Solutions Search - Quad or More Supply Monitors

DC2450A-B - LTC2936 SSOP-24 Package Socketed Programming Board [requires DC1613]

Jan 25th 2016
The DC2450A programming board contains the circuitry needed to program and verify the EEPROM of the LTC®2936. This is its sole purpose. The LTC2936 comes in either a 24-pin SSOP or a 24-pin QFN package. The DC2450A-A supports the QFN and the DC2450A-B supports the SSOP package. ...

 

DC2450A-A - LTC2936 QFN-24 Package Socketed Programming Board [requires DC1613]

Jan 25th 2016
The DC2450A programming board contains the circuitry needed to program and verify the EEPROM of the LTC®2936. This is its sole purpose. The LTC2936 comes in either a 24-pin SSOP or a 24-pin QFN package. The DC2450A-A supports the QFN and the DC2450A-B supports the SSOP package. ...

 

DC2293A-B - LTC2933 DFN-16 Package Socketed Programming Board [requires DC1613]

Jan 25th 2016
The DC2293A programming board contains the circuitry needed to program and verify the EEPROM of the LTC2933. This is its sole purpose. The LTC®2933 comes in either a 16-pin SSOP or a 16-pin DFN package. The DC2293A-A supports the SSOP and the DC2293A-B supports the DFN package. ...

 

DC2293A-A - LTC2933 SSOP-16 Package Socketed Programming Board [requires DC1613]

Jan 25th 2016
The DC2293A programming board contains the circuitry needed to program and verify the EEPROM of the LTC2933. This is its sole purpose. The LTC®2933 comes in either a 16-pin SSOP or a 16-pin DFN package. The DC2293A-A supports the SSOP and the DC2293A-B supports the DFN package. ...

 

DC1029B - LTC2928, 4-ch sequencer and supervisor w/ fault rep

Jan 4th 2016
Demonstration circuit 1029B is for evaluating the performance of the LTC®2928 Multichannel Power Supply Sequencer and Supervisor. The LTC2928 sequences and monitors up to four power channels in power-up and power-down, and it monitors those outputs in the steady state. Sequencing is accomplished by controlling the power ...

 

Power Supply Sequencing Simplified

Nathan Enger - Senior Applications Engineer Dec 7th 2015
Design Note 1037: Introduction Designing a multiple power supply system is challenging. The power supply designer’s workload multiplies with each additional supply rail. The designer must consider the dynamic environment of coordinated power supply sequencing and timing, generating power-on reset, monitoring for faults ...

 

DC2347A - LTC2937 Socketed Programming Board [requires DC1613]

Sep 30th 2015
The DC2347A contains only those functions necessary to safely program and verify the LTC2937 configuration EEPROM. It serves no other purpose. The DC2347A holds the LTC2937 in a clamshell socket for convenient access and replacement of parts. The LTpowerPlay™ GUI software, running on a PC, provides a simple interface to ...

 

Flexible Six-Supply Sequencer Offers Nonvolatile Configuration & Fault Logging

Sep 28th 2015
MILPITAS, CA - September 28, 2015 - Linear Technology Corporation introduces the LTC2937, a programmable power supply sequencer and voltage supervisor, with built-in EEPROM, for six voltage rails. The LTC2937 is designed to carefully supervise and control FPGA/ASIC/microprocessor point-of-load supplies, which require tight accuracy ...

 

DC1605B - LTC2936CGN Demo Board: Programmable Hex Voltage Supervisor with EEPROM and Comparator Outputs [Requires DC1613]

Mar 25th 2015
The DC1605B is a demonstration system that showcases the LTC®2936, a 6-channel I2C/SMBus voltage supervisor with EEPROM. The LTC2936 simultaneously monitors up to six power supply voltages and detects undervoltage and overvoltage conditions. In addition the LTC2936 monitors two GPI pins and is able to drive three GPIO pins ...

 

DC1633B - LTC2933IGN Demo Board - Programmable Hex Voltage Supervisor with EEPROM (Requires DC1613)

Nov 10th 2014
The DC1633B is a demonstration system that showcases the LTC®2933, a 6-channel I2C/SMBus voltage supervisor with EEPROM. The LTC2933 simultaneously monitors up to six power supply voltages and detects under/overvoltage conditions. In addition the LTC2933 monitors two GPI pins and is able to drive three GPIO pins to indicate ...

