Solutions Search - Micropower Boost

LTC3897 High Efficiency 2-Phase 24V Boost Converter with In-Rush Current Control, Overcurrent Protection, Input Voltage Surge Protection and Reverse Input Protection

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

 

LTC3897 High Efficiency 2-Phase 48V Boost Converter with Reverse Input Protection (Surge Stopper Controller Not Used)

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

 

LTC3897 High Efficiency 2-Phase 48V Boost Converter with Overcurrent Protection (Ideal Diode and Surge Stopper Controllers at the Output)

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

 

LTC3897 Nonsynchronous 107V/1.5A 2-Phase Boost Converter with In-Rush Current Control, Overcurrent Protection, Input Voltage Surge Protection and Reverse Input Protection

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

 

Multiphase 60V Synchronous Boost Controller Provides up to 97% Efficiency with Input & Output Protection

Jan 10th 2017
MILPITAS, CA – January 10, 2017 – Linear Technology Corporation announces the LTC3897, a multiphase synchronous boost DC/DC controller with input surge stopper and ideal diode controller. The boost controller drives two N-channel power MOSFET stages out-of-phase to reduce input and output capacitor requirements, ...

 

DC2108A - LTC3897 Demo Board | Sync Boost Controller, 16V ≤ VIN ≤ 55V,Vout = 48V @ 4A to 12A

Nov 30th 2016
Demonstration circuit DC2108 is DC/DC boost converter featuring the LTC®3897 constant frequency current mode boost controller. The DC2108A operates over a 16V to 55V input and provides 4A to 12A of output current as shown in Figure 3. The 160kHz (2 •160kHz at the output) constant frequency operation results in a small ...

 

38V Input Synchronous Boost Controller Operates at 150°C with up to 98% Efficiency

Nov 7th 2016
MILPITAS, CA – November 7, 2016 – Linear Technology Corporation announces the H-grade versions of the LTC3786, a synchronous step-up DC/DC controller with guaranteed operation for junction temperatures up to 150°C. The LTC3786 replaces the boost diode with an N-channel MOSFET for higher efficiency and reduced ...

 

How NOT to Damage Your Switching Regulator Demo Board

Christopher Jarboe - Associate Applications Engineer Sep 2nd 2016
Introduction: A great way to develop a design is to start with an existing demo board and modify it. While this simplifies the process, there are a few pitfalls to be aware of so that you do not have to spend time tracking down and replacing damaged components. Below are four common ways to damage your circuit. 1) Improper ...

 

DC2449A-B - LT8335 Demo Board | Micropower Inverter, 4.5V ≤ VIN ≤ 13V, Vout = -12V @ 350mA, 2MHz fSWITCH

Aug 25th 2016
Demonstration circuits 2449A-A and 2449A-B feature the LT8335, in boost and inverting configurations. The demo circuits demonstrate small size and low component count. The boost is designed to convert a 3V to 10V input source to 12V at 275mA. The inverter converts a 4.5V to 13V source to –12V at 350mA. Refer to Figures ...

 

DC2449A-A - LT8335 Demo Board | Micropower Boost, 3V ≤ VIN ≤ 10V, Vout = 12V @ 275mA, 2MHz fSWITCH

Aug 25th 2016
Demonstration circuits 2449A-A and 2449A-B feature the LT8335, in boost and inverting configurations. The demo circuits demonstrate small size and low component count. The boost is designed to convert a 3V to 10V input source to 12V at 275mA. The inverter converts a 4.5V to 13V input source to –12V at 350mA. Refer to Figures ...

 

LTC3130 Single-Cell 1.2V, 200mA Buck-Boost Converter

Aug 15th 2016
The LTC3130/LTC3130-1 are high efficiency, low noise, 600mA buck-boost converters with wide VIN and VOUT ranges. For high efficiency operation at light loads, BurstMode operation can be selected, reducing the quiescent current to just 1.6µA. Converter start-up is achieved from sources as low as 7.5µW. ...

