1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - Power Management

DC2605A - LTC3884ERHE-1, LTC3874EUF-1 Polyphase Single 120A Output Synchronous Buck Converter with Power System Management

Feb 23rd 2018
Demonstration circuit 2605A is a high efficiency, high density, single-output buck converter with 7V to 14V input range. The output voltage is adjustable from 0.5V to 1.5V, and can supply up to 120A of load current with a 1V output. The demo board features the LTC®3884-1paired with a slave controller LTC3874-1 to provide ...

Demo Board 

 

DC2464A-A - LTC3351EUFF Hot Swappable Supercapacitor Charger, Backup Controller and System Monitor

Feb 23rd 2018
Demonstration circuit 2464A-A/2464A-B is a supercapacitor charger and backup controller with a hot swappable front end plus supercapacitor health and system monitoring; featuring the LTC®3351. The LTC3351 includes a buck supercapacitor charger and a backup boost controller. It has dual input hot swap FETs to control the ...

Demo Board 

 

DC2350A - LTC6813ILWE-1 Demo board | 18 Channel Multicell Battery Stack Monitor with Daisy Chain isoSPI Interface

Feb 23rd 2018
Demonstration circuit 2350A is a multicell battery stack monitor featuring the LTC®6812-1, a 15-cell monitor on the DC2350A-A, or the LTC6813-1, an 18-cell monitor on the DC2350A-B. Multiple boards can be linked through a 2-wire isolated serial interface (isoSPI) to monitor any number of cells in a stack. The demo circuit ...

Demo Board 

 

DC2736A - LTC7800EUDC Demo Board With GaNFETS/500kHz | 30V ≤ VIN ≤ 55V; VOUT = 12V @ 20A

Feb 22nd 2018
Demo circuit 2637A features four LT®3045EDD-1s in parallel, generating an ultralow noise, ultrahigh power supply rejection ratio (PSRR) low dropout (LDO) regulator with programmable current limit. DC2637A operates over an input range of 3.8V to 20V, and is capable of delivering up to 2A output current by paralleling four ...

Demo Board 

 

DC2527A - LTM4646 Demo Board | 4.5V ≤ Vin ≤ 20V, Vout1=1.2V@10A, Vout2=1.5V@10A

Feb 22nd 2018
Demonstration circuit 2527A-B features the LTM®4646EY, a dual 10A or single 20A high efficiency, switch mode step-down power μModule regulator. The input voltage range is from 4.5V to 20V. With CPWR bias, input voltage can be as low as 2.375V. The output voltage range is 0.6V to 5.5V. De-rating is necessary for certain ...

Demo Board 

 

150VIN & VOUT Synchronous 4-Switch Buck-Boost Controller with Integrated Switching Bias Supply

Feb 12th 2018
NORWOOD, MA – February 12, 2018 – Analog Devices announces the Power by Linear™ LTC3777, a 150V high efficiency (up to 99%) 4-switch synchronous buck-boost DC/DC controller, which operates from input voltages above, below or equal to the regulated output voltage. Its 4.5V to 150V input voltage range operates ...

Press Release 

 

DC2616A - LTM4645 Demo Board | 50A Poly Phase Step-Down Regulator (Dual LTM4645)

Feb 9th 2018
Demonstration circuit 2616A-A features a polyphase design using the LTM®4645EY, a 25A high efficiency, switch mode step-down power μModule regulator. The input voltage range is from 6V to 15V. To use DC2616A-A for input voltage range from 4.7V to 6V, connect INTVCC to SVIN (change R22, R42 from OPT to 0Ω), DRVCC to ...

Demo Board 

 

AN170 - Honing the Adjustable Compensation Feature of Power System Management Controllers

Feb 8th 2018
For More Information, Download the Complete Application Note "AN170 - Honing the Adjustable Compensation Feature of Power System Management Controllers" INTRODUCTION This application note introduces methods for tuning the adjustable compensation of the LTC®3886 to achieve optimal phase margin, bandwidth and transient response. ...

Blog Post 

 

AN168 - Implementing Fast Telemetry with Power System Management Controllers

Feb 8th 2018
For More Information, Download the Complete Application Note "AN168 - Implementing Fast Telemetry with Power System Management Controllers" INTRODUCTION The second-generation Power System Management (PSM) Controllers, such as the LTC®3887, introduce new features for fast telemetry1. Fast telemetry allows firmware to ...

Blog Post 

 

DC2620A - LTC7106EDDB Demo Board | 7-Bit IDAC with PMBus interface to adjust VOUT of a Regulator

Feb 8th 2018
Demonstration circuit 2620A-A uses the LTC7106EDDB, a precision, bidirectional, 7-Bit current DAC with PMBus interface and can be used to adjust the output voltage of any conventional VFB referenced regulator. The LTC7106 can work with the vast majority of power management controllers, regulators or modules to enable digital ...

