Solutions Search - LDO Linear Regulators

Hybrid Wide Dimming Ratio Linear LED Current Controller Using LT8614 & LT3083/LT6015

Tom Mosteller - Field Applications Engineer Oct 17th 2016
Many applications for LED illumination require wide dimming ratios. This can be accomplished simply via an adjustable current source as show below.  The current source can be varied by a number of different means, and a large LED current range can be achieved. The primary problem with this technique is that the power dissipation ...

 

LT3045 500mA, Ultralow Noise, Ultrahigh PSRR Linear Regulator

Sep 21st 2016
The LT®3045 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3045 can be easily paralleled to further reduce noise, ...

 

Paralleling Multiple LT3045s for 2A Output Current

Sep 21st 2016
The LT®3045 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3045 can be easily paralleled to further reduce noise, ...

 

LT3045 Parallel Devices For 5Vin to 3.3Vout @ 1A With Ultralow Noise

Sep 21st 2016
The LT®3045 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3045 can be easily paralleled to further reduce noise, ...

 

LT3080 Low Dropout Voltage LED Driver

Sep 15th 2016
The LT3080 is a 1.1A low dropout linear regulator that can be paralleled to increase output current or spread heat in surface mounted boards. Architected as a precision current source and voltage follower allows this new regulator to be used in many applications requiring high current, adjustability to zero, and no heat sink. ...

 

LT3090 5V to +/-2.5V Low Noise Power Supply

Sep 15th 2016
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

 

LT3090 Two-Terminal Current Source

Sep 15th 2016
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

 

LT3090 500mA LED Driver with Grounded LED Tab (Heatsink)

Sep 15th 2016
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

 

LT3065 LED Driver/Current Source

Sep 15th 2016
The LT®3065 Series are micropower, low noise, low dropout voltage (LDO) linear regulators that operate over a 1.8V to 45V input voltage range. The devices supply 500mA of output current with a typical dropout voltage of 300mV. A single external capacitor provides programmable low noise reference performance and output ...

 

LT3085 Low Voltage, High Current Adjustable High Efficiency Regulator

Sep 15th 2016
The LT3085 is a 500mA low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Designed as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

 

LT3085 Low Dropout Voltage LED Driver

Sep 15th 2016
The LT3085 is a 500mA low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Designed as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

 

LT3085 Adjustable High Efficiency Regulator

Sep 15th 2016
The LT3085 is a 500mA low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Designed as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

 

NXP (Freescale) QorIQ LS1088A-RDB

Apr 25th 2016
The QorIQ LS1088A reference design board (LS1088A-RDB) is designed to exercise most capabilities of the LS1088A device; with up to eight ARM® Cortex®-A53 cores with the advanced, high-performance data-path and network peripheral interfaces required for wireless access points, networking infrastructure, ...

 

NXP (Freescale) QorIQ T1023RDB

Apr 25th 2016
The QorIQ T1023 Reference Design Board (T1023RDB) is a high-performance evaluation, development and test platform supporting the QorIQ T1023 communications processor. The board will support the evaluation and development of the dual core T1023 and the single core T1013 communications processors built on Power ...

 

LT3089 Load Sharing Without Ballast Resistors

Feb 1st 2016
The LT®3089 is an 800mA low dropout linear regulator designed for rugged industrial applications. Key features of the IC are the extended safe operating area (SOA), output current monitor, temperature monitor and programmable current limit. The LT3089 can be paralleled for higher output current or heat spreading. The device ...

 

LT3089 Load Current Sharing Without Ballasting

Feb 1st 2016
The LT®3089 is an 800mA low dropout linear regulator designed for rugged industrial applications. Key features of the IC are the extended safe operating area (SOA), output current monitor, temperature monitor and programmable current limit. The LT3089 can be paralleled for higher output current or heat spreading. The device ...

 

LTC6268-10 Oscilloscope Differential Probe

Dec 1st 2015
The LTC6268-10 is a single 4GHz FETinput operational amplifier with extremely low input bias current and low input capacitance. It also features low input-referred current noise and voltage noise making it an ideal choice for high speed transimpedance amplifiers, and high-impedance sensor amplifiers. It is a decompensated op ...