 

2A, 2MHz, 28V Boost/SEPIC/Inverting DC/DC Converter with IQ = 6μA

Jul 7th 2016
MILPITAS, CA – July 7, 2016 – Linear Technology Corporation announces the LT8335, a current mode, 2MHz step-up DC/DC converter with an internal 2A, 28V switch. It operates from an input voltage range of 3V to 25V, suitable for applications with input sources ranging from a single-cell Li-Ion to automotive inputs. ...

 

LT8335 3V to 6V Input, 24V Boost Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8335 3V to 6V Input, 12V Boost Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8335 8V to 16V Input, 24V Boost Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8335 4V to 16V Input, –5V Inverting Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8335 4V to 16V Input, 5V SEPIC Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8335 5V to 12V Input, –12V Inverting Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8335 4V to 16V Input, ±5V Converter

Jun 27th 2016
The LT®8335 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

Differences Between the Ćuk Converter and the Inverting Charge Pump Converter

Kevin B. Scott - Senior Strategic Marketing Engineer
Jesus Rosales - Applications Engineer Mar 7th 2016
The Ćuk converter (also referred to as the two inductor inverting converter), the inverting charge pump and the single inductor inverting converter (also referred to as the inverting buck-boost) all provide a negative output voltage from a positive input voltage. However, engineers often unknowingly refer to these topologies ...

 

LT3463 Dual Output ±20V Converter

Feb 1st 2016
The LT3463/LT3463A are dual micropower DC/DC converters with internal Schottky diodes in a 10-lead 3mm x 3mm DFN package. Negative and positive LT3463 converters have a 250mA current limit. The LT3463A positive converter also has a 250mA limit, while the negative converter has a 400mA limit. Both devices have an input voltage ...

 

Simplify Your High Voltage DC/DC Converters to Save Battery Life

Jesus Rosales - Applications Engineer Jan 21st 2016
Linear Technology’s LT8330 and LT8331, two Low Quiescent current Boost/SEPIC/Inverting Converters, are specifically designed for Automotive, Industrial, Telecom and Portable applications. The LT8330 has a 1A, 60V power switch and an input range of 3-40V, while the LT8331 has a 500mA, 140V power switch and an input range ...

 

DC2275A - LT8331 Demo Board | Boost, 10V ≤ VIN ≤ 48V, 120Vout @ up to 80mA

Dec 11th 2015
Demonstration circuit DC2275A features the LT®8331 in a boost configuration. The demo circuit demonstrates small size and low component count. The boost is designed to convert a 10V to 48V source to 120V at 25mA to 80mA. ...

 

LT8331 36V to 72V Input,120V Boost Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 9V to 16V Input, 135V Boost Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 10V to 48V Input, 240V Boost Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 36V to 72V Input, 48V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 4.5V to 80V Input, 12V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 4.5V to 80V Input, 5V SEPIC Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 36V to 72V Input, –24V Inverting Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 4.5V to 80V Input, –12V Inverting Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 4.5V to 80V Input, –5V Inverting Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

LT8331 40V to 80V Input, 5V Isolated Output Converter

Nov 4th 2015
The LT®8331 is a current mode DC/DC converter with a 140V, 0.5A switch operating from a 4.5V to 100V input. With a unique single feedback pin architecture, it is capable of boost, SEPIC, flyback or inverting configurations. Burst Mode operation consumes as low as 6μA quiescent current to maintain high efficiency at ...

 

Monolithic Converter Delivers High Output Voltages

Jesus Rosales - Applications Engineer Nov 4th 2015
Design Note 545: Introduction Industrial, telecom, medical and automotive applications use a wide variety of regulated voltages to operate effectively, including high voltage and negative rails. When the designer is faced with producing industrial power supplies, the job can be simplified by minimizing the parts count, as well ...

 

500mA, 140V Boost/SEPIC/Flyback/Inverting DC/DC Converter with IQ= 6μA

Nov 2nd 2015
MILPITAS, CA - November 2, 2015 - Linear Technology Corporation announces the LT8331, a current mode step-up DC/DC converter with an internal 500mA, 140V switch. It operates from an input voltage range of 4.5V to 100V, making it suitable for use with a wide range of input sources found in industrial, transportation and avionic ...

