1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - LED Driver ICs

LT3598 LED Driver for 30 White LEDs with 60mA Each String

Oct 5th 2016
The LT3598 is a fixed frequency step-up DC/DC converter designed to drive up to six strings of LEDs at an output voltage up to 44V. LED dimming can be achieved with analog dimming on the CTRL pin, and with pulse width modulation dimming on the PWM pin. The LT3598 accurately regulates LED current even when the input voltage is ...

Circuit 

 

LT3598 Auto Battery Powered Driver for 20 LEDs with 90mA Each String

Oct 5th 2016
The LT3598 is a fixed frequency step-up DC/DC converter designed to drive up to six strings of LEDs at an output voltage up to 44V. LED dimming can be achieved with analog dimming on the CTRL pin, and with pulse width modulation dimming on the PWM pin. The LT3598 accurately regulates LED current even when the input voltage is ...

Circuit 

 

LT3598 2MHz LED Driver for 20 White LEDs

Oct 5th 2016
The LT3598 is a fixed frequency step-up DC/DC converter designed to drive up to six strings of LEDs at an output voltage up to 44V. LED dimming can be achieved with analog dimming on the CTRL pin, and with pulse width modulation dimming on the PWM pin. The LT3598 accurately regulates LED current even when the input voltage is ...

Circuit 

 

LT3598 1 MHz LED Driver for 36 White LEDs

Oct 5th 2016
The LT3598 is a fixed frequency step-up DC/DC converter designed to drive up to six strings of LEDs at an output voltage up to 44V. LED dimming can be achieved with analog dimming on the CTRL pin, and with pulse width modulation dimming on the PWM pin. The LT3598 accurately regulates LED current even when the input voltage is ...

Circuit 

 

LT3598 90% Efficient LED Driver for 60 White LEDs

Oct 5th 2016
The LT3598 is a fixed frequency step-up DC/DC converter designed to drive up to six strings of LEDs at an output voltage up to 44V. LED dimming can be achieved with analog dimming on the CTRL pin, and with pulse width modulation dimming on the PWM pin. The LT3598 accurately regulates LED current even when the input voltage is ...

Circuit 

 

LT3591 24V to Four White LEDs at 100mA

Oct 5th 2016
The LT3591 is a fixed frequency step-up DC/DC converter specifi cally designed to drive up to ten white LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The device features a unique high side LED current ...

Circuit 

 

LT3591 Li-Ion Driver for Seven White LEDs

Oct 5th 2016
The LT3591 is a fixed frequency step-up DC/DC converter specifi cally designed to drive up to ten white LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The device features a unique high side LED current ...

Circuit 

 

LT3591 Li-Ion Driver for Nine White LEDs

Oct 5th 2016
The LT3591 is a fixed frequency step-up DC/DC converter specifi cally designed to drive up to ten white LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness and eliminating the need for ballast resistors. The device features a unique high side LED current ...

Circuit 

 

LT3517 Buck Mode 1A LED Driver

Sep 13th 2016
The LT3517 is a current mode DC/DC converter with an internal 1.5A, 45V switch specifically designed to drive LEDs. The LT3517 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3517 350mA, 5V to 12V Boost Converter with Accurate Input Current Limit

Sep 13th 2016
The LT3517 is a current mode DC/DC converter with an internal 1.5A, 45V switch specifically designed to drive LEDs. The LT3517 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3517 Low Side current Sensing Load Dump Protected Buck-Boost Mode LED Driver

Sep 13th 2016
The LT3517 is a current mode DC/DC converter with an internal 1.5A, 45V switch specifically designed to drive LEDs. The LT3517 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3517 Boost 100mA LED Driver with LED Open Protection

Sep 13th 2016
The LT3517 is a current mode DC/DC converter with an internal 1.5A, 45V switch specifically designed to drive LEDs. The LT3517 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3517 5.5V SEPIC Convener with Short-Circuit Protection

Sep 13th 2016
The LT3517 is a current mode DC/DC converter with an internal 1.5A, 45V switch specifically designed to drive LEDs. The LT3517 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3465 Li-Ion to Five White LEDs

Sep 12th 2016
The LT3465/LT3465A are step-up DC/DC converters designed to drive up to six LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical LED currents and eliminates the need for ballast resistors. These devices integrate the Schottky diode required externally on competing devices. Additional features include ...