 

Stratix V Advanced System Development Board

Oct 22nd 2015
The Stratix® V Advanced Systems Development Kit is a complete systems design environment that includes both the hardware and software needed to begin architecture development and system design using Stratix V FPGAs. The PCI Express® (PCIe®)-based form-factor board combined with a one-year license for the ...

 

Terasic DE0-Nano-SoC Kit / Atlas-SoC Kit

Oct 5th 2015
The DE0-Nano-SoC Development Kit presents a robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability ...

 

Altera Arria 10 SoC Development Kit

Oct 5th 2015
The Altera® Arria® 10 SoC Development Kit offers a quick and simple approach for developing custom ARM® processor-based SoC designs. Design productivity is one of the driving philosophies of the Arria 10 SoC architecture. The Arria 10 SoCs offers full software compatibility with previous generation ...

 

MAX 10 NEEK Development Kit

Oct 5th 2015
The MAX 10 NEEK from Terasic is a full featured embedded evaluation kit based upon the MAX10 family of Altera FPGAs. It offers a comprehensive design environment with everything embedded developers need to create a processing based system. The MAX 10 NEEK delivers an integrated platform that includes hardware, design tools, ...

 

LTC3026-1 1.2V Output Voltage from 1.5V Input Supply

Sep 29th 2015
The LTC®3026-1 is a very low dropout (VLDO™) linear regulator that can operate at input voltages down to 1.14V. The device is capable of supplying 1.5A of output current with a typical dropout voltage of only 100mV. Output current comes directly from the input supply to maximize efficiency. ...

 

NXP (Freescale) QorIQ LS1043A-RDB

Sep 28th 2015
The QorIQ LS1043A reference design board (LS1043A-RDB) is designed to exercise most capabilities of the LS1043A device; NXP’s first quad-core, 64-bit ARM®-based processor for embedded networking and industrial infrastructure.     Rail / Function  Part Number General ...

 

NXP / Freescale Processor Solutions

Sep 22nd 2015
Linear Technology has worked closely with NXP (Freescale) and Strategic NXP (Freescale) Partners to provide you with approved and tested solutions for your processor based systems. Below you will find a host of useful tools that will allow you to select approved solutions for NXP. Linear Technology highly recommends ...

 

LT3091 Parallel Linear Regulators For -10V to -3Vin, -2.5Vout@3A

Aug 28th 2015
The LT®3091 is a 1.5A, low dropout negative linear regulator that is easily paralleled to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

 

LT3091 -10V to -3Vin, -2.5Vout@1.5A Negative Output Linear Regulator

Aug 28th 2015
The LT®3091 is a 1.5A, low dropout negative linear regulator that is easily paralleled to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

 

LT3091 Floating 3-Terminal Regulator (for Arbitrarily High Voltage Applications)

Aug 28th 2015
The LT®3091 is a 1.5A, low dropout negative linear regulator that is easily paralleled to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

 

Altera Arria 10 FPGA Development Kit

Jul 17th 2015
The LTC3877 + LTC3874 are used to provide power for the Core Rail by taking advantage of the 6-bit parallel VID that interfaces with the 20-nm Arria 10’s SmartVID to reduce the FPGA’s static and dynamic power consumption, and Ultralow value and temperature compensated DCR load current sensing which maximizes ...

 

LTM4675 18A, 5V Output DC/DC μModule Regulator with Serial Interface/PMBus

Jul 15th 2015
The LTM®4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 70ms turn-on time. It features remote configurability and telemetry-monitoring of power management parameters over PMBus— an open standard I2C-based digital interface protocol . The LTM4675 is comprised of fast analog ...

 

LT3088 Wide Safe Operating Area Supply Linear Regulator, 1.5Vout @ 800mA

Jun 17th 2015
The LT®3088 is an 800mA low dropout linear regulator designed for rugged industrial applications. A key feature of the IC is the extended safe operating area (SOA). The LT3088 can be paralleled for higher output current or heat spreading. The device withstands reverse input and reverse output-to-input voltages without ...