Demo Board 

 

DC2112A - LTC3649EUFD Demo Board | 4V ≤ VIN ≤ 60V; VOUT = 3.3V or 5V @ 4A

Feb 2nd 2018
Demonstration circuit 2112A is a high input voltage, high efficiency synchronous monolithic buck converter featuring the LTC3649 in a 28-lead UFD package. The DC2112A has wide input voltage range from 3.1V up to 60V. The output voltage of the DC2112A can be set as to 3.3V or 5V. However, the “USER SELECT” option ...

Demo Board LTspice 

 

DC2738A - LTC7815EUHF Demo Board | 4.5V ≤ VIN ≤ 36V; VOUT1: 5V @ 8A, VOUT2: 3.3V @ 8A, VOUT3: 10V @ 7A

Feb 2nd 2018
Demonstration circuit 2738A is a triple output synchronous step-up/dual step-down supply featuring the LTC®7815. The demonstration circuit is designed for two buck 5V/8A, 3.3V/8A outputs supplied by a boost 10V/7A output. Benefiting from this feature, the buck outputs are able to maintain regulation over a wide input voltage ...

Demo Board 

 

Compact Dual 10A or Single 20A μModule Regulator Powers FPGAs, GPUs, ASICs & System Power

Jan 31st 2018
NORWOOD, MA – January 31, 2018 – Analog Devices announces the Power by Linear™ LTM4646, a dual 10A or single 20A output, step-down µModule® point-of-load regulator from 5V or 12V input supply rails. The LTM4646 includes the inductors, MOSFETs, a DC/DC controller and supporting components, and is housed ...

Press Release 

 

Triple Output, Buck/Buck/Boost Synchronous DC/DC Controller Operates up to 2.25MHz in Automotive Start/Stop Systems with 28μA IQ

Jan 29th 2018
NORWOOD, MA – January 29, 2018 – Analog Devices announces the Power by Linear™ LTC7815, a high frequency (up to 2.25MHz) triple output (buck, buck, boost), synchronous DC/DC controller that maintains all output voltages in regulation during automotive cold crank conditions. A 12V automotive battery can droop ...

Press Release 

 

DC2517A - LT8362 Demo Board | 4.5V to 42VIN Low EMI Inverter, VOUT = -12V @ Up to 1A, 2MHz fSWITCH

Jan 25th 2018
Demonstration circuit 2517A features the LT®8362 in a CUK configuration. It operates with a switching frequency of 2MHz and is designed to convert a 4.5V to 42V source to –12V, with up to 1A output current (depending on input voltage). Refer to Figure 4 for load current versus input voltage. The LT8362 can operate ...

Demo Board 

 

DC2637A - LT3045EDD-1 Demo Board | 20V, 2A (4 ICs in Parallel) Ultralow Noise, Ultrahigh PSRR LDO Regulator

Jan 25th 2018
Demo circuit 2637A features four LT®3045EDD-1s in parallel, generating an ultralow noise, ultrahigh power supply rejection ratio (PSRR) low dropout (LDO) regulator with programmable current limit. DC2637A operates over an input range of 3.8V to 20V, and is capable of delivering up to 2A output current by paralleling four ...

Demo Board 

 

DC1104B - LTC4009-2 Multicell Li-Ion Battery Charger Board

Jan 25th 2018
Demonstration circuit 1104B is a single-battery standalone charge controller with built-in charge termination featuring the LTC®4009-2. The input voltage is 13.5V to 20V. The charger output voltage is programmed by jumpers to support 1-, 2-, 3- and 4-cell Li-Ion batteries with a cell voltage of 4.2V/cell. The maximum charge ...

Demo Board 

 

35V Hot Swappable Supercapacitor Backup Power Controller Provides Uninterrupted Power, Protection & Monitoring

Jan 24th 2018
NORWOOD, MA – January 24, 2018 – Analog Devices announces the Power by Linear™ LTC3351, a supercapacitor charger and backup power controller IC that includes hot swap front-end protection and all the features necessary to provide a complete, standalone capacitor-based backup power solution. The LTC3351's integrated ...

Press Release 

 

Control VOUT of Any DC/DC Regulator with a Serial PMBus Interface

Jan 22nd 2018
NORWOOD, MA – January 22, 2018 – Analog Devices announces the Power by Linear™ LTC7106, a PMBus I²C controlled precision bidirectional current DAC designed to adjust the output voltage of virtually any DC/DC regulator. Through its PMBus compatible interface, the LTC7106 receives a 7-bit serial code and ...