Circuit 

 

LT3465 Li-Ion to Six White LEDs

Sep 12th 2016
The LT3465/LT3465A are step-up DC/DC converters designed to drive up to six LEDs in series from a Li-Ion cell. Series connection of the LEDs provides identical LED currents and eliminates the need for ballast resistors. These devices integrate the Schottky diode required externally on competing devices. Additional features include ...

Circuit 

 

LTC3200 Regulated 5V Output from a 2.7V to 4.5V Input

Sep 12th 2016
A new charge-pump architecture maintains constant switching frequency to zero load and reduces bith output and input ripple. The LTC3200/LTC3200-5 have thermal shutdown capability and can survive a continuous short-circuit from VOUT to GND. Built-in soft-start circuitry prevents excessive inrush curreent during start-up. ...

Circuit 

 

LTC3200 Lithium-Ion Battery to 5V White or Blue LED Driver

Sep 12th 2016
A new charge-pump architecture maintains constant switching frequency to zero load and reduces bith output and input ripple. The LTC3200/LTC3200-5 have thermal shutdown capability and can survive a continuous short-circuit from VOUT to GND. Built-in soft-start circuitry prevents excessive inrush curreent during start-up. ...

Circuit 

 

LT3486 1 Li-Ion Cell to Dual 8 White LEDs

Sep 12th 2016
The LT3486 is a dual step-up DC/DC converter specifically designed to drive up to 16 White LEDs (8 in series per converter) at constant current from a single Li-Ion cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness. The two independent converters are capable of driving asymmetric ...

Circuit 

 

LT3486 5V to Dual 16 White LEDs @ 25mA

Sep 12th 2016
The LT3486 is a dual step-up DC/DC converter specifically designed to drive up to 16 White LEDs (8 in series per converter) at constant current from a single Li-Ion cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness. The two independent converters are capable of driving asymmetric ...

Circuit 

 

LT3486 12V to Dual 8 White LEDs @ 100mA

Sep 12th 2016
The LT3486 is a dual step-up DC/DC converter specifically designed to drive up to 16 White LEDs (8 in series per converter) at constant current from a single Li-Ion cell. Series connection of the LEDs provides identical LED currents resulting in uniform brightness. The two independent converters are capable of driving asymmetric ...

Circuit 

 

LT3476 5V to 25V Buck-Boost Mode Driver for 2 Series 350mA LEDs

Sep 12th 2016
The LT3476 is a quad output DC/DC converter designed to operate as a constant-current source for driving high current LEDs. A fixed frequency, current mode architecture results in stable operation over a wide range of supply and output voltages. A frequency adjust pin allows the user to program switching frequency between ...

Circuit 

 

LT3476 Buck Mode 100W Quad 1A × 8 LED Driver

Sep 12th 2016
The LT3476 is a quad output DC/DC converter designed to operate as a constant-current source for driving high current LEDs. A fixed frequency, current mode architecture results in stable operation over a wide range of supply and output voltages. A frequency adjust pin allows the user to program switching frequency between 200kHz ...

Circuit 

 

LT3476 Quad Boost 200mA × 8LED Driver

Sep 12th 2016
The LT3476 is a quad output DC/DC converter designed to operate as a constant-current source for driving high current LEDs. A fixed frequency, current mode architecture results in stable operation over a wide range of supply and output voltages. A frequency adjust pin allows the user to program switching frequency between 200kHz ...

Circuit 

 

LT3599 12W LED Driver 1MHz Boost, 80mA per String, 10 LEDs per String

Sep 9th 2016
The LT3599 is a fixed frequency 2A step-up DC/DC converter designed to drive four strings of 120mA LEDs up to a 44V output voltage. The switching frequency is programmable from 200kHz to 2.1MHz through an external resistor. ...

Circuit 

 

LT3599 12W LED Driver 400kHz Boost, Two LED Strings, 200mA per String, 8 LEDs per String

Sep 9th 2016
The LT3599 is a fixed frequency 2A step-up DC/DC converter designed to drive four strings of 120mA LEDs up to a 44V output voltage. The switching frequency is programmable from 200kHz to 2.1MHz through an external resistor. ...

