Solutions Search - Linear Battery Chargers
DC569B - LTC4054ES5-4.2 | Li-Ion Linear Battery Charger, 4.25V ≤ VIN ≤ 10V, 1-Cell @ 450mA/600mA ICHARGE
Jan 26th 2017
Demonstration circuit 569 is a single cell Li-Ion linear charger in a SOT-23. Charge rates as high as 600mA can be achieved due to the LTC®4054’s internal die temperature control loop that prevents excessive PCB heating under worst-case conditions. The user is provided with a control jumper to select between OFF/450mA/600mA ...
DC2344A - Gleanergy Multi-Source Energy Harvesting Demo Board with Battery Chargers and Life-Extenders for Use with DC2321A Dust Demo Board
Jan 4th 2017
Demonstration circuit 2344A development platform is a versatile Energy Harvesting Demo Board that is capable of accepting solar, thermal, and piezoelectric energy sources or any high impedance AC or DC source. The board contains four independent power circuits consisting of the following EH ICs:
LTC3106: “300mA, ...
DC2321A - Dust Energy Harvesting Demo Board with E-Ink Display, designed to connect to the DC2344A or DC2509A
Nov 3rd 2016
Demonstration circuit 2321A is a low power wireless sensor node development platform equipped with an E-ink display for user feedback. The system is capable of monitoring and managing its available energy, logging information from sensors and sharing this data over a wireless network.
The board is designed to connect to the ...
DC2509A - Gleanergy Multi-Source E H Demo Board with Battery Chargers and Life-Extenders for Use with DC2321A Dust Demo Board
Sep 27th 2016
The DC2509A development platform is a versatile energy harvesting demo board that is capable of accepting solar, thermal, and piezoelectric energy sources or any high impedance AC or DC source. The board contains four independent power circuits consisting of the following EH ICs:
LTC®3106 – 300 mA, Low Voltage Buck-Boost ...
DC2302A - LTC4123EDC Demo Board | A Kit to Charge a NiMH Button Cell Battery Up to 25mA at 1.5V from a 5V Wireless Transmitter
Feb 24th 2016
Demonstration Circuit DC2302A is a kit of the DC2300A demonstration board, featuring the LTC®4123EDC, and the DC2301A Single Switch Transmitter demonstration board. The DC2300A can charge a single NiMH battery at up to 25mA, with an air gap of 0.8mm to 4.0mm. The DC2300A detects Zn-Air primary cells and will not charge them.
...
DC2255A - LTC3106EUDC Demo Board | Buck-Boost, 0.35V ≤ VIN ≤ 5.1V; Vout = 1.8/2.2/3.3/5V @ 300mA
Feb 3rd 2016
Demonstration circuit DC2255A features the LTC®3106, an ultralow input voltage buck-boost DC/DC converter with automatic PowerPath™ management optimized for multisource, low power systems. The DC2255A has four user-selectable output voltages: 1.8V, 2.2V, 3.3V and 5V. Output current can be up to 300mA (for ...
Tiny Wireless NiMH Charger-Receiver Optimized for Space-Constrained Hearing Aid Applications
Dec 16th 2015
MILPITAS, CA - December 16, 2015 - Linear Technology Corporation
introduces the LTC4123 to further expand its offerings in wireless
battery charging. The LTC4123 combines a 30mW wireless receiver
with a constant-current/constant-voltage linear charger for NiMH
batteries, such as Varta’s power one ACCU plus series. An external
resonant ...
300mV Start-Up, 1.6μA IQ Synchronous Buck-Boost DC/DC Converter with Integrated PowerPath for Low Power Wireless Sensor Applications
Dec 14th 2015
MILPITAS, CA - December 14, 2015 - Linear Technology announces
the LTC3106, a
highly integrated, 1.6µA quiescent current 300mV start-up
buck-boost DC/DC converter with PowerPath™ management, optimized
for multisource, low power systems. The LTC3106 is ideal for
powering low power wireless sensors from rechargeable or primary
batteries ...