Press Release 

 

DC2469A - LT8603 Demo Board | 42V, Low IQ, Quad Output Triple Monolithic Buck Converter with Boost Channel as SEPIC

Jan 19th 2018
Demonstration circuit 2469A features the LT®8603 with triple monolithic buck regulators and the boost channel as SEPIC. The demo circuit is designed for 8V, 5V, 3.3V, and 1.8V outputs from a nominal 12V input. The 4th channel is set as a SEPIC converter and its output is regulated at 8V over a wide input range. The two high ...

Demo Board 

 

DC2578A - Total Power Management: Hot Swap, Intermediate Bus Voltage, Point-of-Load (featuring LTC4281, LTC3886, LTC3887, LTC2975) [requires DC1613]

Jan 18th 2018
The DC2578A is a complete power chain, including a hot swap controller, an intermediate bus controller, and six point-of-load channels with power system management. The board demonstrates how to safely transfer power from a backplane, through an LTC4281 hot swap controller, through an LTC3886 step-down intermediate bus controller ...

Demo Board LTpowerPlay 

 

DC2114A - LT8603 Demo Board | 42V, Quad Output Triple Monolithic Buck Converter and Boost Controller

Jan 10th 2018
Demonstration Circuit 2114A features the LT®8603 with triple monolithic buck regulators and a boost controller. The demo circuit is designed for 8.0V, 5.0V, 3.3V, and 1.8V outputs from a nominal 12V input. The 4th channel is set as a boost converter and is powered from a wide input range with output VOUT4 regulated at 8V ...

Demo Board LTspice 

 

ADI 72V Hybrid Step-Down DC/DC Controller Reduces Solution Size by 50% Compared to Traditional Architectures

Jan 9th 2018
NORWOOD, MA – January 9, 2018 – Analog Devices announces the Power by Linear™ LTC7821, an industry first hybrid step-down synchronous controller that merges a switched capacitor circuit with a synchronous step-down controller, enabling up to a 50% reduction in DC/DC converter solution size compared to traditional ...

Press Release 

 

DC1496B-D - LTC2942-1 Demo Board | Battery Gas Gauge w/ I2C (req. DC590)

Jan 2nd 2018
Demonstration circuit 1496C-A (Figure 1) features the LTC®2941. Demonstration circuit 1496C-B features the LTC2942. Demonstration circuit 1496C-C features the LTC2941-1. Demonstration circuit 1496C-D features the LTC2942-1. The C, D options have parts that use an internal sense resistor while the A, B options rely on an ...

Demo Board 

 

Analog Devices’ 2MHz Boost/SEPIC/Inverter Features 4A, 60V Power Switch & 9μA IQ

Dec 18th 2017
NORWOOD, MA – December 18, 2017 – Analog Devices, Inc. announces the Power by Linear™ LT8364, a current mode, 2MHz step-up DC/DC converter with an internal 4A, 60V switch. It operates from an input voltage range of 2.8V to 60V, and is suitable for applications with input sources ranging from a single-cell Li-Ion ...

Press Release 

 

DC2721A-B - LTM4625EY Demo Board | 20Vin, 5A Step-Down μModule Regulator Configured as Inverting Output. -0.9Vout to -5.2Vout

Dec 11th 2017
Demonstration circuit 2721A-B features the LTM®4625EY μModule® regulator, a tiny high performance high efficiency step-down regulator configured as an inverting buck-boost regulator. DC2721A-B has an operating input voltage range of 4V to 15V and is able to provide an output current of up to 3A. The output voltage ...

Demo Board LTspice 

 

DC2721A-A - LTM4623EY Demo Board | 20Vin, 3A Step-Down μModule Regulator Configured as Inverting Output. -0.9Vout to -5.2Vout

Dec 11th 2017
Demonstration circuit 2721A-A features the LTM®4623 μModule® regulator, a tiny high performance high efficiency step-down regulator configured as an inverting buck-boost regulator. The DC2721A-A has an operating input voltage range of 4V to 15V and is able to provide an output current of up to 2A. The output voltage ...

Demo Board LTspice 

 

DC2513A - LTC7821EUH Demo Board | 36V ≤ VIN ≤ 72V; VOUT = 12V @ 20A, 97.5% Efficiency/500kHz

Dec 7th 2017
Demonstration circuit 2513A is a high efficiency, high power density hybrid converter. It can deliver 12V/20A with an input voltage from 36V to 72V. This demo board features the LTC®7821, which uses an architecture that merges soft-switching switched-capacitor topology with a traditional step-down converter to provide superior ...