 

LT3088 3.3Vout @ 1.6A Linear Regulator

Jun 17th 2015
The LT®3088 is an 800mA low dropout linear regulator designed for rugged industrial applications. A key feature of the IC is the extended safe operating area (SOA). The LT3088 can be paralleled for higher output current or heat spreading. The device withstands reverse input and reverse output-to-input voltages without ...

 

LTC2956 Wake-Up Timer with Pushbutton Control

Mar 19th 2015
The LTC®2956 is a micropower, wide input voltage range, configurable wake-up timer with pushbutton control. It periodically wakes up and turns on a connected system to perform tasks like monitoring temperature or capturing images. After completing the task, the LTC2956 turns the system off to conserve power. ...

 

LT3042 5V VIN to 3V VOUT with 0.8μVRMS Integrated Noise

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce ...

 

LT3042 Ultralow Noise Higher Current Regulator with External PNP

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce ...

 

Paralleling Multiple LT3042s for Higher Output Current

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce ...

 

LT3042 Ultralow Noise 5Vin to 2Vout Higher Current (1A) Regulator with External NPN

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce ...

 

LT3042 5Vin to 3.3Vout @ 400mA Using Parallel Devices

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce ...

 

LT3071 1.2V To 0.9V, 5A Regulator

Feb 24th 2015
The LT3071 is a low voltage, UltraFast™ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage of 85mV. A 0.01μF reference bypass capacitor decreases output voltage noise to 25μVRMS. The LT3071’s high bandwidth permits the use of low ESR ceramic ...

 

LT3070 Triple Output Supply Providing 1V, 8A and 1.8V, 5A and 1.5V, 3A

Feb 24th 2015
The LT3070 is a low voltage, UltraFast™ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage of 85mV. A 0.01μF reference bypass capacitor decreases output voltage noise to 25μVRMS. The LT3070’s high bandwidth permits the use of low ESR ceramic ...

 

LT3070 1.5V to 1.2V 5A Linear Regulator

Feb 24th 2015
The LT3070 is a low voltage, UltraFast™ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage of 85mV. A 0.01μF reference bypass capacitor decreases output voltage noise to 25μVRMS. The LT3070’s high bandwidth permits the use of low ESR ceramic ...

 

Xilinx Zynq Networking Platform

Oct 30th 2014
HiTech Global's HTG-Z100, populated with the Xilinx Zynq XC7Z100, is an ideal platform for applications requiring embedded processing power, high-speed networking interfaces, and high-performance Xilinx Zynq Networking Platform     Rail / Function  Part Number General Description ...

 

Xilinx Virtex-7 10G/40G/100G Optical Interface FPGA Platform

Oct 30th 2014
HiTech Global's HTG707, populated with the Xilinx Virtex-7 X485T, X690T, or V2000T FPGA, is a development platform that delivers the most fundamental functional blocks required for building 10G/40G/100G subsystems.   Rail / Function  Part Number General Description of Part 1V: VCC_CORE   LTM4620 Dual ...

 

Xilinx Tested Power Solution for the Kintex UltraScale MGTs (Multi-Gigabit Transceivers)

Oct 30th 2014
Description With only 3.16mV (max) of output peak-to-peak ripple, Linear Technology’s DC2340A board plugs into the Xilinx Kintex UltraScale FPGA KCU1250 Characterization Kit.   Key Features Compact and easy to implement design using DC/DC uModule Regulators with integrated inductors and MOSFETs. PMBus ...

 

Xilinx Virtex™ -7 High-End Networking Card With Dual CXP Ports

Oct 30th 2014
HiTech Global's HTG-V7-PCIE-CXP board powered by Xilinx Virtex-7 V2000T, V585, or X690T, the HTG-710 is ideal for High-End networking applications requiring multi port data transfer above 100Gbps. This board is also ideal for ASIC/SOC prototyping, high-performance computing, high-end image processing, PCI Express Gen 2 ...

 

Xilinx Virtex 7 PCI Express Gen 3 /100Gig Networking Card

Oct 30th 2014
HiTech Global's HTG-V7-G3PCIE board powered by Xilinx Virtex-7 X415T, X485T, X550T, or X690T, the HTG-703 board is ideal for high performance FPGA development requiring access to 10G/40G/100G optical peripherals, high speed expansion connectors, large density memory, and high bandwidth PC interface.The HTG-703 is supported ...