Circuit 

 

LT3599 7W LED Driver SEPIC (Survives Output Short to Ground) 300kHz, Three Strings, 100mA per String, 6 LEDs per String

Sep 9th 2016
The LT3599 is a fixed frequency 2A step-up DC/DC converter designed to drive four strings of 120mA LEDs up to a 44V output voltage. The switching frequency is programmable from 200kHz to 2.1MHz through an external resistor. ...

Circuit 

 

LT3599 8W LED Driver 2MHz Boost, Three Strings, 100mA per String, 7 LEDs per String

Sep 9th 2016
The LT3599 is a fixed frequency 2A step-up DC/DC converter designed to drive four strings of 120mA LEDs up to a 44V output voltage. The switching frequency is programmable from 200kHz to 2.1MHz through an external resistor. ...

Circuit 

 

LT3599 2.1 MHz Boost, Four Strings, 80mA per String, 7 LEDs per String

Sep 9th 2016
The LT3599 is a fixed frequency 2A step-up DC/DC converter designed to drive four strings of 120mA LEDs up to a 44V output voltage. The switching frequency is programmable from 200kHz to 2.1MHz through an external resistor. ...

Circuit 

 

LT3744 Boost Mode 3A LED Driver with 98% Efficiency

Sep 9th 2016
The LT®3744 is a fixed frequency synchronous step-down DC/DC controller designed to drive a LED load at up to 20A continuous or 40A pulsed. The peak current mode controller will maintain ±3% LED current regulation over a wide output voltage range, from VEE to VIN. By allowing VEE to float to negative voltages, several ...

Circuit 

 

LT3474 Step-Down 1A LED Driver with PWM Dimming

Sep 9th 2016
The LT3474/LT3474-1 are fixed frequency step-down DC/DC converters designed to operate as constant-current sources. An internal sense resistor monitors the output current allowing accurate current regulation, ideal for driving high current LEDs. High output current accuracy is maintained over a wide current range, from 35mA ...

Circuit 

 

LT3474 Step-Down 1A LED Driver with Two Series Connected LED Output

Sep 9th 2016
The LT3474/LT3474-1 are fixed frequency step-down DC/DC converters designed to operate as constant-current sources. An internal sense resistor monitors the output current allowing accurate current regulation, ideal for driving high current LEDs. High output current accuracy is maintained over a wide current range, from 35mA ...

Circuit 

 

LT3474 Step-Down 1A LED Driver with Four Series Connected LED Output

Sep 9th 2016
The LT3474/LT3474-1 are fixed frequency step-down DC/DC converters designed to operate as constant-current sources. An internal sense resistor monitors the output current allowing accurate current regulation, ideal for driving high current LEDs. High output current accuracy is maintained over a wide current range, from 35mA ...

Circuit 

 

LT8611 12V Step-Down with 1A Output Current Limit

Sep 9th 2016
The LT®8611 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5μA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. The built-in current sense amplifier with monitor ...

Circuit 

 

LT8611 1V Step-Down with 2A Output Current Limit

Sep 9th 2016
The LT®8611 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5μA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. The built-in current sense amplifier with monitor ...

Circuit 

 

LT8611 Coincident Tracking Step-Downs Each with 2A Output Current Limit

Sep 9th 2016
The LT®8611 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5μA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. The built-in current sense amplifier with monitor ...

Circuit 

 

LT8611 2A LED Driver

Sep 9th 2016
The LT®8611 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 2.5μA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. The built-in current sense amplifier with monitor ...

Circuit 

 

LT3478 15W, 6 LEDs at 700mA, Boost LED Driver

Sep 9th 2016
The LT3478-1 reduces external component count and cost by integrating the LED current sense resistor. The LT3478 uses an external sense resistor to extend the maximum programmable LED current beyond 1A and also to achieve greater accuracy when programming low LED currents. Operating frequency can be set with an external resistor ...

Circuit 

 

LT3478 17W, 15 LEDs at 350mA, Boost LED Driver plus LT3003

Sep 9th 2016
The LT3478-1 reduces external component count and cost by integrating the LED current sense resistor. The LT3478 uses an external sense resistor to extend the maximum programmable LED current beyond 1A and also to achieve greater accuracy when programming low LED currents. Operating frequency can be set with an external resistor ...