LTC4054-4.2 600mA Single Cell Li-Ion Charger
Jan 28th 2015
The LTC™4054 is a complete constant-current/constantvoltage linear charger for single cell lithium-ion batteries. Its ThinSOT package and low external component count make the LTC4054 ideally suited for portable applications. Furthermore, the LTC4054 is specifically designed to work within USB power specifications.
...
LTC4054L-4.2 90mA Li-Ion Single Coin Cell Charger
Jan 28th 2015
The LTC™4054L is a complete, constant-current/constantvoltage linear charger for single cell lithium-ion batteries. Its small size and ability to regulate low charge currents make the LTC4054L especially well-suited for portable applications using low capacity rechargeable lithium-ion coin cells. Furthermore, the LTC4054L ...
LTC4065L Standalone 100mA Single Cell Li-Ion Battery Charger
Jan 28th 2015
The LTC®4065L is a complete constant-current/constantvoltage linear charger for single-cell lithium-ion batteries. Its small size and ability to accurately regulate low charge currents make the LTC4065L especially well-suited for portable applications using low capacity rechargeable lithium-ion cells. Furthermore, LTC4065L ...
LTC4065-4.4 Standalone 4.4V Single Cell Li-Ion Battery Charger
Jan 28th 2015
The LTC4065-4.4 is a complete constant-current/constant- voltage linear charger for high capacity single-cell lithium-ion batteries with a 4.4V float voltage. Its 2mm × 2mm DFN package and low external component count make the LTC4065-4.4 especially well-suited for portable applications. Furthermore, LTC4065-4.4 is specifically ...
LTC4060 Full Featured 2A NiMH Charger Application
Jan 9th 2015
The LTC4060 is a complete fast charging system for NiMH or NiCd batteries. Just a few external components are needed to design a standalone linear charging system. ...
LTC4060 1A NiMH Charger Application with Power Path Control
Jan 9th 2015
The LTC4060 is a complete fast charging system for NiMH or NiCd batteries. Just a few external components are needed to design a standalone linear charging system.
An external PNP transistor provides charge current that is user programmable with a resistor. A small external capacitor sets the maximum charge time. No external ...
DC2133A - LTC4079 Demo Board | 2.7V-60Vin, 250mA Linear Charger with Low Quiescent Current
Oct 24th 2014
Demonstration circuit 2133A features a simple battery charger circuit using the LTC®4079 high-voltage monolithic linear charger. The DC2133 has an input voltage range from 2.7V to 60V and is capable of supplying up to 250mA charge current. The charge voltage is jumperselectable to 4.2V or 8.4V. Charge current is adjustable ...
2.7V-60V Input, 250mA Linear Battery Charger Features Multi-Chemistry Operation
Oct 13th 2014
MILPITAS, CA - October 13, 2014 - Linear Technology Corporation
introduces the LTC4079, a 60V, constant-current/constant-voltage
250mA multi-chemistry battery charger. The device’s low quiescent
current linear topology offers a simple inductorless design and
accepts a wide 2.7V to 60V input voltage range. A
resistor-programmable ...
LTC4079 Solar Panel to 2-Cell Li-Ion Charger with Differential Voltage Regulation
Oct 2nd 2014
The LTC®4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, Lead-Acid or NiMH battery stacks up to 60V. The maximum charge current is adjustable from 10mA to 250mA with an external resistor. The battery charge voltage is set using an external resistor ...
LTC4079 Supercap Charger with C/10 Termination
Oct 2nd 2014
The LTC®4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, Lead-Acid or NiMH battery stacks up to 60V. The maximum charge current is adjustable from 10mA to 250mA with an external resistor. The battery charge voltage is set using an external resistor ...