Demo Board 

 

36V, Dual Channel, 1.6A Synchronous, Buck LED Driver with I2C Dimming Control

Nov 28th 2017
NORWOOD, MA – November 28, 2017 – Analog Devices announces the Power by Linear™ LT3964, a dual channel, 36V, high efficiency, synchronous, step-down LED driver with internal 40V, 1.6A power switches and an I²C interface that simplifies LED dimming control. The LT3964 operates with a wide 4V to 36V input ...

Press Release 

 

DC2569A - LTM4661EY Demo Board | 1.8V-5.5V Input, Synchronous Step-Up μModule Regulator

Nov 22nd 2017
Demonstration circuit 2569A is ultrathin step-up μModule regulator featuring the LTM4661. The DC2569A operates over 1.8V to 5.5V input and it generates 12V, 1A output from 5V input. Also, the LTM4661 has precision voltage reference, which can generate output voltage with 3% tolerance over the full operating conditions. The ...

Demo Board 

 

DC2478A - LT8315 Demo Board | 19V to 400VIN Nonisolated Buck, VOUT = 12V @ Up to 120mA

Nov 20th 2017
Demonstration circuit 2478A is a nonisolated buck converter featuring the LT®8315. The demo board outputs 12V, and maintains tight regulation with a load current from 4mA to 120mA. It is optimized to operate over a wide 19V to 400V DC input voltage range. Output voltage accuracy stays within ±1% over the entire input ...

Demo Board 

 

DC2494A - LTM8063 Demo Board | 40V, 2A Step-Down μModule Regulator

Nov 16th 2017
Demonstration circuit 2494A is a 40V, 2A step-down μModule® regulator featuring the LTM®8063. The demo board is designed for 5V output from a 6.5V to 40V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The user adjustable features of the LTM8063 ...

Demo Board LTpowerCAD 

 

DC2407A - LT8650S Demo Board | Dual Channel 42V, 4A Synchronous Step-Down Silent Switcher 2

Nov 15th 2017
Demonstration circuit 2407A is a dual channel 42V, 4A synchronous step-down Silent Switcher® with 6.2μA quiescent current featuring the LT8650S. The LT8650S is the second-generation Silent Switcher that minimizes EMI and reduces PCB layout sensitivity. The demonstration circuit has two outputs: 5V and 3.3V. Each output ...

Demo Board LTpowerCAD LTspice 

 

Dual Channel 42V, 4A Monolithic Synchronous Step-Down Silent Switcher 2 with 6.2μA Quiescent Current

Walker Bai - Applications Enginneer Nov 14th 2017
Design Note DN1044: Introduction The LT®8650S 42V, dual channel, 4A, synchronous Silent Switcher®2 regulator features a wide input voltage range of 3V to 42V, ideal for automotive, industrial and other stepdown applications. Its quiescent current is only 6.2μA, with the outputs in regulation, a critical feature in ...

Blog Post LTspice 

 

DC1341B - LT3757EDD SEPIC Demo Board | 4.5V ≤ Vin ≤ 36V; Vout = 5V @ 3A

Nov 3rd 2017
Demonstration circuit 1341B features LT®3757A in a 300kHz SEPIC converter circuit, designed for a 5V at 3A output from a 4.5V to 36V input voltage range.   ...

Demo Board 

 

DC2737A - LT8301ES5 Demo Board | No-Opto Isolated Flyback Converter, VIN = 10V to 32V, VOUT = 5V @ up to 700mA

Oct 31st 2017
Demonstration circuit 2737A is an isolated flyback converter featuring the LT®8301. The demo circuit outputs 5V from input 10V to 32V, with a nominal 24V. The output current capability increases with the input voltage. The standby input current of the demo circuit is less than 950μA (typical) at VIN = 24V.   ...

Demo Board 

 

DC2286A - LT3932 Demo Board | VIN = 8V to 36V driving two series LEDs (1ALED/6.6VLED) at 2MHz

Oct 27th 2017
Demonstration circuit DC2286A is a 36V, 2A synchronous 2MHz buck LED driver featuring the LT3932. It drives one or two series LEDs at 1A when VIN is between 8V and 36V. It can run down to 4VIN with a single LED (if UVLO is adjusted). DC2286A runs at 2MHz switching frequency. Spread spectrum frequency modulation (SSFM) can be ...

Demo Board 

 

Cool Running, 144W, 4 × 40A μModule POL Regulator

Afshin Odabaee - Business Manager - uModule Power Products
Yan Liang - Applications Engineer
Oct 24th 2017
Design Note DN569: Introduction The LTM®4636 is a 40A-capable μModule® regulator featuring 3D packaging technology, or component-on-package (CoP) to keep it cool—see Figure 1. The body of the device is an overmolded 16mm × 16mm × 1.91mm BGA package with an inductor stacked on top to expose it to ...

