1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - LT6016 - Dual 3.2MHz, 0.8V/μs Low Power, Over-The-Top Precision Op Amp

Op Amp Precision Positive & Negative Clipper using LT6015/LT6016/LT6017

Tom Mosteller - Field Applications Engineer
Aaron Schultz - Applications Manager Signal Conditioning
Oct 3rd 2016
It can be a challenge to match the voltage range of an analog signal to the input range of an analog to digital converter (ADC). Exceeding the ADC’s input range will give an incorrect reading, and if the input goes far enough beyond the power supply rails substrate currents can flow into the ADC which can cause latch up ...

Blog Post Circuit LTspice 

 

Positive to Negative Converter with Variable Output Using LTC3630 and LT6015/LT6016

Philip Lane - Field Applications Engineer
Gabino Alonso - Strategic Marketing Engineer
Sep 1st 2015
There was a window of time in the 1950s and early ’60s when negative voltage rails were commonplace, when germanium PNP transistors were prevalent—like those used in an old “transistor radio”, now worth a fortune on Ebay. Nowadays, NPN transistors are more prevalent, since they basically work ...

Blog Post Circuit LTspice 

 

LT6016: Precision High Voltage High Side Load Current Monitor

Nov 5th 2012
The LT6016/LT6017 are dual and quad rail-to-rail input operational amplifiers with input offset voltage trimmed to less than 50μV. These amplifiers operate on single and split supplies with a total voltage of 3V to 50V and draw only 315μA per amplifier. The Over-The-Top input stage of the LT6016/LT6017 is designed to provide ...

Circuit LTspice 

 

LT6016 Wide Input Range Current Sense Amp Goes Hi-Z When VSUPPLY Removed

Nov 5th 2012
The LT®6015/LT6016/LT6017 are single/dual/quad rail-torail input operational amplifiers with input offset voltage trimmed to less than 50μV. These amplifiers operate on single and split supplies with a total voltage of 3V to 50V and draw only 315μA per amplifier. They are reverse battery protected, drawing very little ...

Circuit 

 

LT6016 Extended Supply Current Boosted Gain of Three Amplifier Drives 100Ω Load to ±30V, with 600mA Current Limit

Nov 5th 2012
The LT®6015/LT6016/LT6017 are single/dual/quad rail-torail input operational amplifiers with input offset voltage trimmed to less than 50μV. These amplifiers operate on single and split supplies with a total voltage of 3V to 50V and draw only 315μA per amplifier. They are reverse battery protected, drawing very little ...

Circuit