LTC4079 12Vin to 2-Cell NiMH Trickle Charger with Timer Termination
Oct 2nd 2014
The LTC®4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, Lead-Acid or NiMH battery stacks up to 60V. The maximum charge current is adjustable from 10mA to 250mA with an external resistor. The battery charge voltage is set using an external resistor ...
LTC4079 24Vin to 2-Cell Li-Ion Charger with Timer Termination
Oct 2nd 2014
The LTC®4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, Lead-Acid or NiMH battery stacks up to 60V. The maximum charge current is adjustable from 10mA to 250mA with an external resistor. The battery charge voltage is set using an external resistor ...
LTC4079 Lead-Acid Battery Trickle Charger from Rectified 24V AC
Oct 2nd 2014
The LTC®4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, Lead-Acid or NiMH battery stacks up to 60V. The maximum charge current is adjustable from 10mA to 250mA with an external resistor. The battery charge voltage is set using an external resistor ...
LTC4079 Energy Harvesting Charger with Buck, Buck-Boost and LDO Supplies
Oct 2nd 2014
The LTC®4079 is a low quiescent current, high voltage linear charger for most battery chemistry types including Li-Ion/Polymer, Lead-Acid or NiMH battery stacks up to 60V. The maximum charge current is adjustable from 10mA to 250mA with an external resistor. The battery charge voltage is set using an external resistor ...
DC1702A - LTC4071EDDB Demo Board | Shunt Li Ion Charger, 10V ≤ VIN ≤ 16V, 4.1Vout @ 50mA
Oct 25th 2010
Demonstration Circuit DC1702A is a Li-Ion/Polymer Shunt Battery Charger system with Low Battery Disconnect featuring the LTC®4071EDDB. The LTC4071 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. The DC1702 provides up to 50mA of output current at 4.1V ...
Sub 1μA IQ Battery Charger Also Provides Pack Protection
Oct 21st 2010
MILPITAS, CA - October 21, 2010 - Linear Technology Corporation
introduces the LTC4071, an easy-to-use, tiny
shunt battery system for Li-Ion/Polymer batteries that integrates a
charger and battery pack protection in one IC. The LTC4071, with
its 550nA operating current, charges and protects batteries from
previously unusable ...
LTC3105/LTC4071 2-Cell Solar Panel Li-Ion Battery Charger
Oct 5th 2010
This circuit shows a compact solar-powered battery charger using a LTC3105 as a boost converter and a LTC4071 as Li-Ion shunt charger. A 2-cell 400mW solar panel provides the input power to the LTC3105 to produce over 60mA of charge current in full sunlight. Maximum power point control prevents the solar panel voltage from ...
LTC4071 Simple Photovoltaic Charger
Oct 5th 2010
The LTC4071 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. A near-zero current low battery latching disconnect function protects even the lowest capacity batteries from deep discharge and potentially irreparable damage. The 550nA to 50mA operating current ...
LTC4070 50mA/500mA Li-Ion/Polymer Shunt Battery Charger System - Video Product Brief
Jul 9th 2010
The LTC4070 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. The 450nA to 50mA operating current makes charging possible from previously unusable sources. With the addition of an external pass device, shunt current may be boosted to 500mA. Stacked cell high ...
DC1584A - LTC4070EDDB Demo Board | Simple Low-IQ Battery Charger/Protector with NTC Thermistor Input
Feb 23rd 2010
DC1584A - Demo Board for:LTC4070 - Li-Ion/Polymer Shunt Battery Charger System
...
Tiny Sub-1μA IQ Shunt Battery System Charges & Protects Li-Ion/Polymer Batteries
Feb 16th 2010
MILPITAS, CA - February 16, 2010 - Linear Technology Corporation
introduces the LTC4070, an
easy-to-use, tiny shunt battery charger system IC for
Li-Ion/Polymer batteries. The LTC4070, with its 450nA operating
current, charges and protects batteries from previously unusable
very low current, intermittent or continuous charging ...