Blog Post 

 

DC1890A - LTC3883EUH Demo Board | Programming Clamshell Socketed Demo Board

Oct 23rd 2017
Demonstration circuit 1890A contains the circuitry needed to program and verify the EEPROM of the LTC®3883 and LTC3883-1. That is its only purpose. The DC1890A is shipped with a LTC3883 installed in the clamshell style programming socket. The EEPROM contains the factory default configuration. The LTpowerPlay™ .proj ...

Demo Board 

 

DC2251 - LTM8065 Demo Board | 40VIN, 2.5A Silent Switcher μModule Regulator

Oct 23rd 2017
Demonstration circuit 2251A is a 40V, 3.5A peak, 2.5A continuous step-down μModule® regulator featuring the LTM®8065. The demo board is designed for 5V output from a 6V to 40V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The user adjustable features ...

Demo Board 

 

Silent Switcher 2: Dual 4A per Channel, 42V Micropower Step-Down Regulator

John Gardner - Design Engineer Oct 16th 2017
As automotive electronic content increases, voltage regulators continually need smaller size, higher current, and lower radiated emissions.  Silent Switcher® 2 products address this need by providing 2MHz solutions with high efficiency without compromising EMI performance. The LT8650S is a dual channel, 42V step-down ...

Video 

 

42V, Dual 4A (IOUT), Synchronous Step-Down Silent Switcher 2 Delivers 94% Efficiency at 2MHz & Ultralow EMI Emissions

Oct 16th 2017
MILPITAS, CA and NORWOOD, MA – October 16, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LT8650S, a dual 4A, 42V input synchronous step-down switching regulator. It’s unique Silent Switcher®2 architecture uses four internal input capacitors as well as ...

Press Release 

 

40VIN, 2A Silent Switcher μModule Regulator in 6.25mm x 4mm BGA Package

Oct 12th 2017
MILPITAS, CA and NORWOOD, MA – October 12, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTM8063, a 40VIN, 2A µModule® step-down regulator in a tiny 6.25mm x 4mm BGA package. The package size is 75% smaller than the existing equivalent product. With two ...

Press Release 

 

25A μModule Regulator Supports N+1 Redundancy Ensuring Power Availability under Fault Conditions

Oct 9th 2017
MILPITAS, CA and NORWOOD, MA – October 9, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTM4645, a 25A step-down µModule® (power module) regulator with the ability to current share multiple independent devices (N) where at least one LTM4645 is used as ...

Press Release 

 

Silent Switcher, 42VIN, 2.5A μModule Regulator in 6.25mm x 6.25mm BGA Package

Oct 2nd 2017
MILPITAS, CA and NORWOOD, MA – October 2, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTM8065, a µModule® (power module) step-down regulator with up to 40V input voltage (42V abs max), which can safely operate from unregulated or fluctuating 12V to 36V ...

Press Release 

 

DC2234A - LT8711 Micropower Synchronous Sepic Converter

Oct 2nd 2017
Demonstration circuit 2234A is a synchronous sepic converter featuring the LT®8711 multitopology switching controller. The LT8711 is a current mode PWM DC/DC controller with a dual input LDO to optimize gate driver efficiency. Ultralow 15μA quiescent current in low noise Burst Mode® operation achieves high efficiency ...

Demo Board 

 

Terasic DE10-Nano Kit

Sep 26th 2017
The Terasic DE10-Nano is a development kit based on an Intel Cyclone V SoC which combines the power of a Cyclone V FPGA with a dual-core ARM Cortex-A9 processor. Analog Devices offers many plug-in boards that let you extend the functionality of the kit. Whether you want to measure real-world phenomena such as toxic gases or ...

Circuit LTpowerPlanner 

 

42V Multitopology DC/DC Controller with 15μA IQ Provides Five Converter Topologies at Up to 10A Output Current

Sep 11th 2017
MILPITAS, CA and NORWOOD, MA – September 11, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LT8711, a multitopology current mode PWM controller that can easily be configured as a synchronous buck, boost, SEPIC and ZETA DC/DC converter, or as a nonsynchronous buck-boost ...

Press Release 

 

DC2456A - LTC3779EFE Demo Board | 16V ≤ VIN ≤ 120V, VOUT = 48V @ 10A at up to 99% Efficiency

Sep 10th 2017
Demonstration circuit 2456A is a high voltage, high efficiency synchronous buck-boost DC/DC converter with a 16V to 120V input voltage range. It can supply a 10A maximum load current with a 48V output. The demo board features the LTC®3779EFE controller. The constant frequency current mode architecture allows a phase-lockable ...

