1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - LCD/CCD/OLED Bias

Terasic DE10-Nano Kit

Sep 26th 2017
The Terasic DE10-Nano is a development kit based on an Intel Cyclone V SoC which combines the power of a Cyclone V FPGA with a dual-core ARM Cortex-A9 processor. Analog Devices offers many plug-in boards that let you extend the functionality of the kit. Whether you want to measure real-world phenomena such as toxic gases or ...

Circuit LTpowerPlanner 

 

LT3463 Dual Output ±20V Converter

Feb 1st 2016
The LT3463/LT3463A are dual micropower DC/DC converters with internal Schottky diodes in a 10-lead 3mm x 3mm DFN package. Negative and positive LT3463 converters have a 250mA current limit. The LT3463A positive converter also has a 250mA limit, while the negative converter has a 400mA limit. Both devices have an input voltage ...

Circuit 

 

LT1617 ±20V Dual Output Converter with Load Disconnect

Feb 1st 2016
The LT®1617/LT1617-1 are micropower inverting DC/DC converters in a 5-lead SOT-23 package. The LT1617 is designed for higher power systems with a 350mA current limit and an input voltage range of 1.2V to 15V, whereas the LT1617-1 is intended for lower power and single-cell applications with a 100mA ...

Circuit 

 

Terasic DE0-Nano-SoC Kit / Atlas-SoC Kit

Oct 5th 2015
The DE0-Nano-SoC Development Kit presents a robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability ...

Circuit 

 

LT1618 USB to 12V Boost Converter (with Selectable 100mA/500mA Input Current Limit)

Sep 12th 2014
The LT1618 step-up DC/DC converter combines a traditional voltage feedback loop and a unique current feedback loop to operate as a constant-current, constant-voltage source. This fixed frequency, current mode switcher operates from a wide input voltage range of 1.6V to 18V, and the high switching frequency of 1.4MHz permits ...

Circuit LTspice 

 

LT3471 OLED Driver

Sep 11th 2014
The LT3471 dual switching regulator combines two 42V, 1.3A switches with error amplifiers that can sense to ground providing boost and inverting capability. The low VCESAT bipolar switches enable the device to deliver high current outputs in a small footprint. The LT3471 switches at 1.2MHz, allowing the use of tiny, low cost ...

Circuit LTspice 

 

5Vin to 12V at 300mA BOOST Converter

Sep 11th 2014
The LT®3467/LT3467A switching regulators combine a 42V, 1.1A switch with a soft-start function. Pin compatible with the LT1930, its low VCESAT bipolar switch enables the device to deliver high current outputs in a small footprint. The LT3467 switches at 1.3MHz, allowing the use of tiny, low cost and low height inductors ...

Circuit LTspice 

 

LT1617 1-Cell to –9V Inverting Converter

Sep 11th 2014
The LT®1617/LT1617-1 are micropower inverting DC/DC converters in a 5-lead SOT-23 package. The LT1617 is designed for higher power systems with a 350mA current limit and an input voltage range of 1.2V to 15V, whereas the LT1617-1 is intended for lower power and single-cell applications with a 100mA current limit and an extended ...

Circuit LTspice 

 

LT1613 5V to 12V Boost Converter

Sep 10th 2014
The LT®1613 is the industry’s first 5-lead SOT-23 current mode DC/DC converter. Intended for small, low power applications, it operates from an input voltage as low as 1.1V and switches at 1.4MHz, allowing the use of tiny, low cost capacitors and inductors 2mm or less in height. Its small size and high switching frequency ...

Circuit LTspice 

 

LT1308A 5V to 12V Boost Converter

Sep 5th 2014
The LT1308A/LT1308B are micropower, fixed frequency step-up DC/DC converters that operate over a 1V to 10V input voltage range. They are improved versions of the LT1308 and are recommended for use in new designs. The LT1308A features automatic shifting to power saving Burst Mode operation at light loads and consumes just 140µA ...

Circuit LTspice 

 

LT3495 OLED Power Supply from One Li-Ion Cell

Aug 7th 2014
The LT®3495/LT3495B/LT3495-1/LT3495B-1 are low noise boost converters with integrated power switch, feedback resistor and output disconnect circuitry. The parts control power delivery by varying both the peak inductor current and switch off-time. This novel* control scheme results in low output voltage ripple as well as ...

Circuit LTspice 

 

LT1931 2.2MHz, 5V to –5V Inverting Converter

Aug 6th 2014
The LT1931/LT1931A operate in a dual inductor inverting topology that filters both the input side and output side current. Very low output voltage ripple approaching 1mVP-P can be achieved when ceramic output capacitors are used. Fixed frequency switching ensures a clean output free from low frequency noise typically present ...

Circuit LTspice 

 

LT1931 5V to –5V, 350mA Inverting DC/DC Converter

Aug 6th 2014
The LT1931/LT1931A operate in a dual inductor inverting topology that filters both the input side and output side current. Very low output voltage ripple approaching 1mVP-P can be achieved when ceramic output capacitors are used. Fixed frequency switching ensures a clean output free from low frequency noise typically present ...