 

DC2372A - LTC3121EDE Demo Board | Sync Boost, 1.8V ≤ VIN ≤ 5.5V, Vout = 12V @ Up to 400mA

Sep 30th 2015
Demonstration circuit 2372A is a 5.5V input, 12V output at 400mA DC/DC power supply featuring the LTC®3121. The IC includes internal high and low side 1.5A switches and features selectable PWM or Burst Mode® operation for high efficiency at low output current. The board operates from an input voltage as low as 1.8V and ...

 

1A, 2MHz, 60V Boost/SEPIC/Inverting DC/DC Converter with IQ= 6μA

Sep 14th 2015
MILPITAS, CA - September 14, 2015 - Linear Technology Corporation announces the LT8330, a current mode, 2MHz step-up DC/DC converter with an internal 1A, 60V switch. It operates from an input voltage range of 3V to 40V, making it suitable for applications with input sources ranging from a single-cell Li-Ion to automotive inputs. ...

 

DC2018A - LT8330 Demo Board | Dual circuits. 1) 10V to 36V input to 48V at 135mA & 2) 4V to 36V input to -12V at 270mA

Sep 4th 2015
Demonstration circuit 2018A features the LT®8330, a low IQ boost/SEPIC/inverting converter with a 1A, 60V switch. The LT8330 allows higher input and output voltages than comparable converters and also significantly reduces input current at light loads and no load. The LT8330 regulates either positive or negative outputs ...

 

LTC3121 2 AA Cell to 12V Synchronous Boost Converter, 100mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down ...

 

LTC3121 3.3V to 12V, 2MHz Synchronous Boost Converter with Output Disconnect, 250mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down ...

 

LTC3121 USB/Battery Powered Synchronous Boost Converter, 4.3V to 5V, 500mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down ...

 

LTC3121 5V to Dual Output Synchronous Boost Converter, ±15V @ 140mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down ...

 

LTC3121 Single Li-Cell 3-LED Driver, 2.5V/4.2V to 175mA

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down ...

 

LTC3121 Dual Supercapacitor Backup Power Supply, 0.5V to 5V

Aug 27th 2015
The LTC®3121 is a synchronous step-up DC/DC converter with true output disconnect and inrush current limiting. The 1.5A current limit along with the ability to program output voltages up to 15V makes the LTC3121 well suited for a variety of demanding applications. Once started, operation will continue with inputs down ...

 

1.5A, 15V Synchronous Boost Regulator Offers 95% Efficiency, 3MHz Switching & Output Disconnect in a 3mm x 4mm DFN

Aug 20th 2015
MILPITAS, CA - August 20, 2015 - Linear Technology Corporation announces the LTC3121, a 3MHz current mode, synchronous boost DC/DC converter with integrated output disconnect. Its internal 1.5A switches deliver output voltages as high as 15V from an input voltage range of 1.8V at start-up (0.5V when running) to 5.5V, making ...

 

LT8494 1.5MHz, 12V Output @ 0.5A SEPIC Converter

Aug 18th 2015
The LT®8494 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator. Quiescent current can be less than 7μA when operating and is ~0.3μA when SWEN is low. The LT8494 can be configured as either a SEPIC, boost or flyback converter. ...

 

LT8494 450kHz, Wide Input Range 12V Output @ 0.65A SEPIC Converter

Aug 18th 2015
The LT®8494 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator. Quiescent current can be less than 7μA when operating and is ~0.3μA when SWEN is low. The LT8494 can be configured as either a SEPIC, boost or flyback converter. ...

 

DC2242A - LT8494EFE Demo Board | SEPIC, 3V ≤ VIN ≤ 60V; VOUT = 5V @ 1A

Jul 27th 2015
Demonstration circuit 2242A is a monolithic SEPIC converter featuring LT®8494. The demo board is designed for 5V output from a 3V to 60V input at 450kHz switching frequency. The max output current is 1A when the input voltage is above 12V, and is reduced with lower input voltage. The quiescent current of LT8494 is less than ...

 

2A, 70V SEPIC/Boost DC/DC Converter with 7μA Quiescent Current

Jul 16th 2015
MILPITAS, CA - July 16, 2015 - Linear Technology Corporation announces the LT8494, a current mode, fixed frequency SEPIC/boost DC/DC converter with an internal 2A, 70V switch. Ultralow quiescent current of only 7µA makes the device ideal for always-on automotive or other industrial battery powered systems. The LT8494 starts ...