Demo Board 

 

58VIN, 24W, Inverting μModule Regulator Is EN55022 Class B Compliant

Sep 6th 2017
MILPITAS, CA and NORWOOD, MA – September 6, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTM4651, a nonisolated inverting output µModule® regulator that can generate –26.5V to –0.5V output from a positive input supply voltage. The LTM4651 ...

Press Release 

 

DC2575A - LT8391AIFE Demo Board | 60V, 2MHz Synchronous Buck-Boost LED Driver Controller

Sep 5th 2017
Demonstration circuit DC2575A is a 60V 2MHz synchronous buck-boost LED driver featuring the LT8391A. It accepts an input voltage from 4V to 60V and drives a single string of LEDs up to 16V at 1.5A. DC2575A runs at 2MHz switching frequency without spread spectrum, but spread spectrum frequency modulation (SSFM) can be enabled ...

Demo Board 

 

150V Synchronous Buck-Boost Controller Eliminates Surge Protection Devices & Delivers Up to 99% Efficiency

Sep 5th 2017
MILPITAS, CA and NORWOOD, MA – September 5, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTC3779, a high efficiency (up to 99%) 4-switch single inductor synchronous buck-boost DC/DC controller that operates from input voltages above, below or equal to the regulated ...

Press Release 

 

DC2369A - DC2369A Low Power Wireless Current Sense

Aug 30th 2017
The DC2369A demo circuit is a reference design that implements a wireless current sense solution using Analog Device's low power integrated circuits. The only external connection needed is the current to be measured, allowing this circuit to be inserted at any voltage level or isolation level. The design combines components ...

Demo Board 

 

DC1830B-D - LTC4000-1 Battery Charger Controller and PowerPath Manager with Maximum Power Point Control

Aug 29th 2017
Demonstration circuit 1830B is a battery charger controller and PowerPath™ manager with maximum power point control (MPPC) featuring the LTC®4000-1. MPPC extracts near maximum power from high impedance sources such as solar panels, wind turbines or fuel cells. MPPC is achieved by means of an input voltage regulation ...

Demo Board 

 

60V 2MHz Buck-Boost Controllers Regulate High Power Voltage and Current with High Efficiency and Low EMI

Keith Szolusha - Applications Engineering Section Leader Aug 24th 2017
Design Note DN567: Introduction Synchronous buck-boost controllers are versatile and highly efficient. They can produce high power as both a boost and a buck with a single inductor, keeping power supply design simple. Normally, a buck-boost controller in a high power application is operated at a standard or low switching frequency, ...

Blog Post 

 

DC2424A - LT3964 Demo Board | VIN = 5V to 36V driving two separate LED strings (1ALED/~3.6VLED) at 2MHz

Aug 22nd 2017
The DC2424A is a 36V synchronous dual LED driver with I 2C featuring the LT®3964. It drives two separate LEDs (or channels of LEDs) at 1A when VIN is between 5V and 36V. DC2424A runs at 2MHz switching frequency. Its two channels can drive separate LED strings which can have different currents, voltages, or dimming ratios. ...

Demo Board 

 

DC2658A - LT8643S Demo Board | VIN = 5.8V to 42V with VOUT = 5V at 6A @ 2MHz

Aug 22nd 2017
Demonstration circuit 2658A is a 42V, 6A synchronous step-down second generation SILENT SWITCHER with spread spectrum frequency modulation featuring the LT®8643S. The demo board is designed for 5V output from a 5.8V to 42V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial ...

Demo Board LTpowerCAD 

 

DC2558A - LTC4091 Demo Board | 36V Battery Charger and Power Backup Manager

Aug 21st 2017
Demonstration circuit 2558A is a high voltage switching buck regulator, Li-Ion cell charger and power backup manager. It is based on the LTC4091 and provides the following functions: 2A buck regulator with 7.5V-36V (60V absolute max) input range and with output voltage tracking cell voltage, full-featured cell charger with selectable ...

Demo Board 

 

2A, 2MHz, 60V Boost/SEPIC/Inverter DC/DC Converter with IQ = 9μA

Aug 21st 2017
MILPITAS, CA and NORWOOD, MA – August 21, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LT8362, a current mode, 2MHz step-up DC/DC converter with an internal 2A, 60V switch. It operates from an input voltage range of 2.8V to 60V, suitable for applications with input ...

Press Release 

 

DC1669B - LTM4627EV 15A Step‐Down μModule Regulator

Aug 18th 2017
Demonstration circuit 1669 features the LTM®4627EV μModule regulator, a high‐performance high efficiency step‐down regulator. The LTM4627EV has an operating input voltage range of 4.5V to 20V and is able to provide an output current of up to 15A. The output voltage is programmable from 0.6V to 5V and can be remotely ...

