Solutions Search - LT3092 - 200mA 2-Terminal Programmable Current Source
LTSpice: Plotting a Parameter Against Something Other Than Time (e.g. Resistance)
Mar 25th 2016
A common use for LTSpice® is to run a time domain transient analysis where a parameter (e.g. voltage or current) can be plotted against time. Occasionally, you may wish to know the behavior of a circuit versus another parameter such as resistance. This can be done by using the “.measure” and “.step” ...
DC2132A - 24V 3A Constant Voltage, Constant Current Bench Supply Featuring LT3081, LT8612, LT3092
May 22nd 2014
DC2132A is a 24V 3A constant voltage, constant current bench supply. It regulates any output voltage from 0V to 24V and any output current from 0A to 3A. It runs from 10V to 40V input although the output voltage should remain 5V or more below the input voltage.
...
DC1531A - LT3092EDD Demo Board | 200mA 2-Terminal Programmable Current Source
Oct 22nd 2009
DC1531A - Demo Board for:LT3092 - 200mA 2-Terminal Programmable Current Source
...
IC Current Sources - LT3092
Sep 15th 2009
Current sources have been a well known but theoretical circuit component. Unlike voltage sources, a 0.01% accurate 2-terminal current source has been an elusive component that is not easily available and difficult to design. With the introduction of the LT3092, the current source as a drop-in component becomes a reality.
The ...
Programmable 200mA Two-Terminal Current Source Has 10PPM Regulation
Apr 27th 2009
MILPITAS, CA - April 27, 2009 - An innovative new power IC from
Linear Technology Corporation now provides system designers with a
two-terminal current source. Until now, current sources were
imprecise or had to be designed from other components. The new
LT3092 200mA two-terminal
current source overcomes the problems associated ...
DAC Controlled 100mA Current Source
Apr 22nd 2009
The LT3092 easily interfaces with an external DAC to allow digital current control.
...
Parallel Current Sources For Higher Current 300mA Output
Apr 22nd 2009
The LT3092 can easily be paralleled for higher current outputs
...
2-Terminal Temperature-to-Current Thermometer Suitable for Use at the End of Long Wire Runs
Apr 22nd 2009
By adding the LT3092 to a thermistor kit along with three 0.1% accuracy resistors and one final trim, a very accurate 2-terminal temperature-to-current converter can be built. This circuit measures 700μA operating current at 0°C, dropping by 2μA every degree until 100°C, at which point the current measures 500μA. The obvious ...
High Voltage 100mA Current Source
Apr 22nd 2009
An external zener diodes protects the LT3092 and allows the part to be used in high voltage applications.
...
High Accuracy 10mA Current Source
Apr 22nd 2009
An external reference improves the initial accuracy and temperature drift of the LT3092 current source. ...
Adjustable Two Terminal 200mA Current Source
Apr 22nd 2009
The LT3092 requires only two resistors to set the current between 0.5mA and 200mA ...
2-Terminal Temperature-to-Current Thermometer Suitable for Use at the End of Long Wire Runs
Apr 22nd 2009
By adding the LT3092 to the thermistor kit along with three 0.1% accuracy resistors and one fi nal trim, a very accurate 2-terminal temperature-to-current converter can be built. This circuit measures 700μA operating current at 0°C, dropping by 2μA every degree until 100°C, at which point the current measures 500μA. The ...
Loading