 

A Guide to Ordering Custom Programmed Digital Power System Management Devices

Bruce Haug - Product Marketing Engineer Oct 30th 2014
Digital power system management is being adopted in the marketplace because of its ability to provide accurate information about the power system and to autonomously control and supervise dozens of voltage rails with ease. Having digital control over analog power supplies with a simple PC connection is valuable during the ...

 

Guide To Ordering LTC's Custom-Programmed EEPROM Devices

Bruce Haug - Product Marketing Engineer Sep 11th 2014
  Click Here To Order Custom Programmed Parts Welcome to Linear Technology’s NVM (Non-Volatile Memory) Programming Service video product brief tutorial for Digital Power System's Management Products. This tutorial will go through the process of ordering custom-programmed first articles or prototypes. Devices eligible ...

 

Programmable Hex Voltage Supervisor Has 1% Threshold Accuracy & Built-In EEPROM

Apr 22nd 2014
MILPITAS, CA - April 22, 2014 - Linear Technology Corporation introduces the LTC2933 programmable voltage supervisor with built-in EEPROM for simultaneous, accurate monitoring of up to six voltage rails from 0.2V to 13.9V. Requiring no external resistors to set thresholds, the LTC2933 provides an I²C/SMBus interface to access onboard ...

 

LTC2933 Low Cost Multipoint Temperature Control System

Apr 2nd 2014
The LTC®2933 is an EEPROM configurable voltage supervisor which can simultaneously monitor up to six power supply voltage inputs. Each voltage detector offers programmable over/undervoltage thresholds in various ranges and increments. ...

 

Configurable Supply Monitor Integrates Adjustable Watchdog & Reset Timers for Multi-Rail Systems

Aug 24th 2009
MILPITAS, CA - August 24, 2009 - Linear Technology Corporation introduces the LTC2939, a 6-channel supply monitor with processor supervisory functions that can be configured for low voltage applications down to 1.2V. One of sixteen preset or adjustable voltage threshold combinations can be selected, all of which maintain an ...

 

Configurable Six-Channel Supervisor Includes Individual Comparator Outputs & Selectable Supply Tolerances

Feb 13th 2008
MILPITAS, CA - February 13, 2008 - Linear Technology Corporation introduces the LTC2932, a six-channel supply monitor that includes separate open-drain voltage comparator outputs for individual supply monitoring. The LTC2932 is designed for monitoring network servers, telecom and industrial equipment with numerous supply voltage ...

 

Single/Dual/Quad/Octal Precision Voltage Monitors Guaranteed to +125°C

Nov 7th 2007
MILPITAS, CA - November 7, 2007 - Linear Technology Corporation introduces a family of single, dual, quad, and octal voltage monitors that guarantee operation across -40°C to +125°C. The LTC2910, LTC2912, LTC2913 and LTC2914 all feature a threshold accuracy of ±1.5% over the automotive temperature range, allowing them to ...

 

Octal Supply Supervisor Monitors Positive & Negative Voltages

Sep 6th 2006
MILPITAS, CA - September 6, 2006 - Linear Technology Corporation introduces the LTC2910, a low power voltage monitoring circuit with eight individual undervoltage monitoring inputs. Featuring adjustable inputs with a 0.5V threshold and a tight 1.5% threshold accuracy over the entire temperature range, the LTC2910 greatly simplifies ...

 

Quad Under-and-Over Voltage Monitor for Positive & Negative Supplies Offers Versatility & Precision

Jul 20th 2006
MILPITAS, CA - July 20, 2006 - Linear Technology Corporation introduces the LTC2914, a precision quad input voltage monitor with four separate undervoltage (UV) and overvoltage (OV) inputs, designed for systems with multiple supplies. The IC offers a versatile and precise solution for voltage monitoring by giving the user the ...

 

Quad Power Supply Sequencer & Supervisor Provides Simple Configuration & Extensive Diagnostics Without Software

Jun 14th 2006
MILPITAS, CA - June 14, 2006 - The LTC2928 quad supply sequencer and supervisor from Linear Technology offers the flexibility to configure the power supply turn-on and turn-off sequence, monitor the supplies and diagnose supply failures. The device's simple pin-configuration approach to sequencing requires no firmware and allows ...