Circuit 

 

LT3478 16W, 12 LEDs at 350mA, Buck-Boost Mode LED Driver plus LT3003

Sep 9th 2016
The LT3478-1 reduces external component count and cost by integrating the LED current sense resistor. The LT3478 uses an external sense resistor to extend the maximum programmable LED current beyond 1A and also to achieve greater accuracy when programming low LED currents. Operating frequency can be set with an external resistor ...

Circuit 

 

LT3478 4W, 1 LED at 1A, Buck-Boost Mode LED Driver

Sep 9th 2016
The LT3478-1 reduces external component count and cost by integrating the LED current sense resistor. The LT3478 uses an external sense resistor to extend the maximum programmable LED current beyond 1A and also to achieve greater accuracy when programming low LED currents. Operating frequency can be set with an external resistor ...

Circuit 

 

LT3478 24W, 4 LEDs at 1.5A, Buck Mode LED Driver

Sep 9th 2016
The LT3478-1 reduces external component count and cost by integrating the LED current sense resistor. The LT3478 uses an external sense resistor to extend the maximum programmable LED current beyond 1A and also to achieve greater accuracy when programming low LED currents. Operating frequency can be set with an external resistor ...

Circuit 

 

LT3478 6W, 6 LEDs at 250mA, Boost LED Driver

Sep 9th 2016
The LT3478-1 reduces external component count and cost by integrating the LED current sense resistor. The LT3478 uses an external sense resistor to extend the maximum programmable LED current beyond 1A and also to achieve greater accuracy when programming low LED currents. Operating frequency can be set with an external resistor ...

Circuit 

 

LT3795 Short-Circuit Robust Boost LED Driver with Input Current Limit and Spread Spectrum Frequency Modulation

Sep 8th 2016
The LT®3795 is a DC/DC controller designed to regulate a constant-current or constant-voltage and is ideal for driving LEDs. It drives a low side external N-channel power MOSFET from an internal regulated 7.7V supply. The fixed frequency and current mode architecture result in stable operation over a wide range of supply ...

Circuit 

 

LT3795 SEPIC LED Driver with Input Current Limit

Sep 8th 2016
The LT®3795 is a DC/DC controller designed to regulate a constant-current or constant-voltage and is ideal for driving LEDs. It drives a low side external N-channel power MOSFET from an internal regulated 7.7V supply. The fixed frequency and current mode architecture result in stable operation over a wide range of supply ...

Circuit 

 

LT3795 Buck Mode LED Driver

Sep 8th 2016
The LT®3795 is a DC/DC controller designed to regulate a constant-current or constant-voltage and is ideal for driving LEDs. It drives a low side external N-channel power MOSFET from an internal regulated 7.7V supply. The fixed frequency and current mode architecture result in stable operation over a wide range of supply ...

Circuit 

 

LT3795 Buck Mode LED Driver with 3000:1 PWM Dimming

Sep 8th 2016
The LT®3795 is a DC/DC controller designed to regulate a constant-current or constant-voltage and is ideal for driving LEDs. It drives a low side external N-channel power MOSFET from an internal regulated 7.7V supply. The fixed frequency and current mode architecture result in stable operation over a wide range of supply ...

Circuit 

 

LT3518 Buck Mode 1.5A LED Driver

Sep 8th 2016
The LT3518 is a current mode DC/DC converter with an internal 2.3A, 45V switch specifically designed to drive LEDs. The LT3518 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3518 Buck-Boost Mode LED Driver

Sep 8th 2016
The LT3518 is a current mode DC/DC converter with an internal 2.3A, 45V switch specifically designed to drive LEDs. The LT3518 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3518 Buck Mode 1A LED Driver with Open LED Protection and Sync Input

Sep 8th 2016
The LT3518 is a current mode DC/DC converter with an internal 2.3A, 45V switch specifically designed to drive LEDs. The LT3518 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3518 Boost 300mA LED Driver with LED Open Protection

Sep 8th 2016
The LT3518 is a current mode DC/DC converter with an internal 2.3A, 45V switch specifically designed to drive LEDs. The LT3518 operates as a LED driver in boost, buck mode and buck-boost mode. It combines a traditional voltage loop and a unique current loop to operate as a constant-current source or constant-voltage source. ...

