LT®8709 is a synchronous PWM controller for negativeto- negative or negative-to-positive DC/DC conversion, with rail-to-rail output current monitor and control. The LT8709 is ideal for many local power supply designs. It can be easily configured in buck, boost, buck-boost, and inverting topologies with negative input ...

Circuit LTspice 

 

LT8709 400kHz, Negative Buck-Boost Converter Generates a –24V/2.5A Output from a –15V to –30V Input

Jan 29th 2015
The LT®8709 is a synchronous PWM controller for negativeto- negative or negative-to-positive DC/DC conversion, with rail-to-rail output current monitor and control. The LT8709 is ideal for many local power supply designs. It can be easily configured in buck, boost, buck-boost, and inverting topologies with negative input ...

Circuit 

 

LT8709 High Power 300kHz, Negative Boost Converter Generates a –12V/4.5A Output from a –4.5V to –9V Input

Jan 29th 2015
The LT®8709 is a synchronous PWM controller for negativeto- negative or negative-to-positive DC/DC conversion, with rail-to-rail output current monitor and control. The LT8709 is ideal for many local power supply designs. It can be easily configured in buck, boost, buck-boost, and inverting topologies with negative input ...

Circuit LTspice 

 

LT8709 250kHz, Wide Input Range, Buck-Boost Converter Generates a –5V Output with Up to 7A Output Current

Jan 29th 2015
The LT®8709 is a synchronous PWM controller for negativeto- negative or negative-to-positive DC/DC conversion, with rail-to-rail output current monitor and control. The LT8709 is ideal for many local power supply designs. It can be easily configured in buck, boost, buck-boost, and inverting topologies with negative input ...

Circuit 

 

LTC4000 6V to 21V at 5A Boost Converter 5-Cell Li-Ion Battery Charger with C/10 Termination and 0.55A Trickle Charge Current

Sep 23rd 2014
The LTC®4000 is a high voltage, high performance controller that converts many externally compensated DC/DC power supplies into full-featured battery chargers. ...

Circuit 

 

LTC4000 8V to 72V IN to 4.2V at 2.0A Isolated Flyback Single-Cell Li-Ion Battery Charger with 2.9h Timer Termination and 0.22A Trickle Charge Current

Sep 23rd 2014
The LTC®4000 is a high voltage, high performance controller that converts many externally compensated DC/DC power supplies into full-featured battery chargers. ...

Circuit 

 

LTC3788 Generates High Voltages Using a Two-Stage Boost Converter

Victor Khasiev - Applications Engineer
Gabino Alonso - Strategic Marketing Engineer
Sep 17th 2014
Generating high voltages from low level sources is not an easy task. Engineers are facing the following problems when they try to implement single stage boost at high step-up ratios. Limitation of maximum duty cycle in boost controllers Sharp decrease in efficiency at long duty cycles High peak currents and EMI challenges ...

Blog Post Circuit LTspice 

 

LTC3786: High Efficiency Li-Ion Battery-to-USB Boost Converter

Goran Perica - Power Applications Section Leader
Gabino Alonso - Strategic Marketing Engineer
Sep 16th 2014
The LTC®3786 is a high performance synchronous boost converter controller that drives all N-channel power MOSFETs. Synchronous rectification increases efficiency, reduces power losses and eases thermal requirements, enabling the LTC3786 to be used in high power boost applications. A 4.5V to 38V input supply range encompasses ...

Blog Post Circuit LTspice 

 

LT1615 1-Cell Li-Ion to 3.3V SEPIC Converter

Sep 12th 2014
The LT1615/LT1615-1 are micropower step-up DC/DC converters in a 5-lead low profile (1mm) ThinSOT package. The LT1615 is designed for higher power systems with a 350mA current limit and an input voltage range of 1.2V to 15V, whereas the LT1615-1 is intended for lower power and single-cell applications with a 100mA current limit ...

Circuit LTspice 

 

Too many results please adjust your filters