 

Xilinx Virtex-7 V2000T PCI Express Development Board

Oct 30th 2014
HiTech Global's HTG700, populated with the Xilinx Virtex-7 V2000T, V585, or X690T is ideal for ASIC/SOC prototyping, high-performance computing, high-end image processing, PCI Express Gen 2 & 3 development, general purpose FPGA development, and/or applications requiring high speed serial transceivers (up to 12.5Gbps). Linear ...

 

Xilinx Kintex®-7 PCI Express Development Board

Oct 17th 2014
HiTech Global's HTG-K700 board is populated with the Xilinx Kintex-7 K325T or K410T FPGA, and is supported by 8-lane PCI Express Gen2 (hard)/Gen 3 (soft), FPGA Mezzanine Connector (FMC) and DDR3 SODIMM. .   Rail / Function  Part Number General Description of Part 1.0V: Vcc_Core (FPGA ...

 

Xilinx FPGA Solutions

Oct 17th 2014
 Development Kits Linear Technology has worked closely with Xilinx and Strategic Xilinx Partners to develop proven solutions for Xilinx based systems. Below you will find a host of useful tools that will facilitate your design efforts. Linear Technology highly recommends that prior to finalizing your design that you contact ...

 

Altera Cyclone IV GX FPGA Development Kit

Sep 30th 2014
Altera® Cyclone® IV GX FPGA Development Kit provides a comprehensive, best-in-class design environment to quickly begin developing low-cost and low-power FPGA system-level designs. This kit helps to shorten your product’s development cycle so that you can meet your product’s time to market and production ...

 

LT3012 5V Supply with Shutdown

Sep 3rd 2014
The LT3012 is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage of 400mV. Designed for use in battery-powered or high voltage systems, the low quiescent current (40µA operating and 1µA in shutdown) makes the LT3012 an ideal ...

 

LT1965 3.3V to 2.5V Regulator

Sep 3rd 2014
The LT®1965 series are low noise, low dropout linear regulators. The devices supply 1.1A of output current with a 310mV typical dropout voltage. Operating quiescent current is 500μA for the adjustable version, reducing to <1μA in shutdown. Quiescent current is well controlled; it does not rise in dropout as with ...

 

LT3012B 5V Low Dropout μPower Supply

Aug 6th 2014
The LT3012B is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage of 400mV. Designed for use in battery-powered or high voltage systems, the low quiescent current (40µA operating) makes the LT3012B an ideal choice. Quiescent current ...

 

LT3013B 5V Low Dropout μPower Supply with Power Good

Aug 6th 2014
The LT3013B is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage of 400mV. Designed for use in battery-powered or high voltage systems, the low quiescent current (65µA operating) makes the LT3013B an ideal choice. Quiescent current ...

 

LTC3026 Using a Single Boost Converter to Drive Multiple Linear Regulators

Aug 5th 2014
The LTC3026 is a very low dropout (VLDO™) linear regulator that can operate at input voltages down to 1.14V. The device is capable of supplying 1.5A of output current with a typical dropout voltage of only 100mV. To allow operation at low input voltages the LTC3026 includes a boost converter that provides the necessary ...

 

LTC3035/LTC3025 Dual LDO Output (1.8V, 1.5V) from 2.5V Supply Rail

Aug 5th 2014
The LTC3035 is a micropower, VLDO (very low dropout) linear regulator which operates from input voltages as low as 1.7V. The device is capable of supplying 300mA of output current with a typical dropout voltage of only 45mV. To allow operation at low input voltages the LTC3035 includes a charge pump generator that provides ...

 

LTC2644 An Opto-Isolated, PWM Regulated 4mA to 20mA Process Controller

Aug 4th 2014
The LTC®2644 is a family of dual 12-, 10-, and 8-bit PWMto- voltage output DACs with an integrated high accuracy, low drift, 10ppm/°C reference in a 12-lead MSOP package. It has rail-to-rail output buffers and is guaranteed monotonic. ...