Demo Board 

 

105V, 2.3A Low-EMI Synchronous Step-Down Regulator

Charles Hawkes - Design Aug 16th 2017
Today, many electronic systems require power processing at higher voltages, while simultaneously demanding increased efficiency and low EMI/EMC emissions. The LTC7103 meets all of these challenges, with an unprecedented combination versatility and simplicity. The LTC7103 is a 105V, 2.3A, synchronous step-down regulator that ...

Video 

 

DC2328A - LTM4651 Demo Board | EN55022B Compliant 58V, 24W Inverting-Output DC/DC μModule Regulator

Aug 11th 2017
Demonstration circuit 2328A is an inverting buck-boost converter with 12V to 34V input voltage, –24V output voltage and max 2A output current capability, which features the LTM®4651Y. The LTM4651 is an ultralow noise, 58V, 24W inverting-topology DC/DC µModule regulator. It is designed to meet the radiated emissions ...

Demo Board LTpowerCAD 

 

DC2628A - LT8362 Demo Board | VIN = 10V to 36V with VOUT= 48V at 280mA to 1000mA

Aug 8th 2017
Demo circuit 2628A features the LT®8362 in boost configuration. The converter is designed to convert a 10V to 36V source to 48V at 280mA to 1000mA, depending on input voltage, and with a switching frequency of 2MHz. Please refer to Figure 4 for load current versus input voltage.    ...

Demo Board LTspice 

 

Simple Power Backup Supply for a 3.3V Rail

Victor Khasiev - Applications Engineer Aug 8th 2017
Design Note DN565: Introduction Data loss is a concern in telecom, industrial and automotive applications where embedded systems require a dependable supply of power. Sudden power interruptions can corrupt data during read and write operations performed by hard drives and flash memory. Designers often use batteries, capacitors ...

Blog Post 

 

DC2285A - LT8705AEUHF Demo Board | VIN = 36V to 75V, VOUT = 48V @18A

Aug 4th 2017
Demonstration circuit 2285A features two high power high performance buck-boost LT®8705A converters operating in master-slave configuration. The circuit can operate with input voltages above, below or equal to the output voltage. The demo board input range is 36V to 75V. The output is optimized for 48V at 18A, with the output ...

Demo Board 

 

DC2466A - LTC3246 Demo Board | Wide VIN Range Buck-Boost Charge Pump with Watchdog Timer

Aug 4th 2017
Demonstration circuit 2466A is a buck-boost 500mA charge pump with pin selectable output voltages and includes a watchdog timer featuring the LTC®3246EMSE. The LTC3246 operates with a wide input voltage range from 2.7V to 38V and is engineered for diagnostic coverage for ISO 262262 compliant systems. The wide VIN operating ...

Demo Board 

 

DC2411A - LTC7150SEY Demo Board | High Efficiency 20A Synchronous Buck Regulator

Aug 1st 2017
Demonstration circuit 2411A is a high efficiency synchronous buck regulator with a 3.1V to 20V input range. It can supply 20A maximum load current at 1.2V output. The demo board features the LTC®7150S regulator. No external MOSFETs nor external current sense resistor are required. It uses a phase-lockable controlled on-time ...

Demo Board 

 

DC1784B - LT3797EUKG Demo Board: 2.5V to 40V input to 1A output at up to 50V

Jul 24th 2017
DC1784B is a triple boost LED driver featuring the LT3797 triple boost LED controller. It accepts an input voltage from 2.5V to 40V (with higher transient) and drives three independent strings of up to 50V LEDs at 1A. DC1784B features independent PWM and analog dimming of each of the three LED strings. Each of the three channels ...

Demo Board 

 

LTC7820 High Efficiency 24V to –24V, 10A Voltage Inverter with Hot Swap at Input

Jul 24th 2017
The LTC®7820 is a fixed ratio high voltage high power switched capacitor/charge pump controller. The device includes four N-channel MOSFET gate drivers to drive external power MOSFETs in voltage divider, doubler or inverter configurations. The device achieves a 2:1 stepdown ratio from an input voltage as high as 72V, a 1:2 ...

Circuit 

 

LTC7820 High Efficiency 48V to 12V, 20A Voltage Divider

Jul 24th 2017
The LTC®7820 is a fixed ratio high voltage high power switched capacitor/charge pump controller. The device includes four N-channel MOSFET gate drivers to drive external power MOSFETs in voltage divider, doubler or inverter configurations. The device achieves a 2:1 stepdown ratio from an input voltage as high as 72V, a 1:2 ...