Circuit 

 

LT3755 20W SEPIC LED Driver

Sep 6th 2016
The LT3755, LT3755-1 and LT3755-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3755 Buck Mode 1.4A LED Driver

Sep 6th 2016
The LT3755, LT3755-1 and LT3755-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3755 Buck Mode 500mA LED Driver for 20kHz PWM Dimming

Sep 6th 2016
The LT3755, LT3755-1 and LT3755-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3755 21W Buck-Boost Mode with 250:1 PWM Dimming and Open LED Protection

Sep 6th 2016
The LT3755, LT3755-1 and LT3755-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3755 Buck-Boost LED Driver for Automotive

Sep 6th 2016
The LT3755, LT3755-1 and LT3755-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3756 30W White LED Headlamp Driver with Thermal Derating

Sep 6th 2016
The LT3756, LT3756-1 and LT3756-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current-mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3756 Buck-Boost Mode LED Driver

Sep 6th 2016
The LT3756, LT3756-1 and LT3756-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current-mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3756 90% Efficient, 20W SEPIC LED Driver

Sep 6th 2016
The LT3756, LT3756-1 and LT3756-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current-mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3756 Buck Mode 1A LED Driver with High Dimming Ratio and Open LED Reporting

Sep 6th 2016
The LT3756, LT3756-1 and LT3756-2 are DC/DC controllers designed to operate as a constant-current source for driving high current LEDs. They drive a low side external N-channel power MOSFET from an internal regulated 7.15V supply. The fixed frequency, current-mode architecture results in stable operation over a wide range of ...

Circuit 

 

LT3741 20A LED Driver

Sep 6th 2016
The LT®3741 and LT3741-1 are fixed frequency synchronous step-down DC/DC controllers designed to accurately regulate the output current at up to 20A. The average currentmode controller will maintain inductor current regulation over a wide output voltage range of 0V to (VIN – 2V). The regulated current is set by an ...

Circuit 

 

LTM8040 Step Down 1A Drive with Single Red or White LED

Sep 2nd 2016
The LTM8040 is a fixed frequency 1A step-down DC/DC μModule (power module) regulator designed to operate as a constant current source. Internal circuitry monitors the output current to provide accurate current regulation, which is ideal for driving high current LEDs. High output current accuracy is maintained over a wide ...

Circuit 

 

LTM8040 Step Down 350mA Drive with Three Series Red LEDs

Sep 2nd 2016
The LTM8040 is a fixed frequency 1A step-down DC/DC μModule (power module) regulator designed to operate as a constant current source. Internal circuitry monitors the output current to provide accurate current regulation, which is ideal for driving high current LEDs. High output current accuracy is maintained over a wide ...

Circuit 

 

LTM8040 Step Down 1A Drive with Four Series Red LEDs

Sep 2nd 2016
The LTM8040 is a fixed frequency 1A step-down DC/DC μModule (power module) regulator designed to operate as a constant current source. Internal circuitry monitors the output current to provide accurate current regulation, which is ideal for driving high current LEDs. High output current accuracy is maintained over a wide ...

Circuit 

 

LTM8042 Boost Operation, Driving 6 White LEDs at 1A

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

Circuit 

 

LTM8042 Boost Operation, Driving 9 White LEDs at 100mA

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

Circuit 

 

LTM8042 Buck-Boost Mode, Driving 5 White LEDs at 500mA with PWM Dimming

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

Circuit 

 

LTM8042 Buck Mode, Driving 4 White LEDs at 1A

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

Circuit 

 

LTM8042 Boost Operation, Driving 9 Red LEDs at 350mA with Analog Dimming

Sep 2nd 2016
The LTM8042 is a complete μModule (power module) Boost LED Driver specifically designed to drive LEDs up to 1A, while the LTM8042-1 drives up to 350mA. It combines a boost power topology with a unique current loop to operate as a constant-current source. The PWM input provides as much as 3000:1 LED dimming, while 10:1 analog ...

Circuit 

 

LT3965 Matrix LED Dimmer Powered by a Dual Buck Mode LED Driver with a Boost Pre-Regulator

Sep 2nd 2016
The LT®3965 is an LED bypass switching device for dimming individual LEDs in a string using a common current source. It features eight individually controlled floating source 17V/330mΩ NMOS switches. The eight switches can be connected in parallel and/or in series to bypass current around one or more LEDs in a string. ...