 

Altera Arria V SoC Development Kit and SoC Embedded Design Suite

Jun 20th 2014
The Altera® Arria® V SoC Development Kit offers a quick and simple approach to develop custom ARM® processor-based SoC designs. Altera’s midrange, transceiver-based Arria V FPGA fabric provides the highest bandwidth with the lowest total power for midrange applications such as: Remote radio ...

 

Terasic C5G Cyclone V GX Starter Kit

Jun 20th 2014
The Cyclone V Starter Kit presents a robust hardware design platform built around the Altera Cyclone V GX FPGA, which is optimized for the lowest cost and power requirement for transceiver applications with industry-leading programmable logic for ultimate design flexibility. With Cyclone V FPGAs, you can get the power, cost, ...

 

Arrow / Terasic SoCKit Development Kit

Jun 20th 2014
The SoCKit Development Kit presents a robust hardware design platform built around the Altera Cyclone V System-on-Chip (SoC) FPGA, which combines the latest Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired ...

 

Terasic DE1-SoC Development Kit

Jun 20th 2014
The DE1-SoC Development Kit presents a robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired ...

 

Terasic DE4 Development and Education Board

Jun 20th 2014
The DE4 Development Board provides the ideal hardware platform for system designs that demand high-performance, serial connectivity, and advanced memory interfacing. Developed specifically to address the rapidly evolving requirements in many end markets for greater bandwidth, improved jitter performance, and lower power consumption. ...

 

Terasic TR5-Lite Stratix V FPGA Development Kit

Jun 19th 2014
The TR5-Lite Stratix V FPGA Development Kit a slim form-factor PCIe board that features maximum power in a minimum size. Perfect for 1U chassis servers and other stringent environments, the TR5-Lite includes high speed SFP+ interfaces and high-bandwidth memory architecture for high performance computing, cloud systems, and ultra ...

 

Terasic TR5-F40W Stratix V GX FPGA Development Kit

Jun 19th 2014
The Terasic TR5-F40W Stratix V GX FPGA Development Kit provides the ideal hardware platform for developing high-performance and high-bandwidth application. With a standard-height, half-length form-factor package, the TR5-F40W is designed for the most demanding high-end applications, empowered with the top-of-the-line Altera ...

 

Altera Cyclone V SoC Development Kit and SoC Embedded Design Suite

Jun 18th 2014
The Altera® Cyclone® V SoC Development Kit offers a quick and simple approach to develop custom ARM®processor-based SOC designs accompanied by Altera’s low-power, low-cost Cyclone V FPGA fabric. This kit supports a wide range of functions, such as: Processor and FPGA prototyping and power measurement Industrial ...

 

Altera DSP Development Kit, Stratix V Edition

Jun 17th 2014
The DSP Development Kit, Stratix V Edition provides a complete design environment that includes all the hardware and software you need to begin developing DSP-intensive FPGA designs immediately. Linear Technology Components LTC3880 Dual output PolyPhase step-down DC/DC controller with digital power system ...

 

Altera Cyclone V GT FPGA Development Kit

Jun 17th 2014
The Altera® Cyclone® V GT FPGA Development Kit can be used to prototype Cyclone V GT FPGA or Cyclone V GX FPGA applications. It offers a quick and simple way to develop low-cost and low-power FPGA system-level designs and achieve rapid results. This kit supports a myriad of functionalities such as: FPGA ...

 

Altera Transceiver Signal Integrity Development Kit, Stratix V GT Edition

Jun 16th 2014
The Altera® Stratix® V GT Transceiver Signal Integrity (SI) Development Kit provides a platform for electrical compliance testing and interoperability analysis. The accessibility to multiple channels allows for real-world analysis as implemented in the system with transceiver channels available through SMA ...

 

Altera Arria V GX FPGA Development Kit

Jun 16th 2014
The Arria V GX FPGA development board provides a hardware platform for  developing and prototyping low-power, high-performance, and logic-intensive designs using Altera’s Arria V GX FPGA device. The board provides a wide range of  peripherals and memory interfaces to facilitate the development of Arria V GX FPGA ...

 

Altera DSP Development Kit, Cyclone III Edition

Jun 12th 2014
The DSP Development Kit, Cyclone III Edition delivers a complete DSP development environment for design engineers. The DSP Development Kit, Cyclone III Edition includes the Cyclone III development board, the Data Conversion HSMC, the DSP Builder development tool, Quartus II development software, MATLAB/Simulink ...