 

LT8330 3V to 6V Input, 48V Boost Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 8V to 16V Input, 24V Boost Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 8V to 30V Input, 24V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 3V to 6V Input, 24V Boost Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 4V to 16V Input, 5V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 4V to 36V Input, 12V SEPIC Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 8V to 30V Input, –24V Inverting (Cuk) Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 4V to 36V Input, –12V Inverting (Cuk) Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 4V to 16V Input, –5V Inverting Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

LT8330 8V to 40V Input, ±15V Converter

Jul 8th 2015
The LT®8330 is a current mode DC/DC converter capable of generating either positive or negative output voltages using a single feedback pin. It can be configured as a boost, SEPIC or inverting converter consuming as low as 6μA of quiescent current. Low ripple Burst Mode operation maintains high efficiency down to very ...

 

Ultralow Noise and Ultrahigh PSRR

Amit Patel Jun 17th 2015
When it comes to powering noise-sensitive analog/RF applications, low dropout (LDO) linear regulators are generally preferred over their switching counterparts. Low noise LDOs power a wide range of analog/RF designs, including frequency synthesizers (PLLs/VCOs), RF mixers and modulators, high speed and high resolution data ...

 

DC2205A - LT8495 Demo Board | SEPIC, 3V ≤ VIN ≤ 60V, Vout = 5V @ 1A

Jun 8th 2015
Demonstration circuit 2205A is a monolithic SEPIC converter featuring LT®8495. The demo board is designed for 5V output from a 3V to 60V input at 450kHz switching frequency. The max output current is 1A when the input voltage is above 12V, and is reduced with lower input voltage. The LT8495 is a monolithic switching regulator ...

 

Automotive 2A, 70V SEPIC/Boost Converter with 9μA Quiescent Current Includes Power-On Reset & Watchdog Timer

May 19th 2015
MILPITAS, CA - May 19, 2015 - Linear Technology Corporation announces the LT8495, a current mode, fixed frequency SEPIC/boost DC/DC converter with an internal 2A, 70V switch. Ultralow quiescent current of only 9µA makes it ideal for always on automotive systems, and its integrated power-on reset (POR) and watchdog timer offer ...

 

LT8495 450kHz, 5V Output SEPIC Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

 

LT8495 750kHz, 16V to 32V Input, 48V Output, 0.5A Boost Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

 

LT8495 Li-Ion to 12V, Low Q Current Boost @ 650kHz

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

 

LT8495 Low Q Current, 5V to 300V, 250kHz Flyback Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

 

LT8495 450kHz, Wide Input Range 12V Output SEPIC Converter

Apr 7th 2015
The LT®8495 is an adjustable frequency (250kHz to 1.5MHz) monolithic switching regulator with a power-on reset and watchdog timer. Quiescent current can be less than 9μA when operating and is ~0.3μA when SWEN, WDE and RSTIN are low. Configurable as a SEPIC, boost or flyback converter, the low ripple Burst Mode operation ...

 

Frequently Asked Questions: Thermoelectric Energy Harvesting With the LTC3108 & LTC3109

Dave Salerno - Design Section Leader Oct 6th 2014
Q. What are the target applications for the LTC3108 and LTC3109? A. As discussed in the datasheet, these parts target applications that require a low average power (in the milliwatt range or less). This could be a micro-controller that is running continuously, or a wireless sensor/transmitter that is operating at a low duty ...

 

LTC4000 6V to 21V at 5A Boost Converter 5-Cell Li-Ion Battery Charger with C/10 Termination and 0.55A Trickle Charge Current

Sep 23rd 2014
The LTC®4000 is a high voltage, high performance controller that converts many externally compensated DC/DC power supplies into full-featured battery chargers. ...

 

LTC3786: High Efficiency Li-Ion Battery-to-USB Boost Converter

Goran Perica - Power Applications Section Leader
Gabino Alonso - Strategic Marketing Engineer Sep 16th 2014
The LTC®3786 is a high performance synchronous boost converter controller that drives all N-channel power MOSFETs. Synchronous rectification increases efficiency, reduces power losses and eases thermal requirements, enabling the LTC3786 to be used in high power boost applications. A 4.5V to 38V input supply range ...