Circuit 

 

LT3965 Matrix LED Dimmer Powered by a Boost-Buck LED Driver

Sep 2nd 2016
The LT®3965 is an LED bypass switching device for dimming individual LEDs in a string using a common current source. It features eight individually controlled floating source 17V/330mΩ NMOS switches. The eight switches can be connected in parallel and/or in series to bypass current around one or more LEDs in a string. ...

Circuit 

 

LT8391 98% Efficient 50W (25V 2A) Buck-Boost LED Driver

Sep 2nd 2016
The LT®8391 is a synchronous 4-switch buck-boost LED controller that regulates LED current from input voltage above, below, or equal to the output voltage. The proprietary peak-buck peak-boost current mode control scheme allows adjustable and synchronizable 150kHz to 650kHz fixed frequency operation, or internal ±15% ...

Circuit 

 

LT8391 95% Efficient 12W (12V 1A) Buck-Boost LED Driver with Dual Package MOSFETs

Sep 2nd 2016
The LT®8391 is a synchronous 4-switch buck-boost LED controller that regulates LED current from input voltage above, below, or equal to the output voltage. The proprietary peak-buck peak-boost current mode control scheme allows adjustable and synchronizable 150kHz to 650kHz fixed frequency operation, or internal ±15% ...

Circuit Press Release 

 

LT8391 93% Efficient 84W Buck-Boost LED Driver from 24VAC

Sep 2nd 2016
The LT®8391 is a synchronous 4-switch buck-boost LED controller that regulates LED current from input voltage above, below, or equal to the output voltage. The proprietary peak-buck peak-boost current mode control scheme allows adjustable and synchronizable 150kHz to 650kHz fixed frequency operation, or internal ±15% ...

Circuit 

 

LT8391 98% Efficient 100W (33.3V 3A) Buck-Boost LED Driver

Sep 2nd 2016
The LT®8391 is a synchronous 4-switch buck-boost LED controller that regulates LED current from input voltage above, below, or equal to the output voltage. The proprietary peak-buck peak-boost current mode control scheme allows adjustable and synchronizable 150kHz to 650kHz fixed frequency operation, or internal ±15% ...

Circuit 

 

LT3763 20A, Pulse Width Modulated, Single LED Driver

Sep 2nd 2016
The LT3763 is a fixed frequency, synchronous, step-down DC/DC controller designed to accurately regulate output currents up to 20A. The average current mode control- ler will maintain inductor current regulation over a wide output voltage range from 0V to 55V. Output current is set by analog voltages on the CTRL pins and an ...

Circuit 

 

LT3763 1A, Five LED Driver

Sep 2nd 2016
The LT3763 is a fixed frequency, synchronous, step-down DC/DC controller designed to accurately regulate output currents up to 20A. The average current mode control- ler will maintain inductor current regulation over a wide output voltage range from 0V to 55V. Output current is set by analog voltages on the CTRL pins and an ...

Circuit 

 

LT3763 350W White LED Driver

Sep 2nd 2016
The LT3763 is a fixed frequency, synchronous, step-down DC/DC controller designed to accurately regulate output currents up to 20A. The average current mode control- ler will maintain inductor current regulation over a wide output voltage range from 0V to 55V. Output current is set by analog voltages on the CTRL pins and an ...

Circuit 

 

LT8613 5A LED Driver

Sep 2nd 2016
The LT®8613 is a compact, high efficiency, high speed synchronous monolithic step-down switching regulator that consumes only 3μA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. The built-in current sense amplifier with monitor ...

Circuit 

 

LT3922 Low EMI 400kHz, 96°/o Eificient 10W (30V, 333mA) Boost LED Driver with SSFM

Aug 31st 2016
The LT3922 is a monolithic, synchronous, step-up DC/DC converter that utilizes fixed-frequency, peak current control and provides PWM dimming for a string of LEDs. The LED current is programmed by an analog voltage or the duty cycle of pulses at the CTRL pin. The LT3922 will maintain ±2% current regulation through an ...

Circuit 

 

LT3922 500mA Boost LED Driver Using Pulse Duty Cycle CTRL Input

Aug 31st 2016
The LT3922 is a monolithic, synchronous, step-up DC/DC converter that utilizes fixed-frequency, peak current control and provides PWM dimming for a string of LEDs. The LED current is programmed by an analog voltage or the duty cycle of pulses at the CTRL pin. The LT3922 will maintain ±2% current regulation through an ...

Circuit 

 

Too many results please adjust your filters