LTC4070 Photovoltaic Charger with Extremely Low Leakage When Not Charging
Jan 29th 2010
A photovoltaic (PV) application for the LTC4070 is illustrated in this example. In this application, transistor Q1 has been added to further reduce the already low quiescent current of the LTC4070 to achieve extremely low battery discharge when the PV cells are not charging the battery. In long battery life applications, Q1 ...
LTC3588-1/LTC4071 Piezoelectric Energy Harvester with Battery Backup
Jan 6th 2010
The LTC4071 allows simple charging of Li-Ion/Polymer batteries from very low current, intermittent or continuous charging sources. A near-zero current low battery latching disconnect function protects even the lowest capacity batteries from deep discharge and potentially irreparable damage. The 550nA to 50mA operating current ...
Monolithic Linear USB Battery Charger with High Efficiency Dual Synchronous Buck Converters
Jun 7th 2007
MILPITAS, CA - June 7, 2007 - Linear Technology Corporation
announces the LTC3559, an efficient, multi-function power
management solution for handheld applications. The LTC3559
integrates a standalone Li-Ion/Polymer battery charger and two high
efficiency synchronous buck regulators, and is offered in a
low-profile 3mm x 3mm ...
DC1085A - LTC3559EUD Demo Board | USB Li-Ion Linear Charger w/ Dual 400mA Buck Regulators
May 22nd 2007
Demonstration circuit 1085 is a Linear USB Battery Charger with Dual Buck Regulators featuring the LTC3559. The LTC3559 is a CC/CV 5V/USB linear battery charger with dual high efficiency buck regulators. The part is ideally suited to power single cell 4.2V Li-Ion/Polymer-based handheld applications needing multiple supply rails. ...
High-Voltage 950mA Lithium Battery Charger Automatically Selects Between USB or Wall Adapter
Apr 11th 2007
MILPITAS, CA - April 11, 2007 - Linear Technology Corporation
introduces the LTC4075HVX, a standalone dual-input linear battery
charger that efficiently manages charging single-cell
Li-Ion/Polymer batteries from two separate power sources: a wall
adapter and USB. Using a constant-current/constant-voltage
algorithm, the charger ...
Dual Input 1.2A Lithium Battery Charger with Automatic USB & Wall Adapter Power Selection
Mar 5th 2007
MILPITAS, CA - March 5, 2007 - Linear Technology Corporation
introduces the LTC4097 standalone dual-input linear battery
charger. This device charges single-cell Li-Ion/Polymer batteries
from wall adapter or USB power sources. The LTC4097 uses a
constant-current/ constant-voltage algorithm for charging, with
programmable charge ...
USB-Compatible 950mA Standalone Li-Ion Polymer Battery Charger with Thermistor Input in 2mm x 2mm DFN Package
Mar 1st 2007
MILPITAS, CA - March 1, 2007 - Linear Technology Corporation
introduces the LTC4095, a tiny, fully integrated, standalone linear
battery charger for charging single-cell Li-Ion/Polymer batteries
at up to 950mA without overheating the device or its surrounding
components. This fully featured USB-compatible IC offers digital
High ...
DC1101A - LTC4097EDDB Demo Board | Dual Input Standalone Li-Ion Battery Charger w/ NTC
Feb 6th 2007
DC1101A - Demo Board for:LTC4097 - USB/Wall Adapter Standalone Li-Ion/Polymer Battery Charger
...
DC1094A - LTC4095EDC Demo Board
Jan 22nd 2007
DC1094A - Demo Board for:LTC4095 - Standalone USB Li-Ion/Polymer Battery Charger in 2mm x 2mm DFN
...
DC1088A-A - LTC4096EDD Demo Board| Dual Input Stand-Alone Li-Ion Charger
Nov 27th 2006
DC1088A-A - Demo Board for:LTC4096/LTC4096X - Dual Input Standalone Li-Ion Battery Chargers
...