 

LT1615 1-Cell Li-Ion to 3.3V SEPIC Converter

Sep 12th 2014
The LT1615/LT1615-1 are micropower step-up DC/DC converters in a 5-lead low profile (1mm) ThinSOT package. The LT1615 is designed for higher power systems with a 350mA current limit and an input voltage range of 1.2V to 15V, whereas the LT1615-1 is intended for lower power and single-cell applications with a 100mA current ...

 

LT1615 1-Cell Li-Ion to 20V Converter for LCD Bias

Sep 12th 2014
The LT1615/LT1615-1 are micropower step-up DC/DC converters in a 5-lead low profile (1mm) ThinSOT package. The LT1615 is designed for higher power systems with a 350mA current limit and an input voltage range of 1.2V to 15V, whereas the LT1615-1 is intended for lower power and single-cell applications with a 100mA current ...

 

LTC3769 60VIN/60VOUT Low IQ Synchronous Boost Controller - Video Product Brief

Bruce Haug - Product Marketing Engineer Sep 11th 2014
  LTC®3769 is a high performance single output synchronous boost converter controller that drives an all N-channel power MOSFET stage. Synchronous rectification increases efficiency, reduces power losses and eases thermal requirements, simplifying high power boost applications. The 28μA no-load quiescent current ...

 

LT1308A 5V to 12V Boost Converter

Sep 5th 2014
The LT1308A/LT1308B are micropower, fixed frequency step-up DC/DC converters that operate over a 1V to 10V input voltage range. They are improved versions of the LT1308 and are recommended for use in new designs. The LT1308A features automatic shifting to power saving Burst Mode operation at light loads and consumes just 140µA ...

 

LT1111 3V to 5V Step-Up Converter

Sep 5th 2014
The LT1111 is a versatile micropower DC/DC converter. The device requires only three external components to deliver a fixed output of 5V or 12V. Supply voltage ranges from 2V to 12V in step-up mode and to 30V in step-down mode. The LT1111 functions equally well in step-up, step-down, or inverting applications. ...

 

LT1615 1-Cell to 3.3V Boost Converter

Sep 5th 2014
The LT1615/LT1615-1 are micropower step-up DC/DC converters in a 5-lead low profile (1mm) ThinSOT package. The LT1615 is designed for higher power systems with a 350mA current limit and an input voltage range of 1.2V to 15V, whereas the LT1615-1 is intended for lower power and single-cell applications with a 100mA current ...

 

LT3495 OLED Power Supply from One Li-Ion Cell

Aug 7th 2014
The LT®3495/LT3495B/LT3495-1/LT3495B-1 are low noise boost converters with integrated power switch, feedback resistor and output disconnect circuitry. The parts control power delivery by varying both the peak inductor current and switch off-time. This novel* control scheme results in low output voltage ripple as well as ...

 

DC2173A - LTC3769IUFD Demo Board | Sync Boost, 6V ≤ VIN ≤ 48V, Vout = 48V @ 1.5A to 6A

Jul 28th 2014
Demonstration circuit DC2173A is a DC/DC synchronous boost converter featuring the LTC®3769 constant frequency current mode synchronous boost controller. The DC2173A generates a 48V output voltage and provides 1.5A to 6A of output current. ...

 

60V Synchronous Boost Controller

Jul 23rd 2014
MILPITAS, CA - July 23, 2014 - Linear Technology Corporation announces the LTC3769, a synchronous step-up DC/DC controller that replaces the boost diode with a high efficiency N-channel MOSFET, increasing efficiency and maximizing output current capability. This controller produces 24V at up to 5A output from a 12V input with ...

 

LTC3769 High Efficiency 28V Boost Converter

Jul 11th 2014
LTC®3769 is a high performance single output synchronous boost converter controller that drives an all N-channel power MOSFET stage. Synchronous rectification increases efficiency, reduces power losses and eases thermal requirements, simplifying high power boost applications. The 28μA no-load quiescent current extends ...