 

Altera Audio Video Development Kit, Stratix IV GX Edition

Jun 12th 2014
The Audio Video Development Kit, Stratix IV GX Edition, delivers a complete video and image processing development environment for design engineers. The kit facilitates the entire design process, from design conception through hardware implementation. This kit includes the Stratix IV EP4SGX230 FPGA development ...

 

Altera Cyclone IV GX Transceiver Starter Kit

Jun 12th 2014
The Altera Cyclone IV FPGA family extends the Cyclone FPGA series leadership in providing the market’s lowest cost, lowest power FPGAs, including a transceiver variant. Ideal for high-volume, cost-sensitive applications, Cyclone IV FPGAs enable you to meet increasing bandwidth requirements while lowering ...

 

Altera Arria V GX Starter Kit

Jun 12th 2014
The Altera Arria V GX Starter Kit provides a complete design environment that includes all the hardware and software you need to develop cost-sensitive FPGA applications immediately. The development kit is RoHS compliant. Linear Technology Components LTC3880 Dual output PolyPhase step-down DC/DC controller with ...

 

Altera Arria V GT FPGA Development Kit

Jun 12th 2014
The Altera Arria V GT FPGA Development Kit provides a complete design environment that includes all the hardware and software that you need to develop full FPGA designs and test them within a system environment. The development kit is RoHS compliant.   Linear Technology Components LTC3880 Dual output ...

 

Altera Transceiver Signal Integrity Kit, Stratix IV GX Edition

Jun 12th 2014
The Transceiver SI Development Kit, Stratix IV GX Edition enables a thorough evaluation of Stratix IV GX transceiver interoperability and serializer/deserializer (SERDES) signal integrity (SI) and performance from 600 Mbps to 8.5 Gbps. Linear Technology Components LTM4601 12 A DC/DC μModule with PLL, output ...

 

Terasic DE5-Net Stratix V Board

Jun 12th 2014
The DE5-Net Stratix V FPGA Development Kit is perfectly suited for extreme high powered needs including cloud computing, high frequency trading, and security networks. Featuring an ultra-high bandwidth memory architecture, low-latency SFP+ interfaces, expandable memory, and PCIe communication, the DE5-Net allows ...

 

Altera Stratix IV GX FPGA Development Kit

Jun 12th 2014
The Altera Stratix IV GX FPGA Development Kit delivers a complete system-level design environment that includes both the hardware and software needed to immediately begin developing FPGA designs. With this PCI-SIG-compliant board and a one-year license for Quartus II design software, you can develop and test PCI Express ...

 

Altera 100G Development Kit, Stratix V Edition

Jun 12th 2014
The Altera 100G Development Kit, Stratix V GX Edition enables a thoroughevaluation of 100G designs. It supports 10G/40G and 100G line interfaces through optical modules and the ability to verify a variety of high-speed protocols. Rail / Function  Part Number General Description of Part 0.9V: ...

 

Altera Transceiver Signal Integrity Kit, Stratix V GX Edition

Jun 12th 2014
The Altera Stratix V GX Transceiver Signal Integrity (SI) Development Kit provides a platform for electrical compliance testing and interoperability analysis. The accessibility to multiple channels allows for real-world analysis as implemented in the system with transceiver channels available through SMA and popular ...

 

Altera Stratix V GX FPGA Development Kit

Jun 11th 2014
The Altera® Stratix® V GX FPGA Development Kit provides a complete design environment that includes all the hardware and software you need to begin developing FPGA designs immediately. The development kit is RoHS compliant. You can use this development kit to do the following: Develop and test PCI Express® (PCIe®) designs ...

 

Altera Nios II Embedded Evaluation Kit, Cyclone III Edition

Jun 11th 2014
The Nios II Embedded Evaluation Kit, Cyclone III Edition makes evaluating Altera’s embedded solutions easier than ever. A dozen different processor systems targeting the low cost, low-power Cyclone III FPGA can be evaluated by simply using the LCD color touch panel to scroll through and load your demo of ...