DC1088A-B - LTC4096XEDD Demo Board| Dual Input Stand-Alone Li-Ion Charger
Nov 27th 2006
DC1088A-B - Demo Board for:LTC4096/LTC4096X - Dual Input Standalone Li-Ion Battery Chargers
...
Standalone 1.2A Li-Ion Battery Chargers Automatically Select Between USB and Wall Adapter Inputs
Nov 9th 2006
MILPITAS, CA - November 9, 2006 - Linear Technology Corporation
introduces the LTC4096/X standalone dual-input linear battery
chargers. These devices charge single-cell Li-Ion/Polymer batteries
from wall adapter or USB power sources. The LTC4096/X use a
constant-current/constant-voltage algorithm for charging, with
programmable ...
Miniature 750mA Standalone Li-Ion Battery Charger with Thermistor Input in 2mm x 2mm Package
Dec 27th 2005
MILPITAS, CA - December 27, 2005 - Linear Technology Corporation
introduces the LTC4069, a tiny fully integrated standalone linear
battery charger that can charge a single-cell Li-Ion battery at up
to 750mA without overheating the device or surrounding components.
This full-featured IC offers timer termination, recharge, trickle
charge, ...
High Accuracy 250mA Standalone Li-Ion Coin Cell Battery Charger in
Nov 23rd 2005
MILPITAS, CA - November 23, 2005 - Linear Technology Corporation
introduces the LTC4065L, a tiny fully integrated standalone linear
battery charger that charges single coin cell Li-Ion batteries up
to 250mA without overheating the device or surrounding components.
This full-featured IC offers a 4.2V ±0.5% accurate float voltage,
5% ...
DC973A - LTC4069EDC Demo Board
Nov 10th 2005
DC973A - Demo Board for:LTC4069 - Standalone 750mA Li-Ion Battery Charger in 2 x 2 DFN with NTC Thermistor Input
...
LTC4077 - Standalone 950mA Li-Ion Battery Chargers Automatically Select Between USB and AC Adapter Inputs
Aug 23rd 2005
MILPITAS, CA - August 23, 2005 - Linear Technology Corporation
introduces the LTC4076 and LTC4077 standalone dual-input linear
battery chargers. These devices charge single-cell Li-Ion batteries
from wall adapter or USB power sources. The LTC4076 and LTC4077 use
a constant-current/constant-voltage algorithm for charging, with
charge ...
DC904A-A - LTC4076EDD Demo Board
Aug 22nd 2005
DC904A-A - Demo Board for:LTC4076 - Dual Input Standalone Battery Charger
...
DC904A-B - LTC4077EDD Demo Board
Aug 22nd 2005
DC904A-B - Demo Board for:LTC4077 - Dual Input Standalone Li-Ion Battery Charger
...
Miniature 750mA Standalone Li-Ion Battery Chargers in 2mm x 2mm Package
Jul 27th 2005
MILPITAS, CA - July 27, 2005 - Linear Technology Corporation
introduces the LTC4065 and LTC4065A, tiny fully integrated
standalone linear battery chargers that can charge a single-cell
Li-Ion battery up to 750mA without overheating the device or
surrounding components. These full-featured ICs offer timer
termination, recharge, ...
DC763A - LTC4065EDC Demo Board | Vin=3.75V-5.25V, 650mA Standalone Li-Ion Linear Battery Charger
Jun 29th 2005
Demonstration circuit DC763 is a complete constant-current, constant-voltage battery charger designed to charge single-cell lithium-ion batteries. The DC763 is based on the LTC4065 that is available in a 2mm ´ 2mm DFN package and features an exposed bottom-side metal pad for soldering to the PC board. The LTC4065 features ...