Circuit 

 

LTC7820 High Efficiency 24V to 12V, 15A Voltage Divider with Disconnect FET at Output

Jul 24th 2017
The LTC®7820 is a fixed ratio high voltage high power switched capacitor/charge pump controller. The device includes four N-channel MOSFET gate drivers to drive external power MOSFETs in voltage divider, doubler or inverter configurations. The device achieves a 2:1 stepdown ratio from an input voltage as high as 72V, a 1:2 ...

Circuit 

 

20V, 20A Monolithic Synchronous Silent Switcher®2 Buck Regulator Reduces EMI & Enables High Power Density Applications

Jul 24th 2017
MILPITAS, CA and NORWOOD, MA – July 24, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTC7150S, a 20V, 20A monolithic synchronous buck converter with differential VOUT remote sensing. The device’s unique phase lockable controlled on-time constant frequency ...

Press Release 

 

DC2598A - LT8390A Demo Board | VIN = 4V to 24V, (60V transient) with VOUT = 12V at 4A @ 2MHz

Jul 20th 2017
Demonstration circuit 2598A is a 60V 2MHz synchronous buck-boost controller featuring the LT®8390A. It accepts an input voltage from 4V to 24V (with transient to 60V) and regulates 12V output at up to 4A. DC2598A features high efficiency and 2MHz switching frequency, a high speed for a 4-switch buck-boost controller. It ...

Demo Board 

 

Highly Integrated 36V Buck Battery Charger Provides Seamless Backup Power

Jul 18th 2017
MILPITAS, CA and NORWOOD, MA – July 18, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, introduces the LTC4091, a complete lithium-ion battery backup management system for 3.45V to 4.45V supply rails that must be kept active during a long duration main power failure. The LTC4091 ...

Press Release 

 

105V, 2.3A Synchronous Step-Down Regulator Delivers 96% Efficiency with Ultralow EMI/EMC Emissions

Jul 17th 2017
MILPITAS, CA and NORWOOD, MA – July 17, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LTC7103, a 2.3A, 105V input capable synchronous step-down switching regulator. Its wide 4.4V to 105V input voltage range is designed for operation from a continuously high voltage ...

Press Release 

 

DC2317A - LTC7103 Demo Board | VIN = 5V to 100V with VOUT = 5V at 2.3A @400kHz

Jul 13th 2017
Demonstration circuit 2317A is a 100V monolithic DC/ DC step-down regulator featuring the LTC®7103. The demo board is designed for a 5V/2.3A output from a 5V to 100V input at 400kHz switching frequency. The wide input range makes it suitable for automotive, industrial, medical instrument, and telecom applications. This buck ...

Demo Board LTspice 

 

DC2335A - LTC3636EUFD Demo Board | 3.1V to 20V Input with Vout1 range of 3.1V to 20V up to 6A & Vout2 range of 5V to 20V up to 6A

Jul 13th 2017
Demonstration circuit DC2335A is a dual output regulator consisting of two constant-frequency step-down converters, based on the LTC®3636 monolithic dual channel synchronous buck regulator. The DC2335A has an input voltage range of 3.1V to 20V, with each regulator capable of delivering up to 6A of output current. The DC2335A ...

Demo Board 

 

DC2329A - LTC7124 Demo Board | 17VIN, Dual 3.5A Synchronous Step-Down Regulator with Ultra-Low Quiescent Current

Jul 12th 2017
Demonstration circuit DC2329A features the LTC®7124IUDD: a wide input and output voltage range, high efficiency and power density, dual 3.5A DC/DC stepdown monolithic regulator. The input voltage range of the DC2329A is 3.1V to 17V. The default setting of VOUT1 is user selectable from 1.2V, 1.5V and 1.8V at 3.5A max. The ...

Demo Board LTpowerCAD 

 

36V, 2A Monolithic Synchronous Step-Down LED Driver with Silent Switcher Topology Minimizes EMI Concerns

Jul 11th 2017
MILPITAS, CA and NORWOOD, MA – July 11, 2017 – Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LT3932, a monolithic, synchronous, step-down DC/DC converter with internal 36V, 2A power switches and an internal PWM generator. Its fixed frequency, peak current mode control ...

Press Release 

 

High Efficiency Solar MPPT Battery Charger Using LT8611 and AD5245

Perry Faubert - FAE Jul 10th 2017
Introduction Outdoor applications that use solar panels in the range of a few watts often use a microcontroller-based MPPT (Maximum Power Point Tracking)  function to extract the maximum power available over the full range of environmental operating conditions. Many microcontroller-based MPPT solutions designed for ...

Blog Post LTspice 

 

Too many results please adjust your filters