DC867A - LTC4075EDD | Dual Input Li-Ion Charger, Adapter Input=4.5V - 6V, USB Input 4.35V - 5.5V, Li-Ion+ = 800mA, (500mA USB)
Apr 27th 2005
DC867A - Demo Board for:LTC4075 - Dual Input USB/AC Adapter Standalone Li-Ion Battery Chargers
...
DC789A - LTC4062EDD | Single Cell Li-Ion Battery Charger With Comparator, +Vin = 4.3V-8V, Bat = 4.2V@0.5A/1A
Feb 10th 2005
DC789A - Demo Board for:LTC4062 - Standalone Linear Li-Ion Battery Charger with Micropower Comparator
...
DC735A - LTC4063EDD | Lithium-Ion Linear Battery Charger with LDO Regulator, Vin = 4.3V-8V, BAT = 4.2V at 0.5V/1A, LDOout = 3V at 100mA
Dec 16th 2004
DC735A - Demo Board for:LTC4063 - Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator
...
DC788B - LTC4061EDD-4.4 | Single Cell Li-Ion Battery Charger With NTC, +Vin = 4.5V-8V, Bat = 4.4V@0.5A/1A
Dec 15th 2004
DC788B - Demo Board for:LTC4061-4.4 - Standalone Linear Li-Ion Battery Charger with Thermistor Input
...
DC788A - LTC4061EDD | Single Cell Li-Ion Battery Charger, Vin = 4.3V to 8V, Batt = 4.2V@50mA to 1A
Dec 15th 2004
Demonstration circuit 788A is a complete constant-current, constant-voltage battery charger for one Lithium-Ion cell and featuring the LTC4061EDD. The demo board has an input voltage range of 4.3V to 8V, suitable for USB applications. Jumpers on the board allow charge currents from 50mA to 1A to be programmed and several charge ...
DC766A - LTC4068EDD-4.2 | 800mA Stand Alone Li-Ion Charger, Vin = 4.5V - 6.3V, Vout = 800mA Charge, 40mA Termination
Oct 28th 2004
DC766A - Demo Board for:LTC4068-4.2 - Standalone Linear Li-Ion Battery Charger with Programmable Termination
...
DC783A - LTC4060EFE Demo Board | 2A NiMH/NiCD Linear Charger with Termination, Vin = 4.5V to 10V, IOUT = 0.5A/1A/2A
Sep 2nd 2004
Demonstration circuit 783 is a complete Fast Battery Charger capable of charging 1, 2, 3 or 4 series connected NiMH or NiCd cells using the LTC4060 linear battery charger. This demo circuit determines when the battery is fully charged using the -ΔV method with peak voltage and a safety timer as a backup termination. The ...
DC685A - LTC4059EDC | 750mA Linear Battery Charger, +Vin = 3.8V to 6.3V, Iout (Max) = 750mA
Nov 20th 2003
DC685A - Demo Board for:LTC4059/LTC4059A - 900mA Linear Li-Ion Battery Chargers with Thermal Regulation in 2 × 2 DFN
...
DC708A - LTC4064EMSE | 4.0V Li-Ion Battery Charger, Vin = 4.25V to 6.3V, Bat = 4.0V @ 0.5A / 1A
Jul 29th 2003
DC708A - Demo Board for:LTC4064 - Monolithic Linear Charger for Back-Up Li-Ion Batteries
...
DC672A - LTC4058EDD-4.2 | Li-Ion Battery Charger, 4.25V to 6.3Vin, 800mA Output
Jul 22nd 2003
DC672A - Demo Board for:LTC4058-4.2 - Standalone Linear Li-Ion Battery Chargers with Thermal Regulation in DFN
...
DC654A - LTC4057ES5-4.2 | Li-Ion Battery Charger, 4.25 to 6.5Vin, 600mA
Apr 28th 2003
DC654A - Demo Board for:LTC4057-4.2 - Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT
...
DC606A - LTC4056ETS8-4.2 | Li-Ion Charger with Termination, 4.25 to 6.5Vin, Jumper selectable, 450mA or 700mA
Feb 12th 2003
DC606A - Demo Board for:LTC4056-4.2 - Linear Li-Ion Charger with Termination in ThinSOT
...
DC705A - LTC4053EMSE-4.2 | Li-Ion Battery Charger, Vin = 4.25V to 6.3V, Bat = 4.2V @ 0.5A / 1A
Aug 23rd 2002
DC705A - Demo Board for:LTC4053-4.2 - USB Compatible Lithium-Ion Battery Charger with Thermal Regulation
...
DC567A - LTC4053EMSE-4.2 LTC4410ES6 | USB Compliant Battery Charger, 4.25 to 6Vin, Jumper selectable, 100mA or 500mA
Aug 23rd 2002
DC567A - Demo Board for:LTC4053-4.2 - USB Compatible Lithium-Ion Battery Charger with Thermal Regulation
...
DC454A - LTC1733EMSE | Linear Battery Charger For One Li-Ion Cell, 1.25A Charge Current, Vin = 5V
Dec 4th 2001
DC454A - Demo Board for:LTC1733 - Monolithic Linear Lithium-Ion Battery Charger with Thermal Regulation
...
DC530A-B - LTC4050EMS-4.2 | Li-Ion Battery Charger with NTC, Vin = 4.5V-6V, Vbat = 4.2V, Ibat = 700mA
Nov 26th 2001
DC530A-B - Demo Board for:LTC4050 - Lithium-Ion Linear Battery Charger Controller with Thermistor Interface
...
DC530A-A - LTC4050EMS-4.1 | Li-Ion Battery Charger with NTC, Vin = 4.5V-6V, Vbat = 4.1V, Ibat = 700mA
Nov 26th 2001
DC530A-A - Demo Board for:LTC4050 - Lithium-Ion Linear Battery Charger Controller with Thermistor Interface
...
DC364A-B - LTC1732EMS-4.2 | Linear Battery Charger For One Li-Ion Cell, 700mA Charge Current, Vin=5V
Aug 7th 2000
DC364A-B - Demo Board for:LTC1732-4.2 - Lithium-Ion Linear Battery Charger Controller
...
DC370A-B - LTC1734ES6-4.2 | Li-Ion Battery Charger
Aug 7th 2000
DC370A-B - Demo Board for:LTC1734 - Lithium-Ion Linear Battery Charger in ThinSOT
...
DC370A-A - LTC1734ES6-4.1 | Li-Ion Battery Charger
Aug 7th 2000
DC370A-A - Demo Board for:LTC1734 - Lithium-Ion Linear Battery Charger in ThinSOT
...
DC299A-D - LT1769CGN, LTC1729CMS8 | 2A Li-Ion Battery Charger with Termination Controller, 12V to 25V Input, 8.4Vout @ 2A Max.
Apr 18th 1999
DC299A-D - Demo Board for:LT1769 - Constant-Current/Constant-Voltage 2A Battery Charger with Input Current LimitingLTC1729 - Li-Ion Battery Charger Termination Controllers
...
DC294A-D - LTC1729CMS8-8.4, LT1510-5CGN | Termination Controllers / Li-Ion Battery Charger, 11.5V to 28V Input, 8.4Vout @ 1A Max. (marking LTJG)
Nov 14th 1995
DC294A-D - Demo Board for:LT1510 - Constant-Voltage/Constant-Current Battery ChargerLTC1729 - Li-Ion Battery Charger Termination Controllers
...
DC294A-B - LTC1729CMS8-4.2, LT1510-5CGN | Termination Controllers / Li-Ion Battery Charger, 8.2V to 20V Input, 4.2Vout @ 1A Max. (marking LTJH)
Nov 14th 1995
DC294A-B - Demo Board for:LT1510 - Constant-Voltage/Constant-Current Battery ChargerLTC1729 - Li-Ion Battery Charger Termination Controllers
...
Loading