Circuit LTspice 

 

Altera DSP Development Kit, Cyclone III Edition

Jun 12th 2014
The DSP Development Kit, Cyclone III Edition delivers a complete DSP development environment for design engineers. The DSP Development Kit, Cyclone III Edition includes the Cyclone III development board, the Data Conversion HSMC, the DSP Builder development tool, Quartus II development software, MATLAB/Simulink ...

Circuit 

 

Altera Nios II Embedded Evaluation Kit, Cyclone III Edition

Jun 11th 2014
The Nios II Embedded Evaluation Kit, Cyclone III Edition makes evaluating Altera’s embedded solutions easier than ever. A dozen different processor systems targeting the low cost, low-power Cyclone III FPGA can be evaluated by simply using the LCD color touch panel to scroll through and load your demo of ...

Circuit 

 

Altera Embedded Systems Development Kit, Cyclone III Edition

Jun 10th 2014
The Altera Embedded System Development Kit, Cyclone III Edition is a complete development platform for prototyping embedded systems on Altera’s low-cost, low-power FPGAs. As part of this development kit, you’ll find everything you need; hardware, example processor systems, software applications, FPGA ...

Circuit 

 

Altera Cyclone III FPGA Development Kit

Jun 10th 2014
The Altera Cyclone III FPGA Development Kit combines the largest density low-cost, low-power FPGA available with a robust set of memories and user interfaces. Inside this development kit, you’ll find everything you need to begin Cyclone III FPGA development.   Linear Technology Components LTM4601 ...

Circuit 

 

LT3579 500kHz SEPIC Converter Generates 3.3V from a 3V to 33V Input

Apr 28th 2010
The LT®3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch that can be tied together for a total current limit of 6A. ...

Circuit 

 

LT3579 2MHz, Boost Converter with Output Disconnect Generates a 5V Output from 2.8V to 4.2V Input

Apr 28th 2010
The LT®3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch that can be tied together for a total current limit of 6A. ...

Circuit 

 

LT3579 1MHz, 5V to ±12V Converter

Apr 28th 2010
The LT®3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch that can be tied together for a total current limit of 6A. ...

Circuit 

 

LT3579 1.2MHz, 5V to -12V Inverting Converter

Apr 28th 2010
The LT®3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch that can be tied together for a total current limit of 6A. ...

Circuit 

 

LT3579 1MHz SEPIC Converter Generates a 12V Output from a 9V to 16V Input

Apr 28th 2010
The LT®3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch that can be tied together for a total current limit of 6A. ...

Circuit LTspice 

 

LT3579 1MHz, 2-Phase Converter Generates a 24V Output from a 8V to 16V Input and Uses Small Components

Apr 28th 2010
The LT®3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch that can be tied together for a total current limit of 6A. ...

Circuit 

 

LT3579 VFD (Vacuum Flourescent Display) Power Supply Switches at 1MHz

Apr 28th 2010
The LT®3579 is a PWM DC/DC converter with built-in fault protection features to aid in protecting against output shorts, input/output overvoltage, and overtemperature conditions. The part consists of a 42V master switch, and a 42V slave switch that can be tied together for a total current limit of 6A. ...

Circuit 

 

2.7V to 4.2V to -5V at 90mA and 4.6V at 100mA AMOLED Power Supply

May 4th 2009
LT3582 are dual DC/DC converters with positive and negative outputs. The positive output voltage can be set between 3.2V and 12.775V in 25mV steps. The negative output voltage can be set between –1.2V and –13.95V in –50mV steps. Optional I2C Programming. ...

Circuit 

 

Complete Power Solution For Portable Cameras

Aug 18th 2008
The LT3587 and LT3586 can combine to provide all required supplies for a digital camera: 3.3V@1A for system I/O, 1.8V@400mA for memory, 1.6V@400mA for core supply, 5V@800mA for audio/motor drive, positive (15V@50mA) and negative (-8V@100mA) CCD imager bias and white LED backlighting ...

Circuit 

 

2 AA Cells Provide CCD Positive and Negative Supply and Three White LED Backlight LED Driver

Aug 18th 2008
The LT3587 provides a complete biasing solution for CCD (12V@10mA, -8V@20mA) and LED backlighting from 2 AA cells ...

Circuit 

 

Driver For CCD Imager and an OLED Display Panel With Soft Start

Aug 18th 2008
The three outputs of the LT3587 can be configured to provide positive (+15V@50mA) and negative (-8V@100mA) bias for a CCD imager as well as 16V@20mA to bias an OLED display ...

Circuit 

 

Li-Ion Powered Supply for CCD Imager and Five White Backlight LEDs

Aug 18th 2008
The LT3587 provides a complete biasing solution for CCD (15V@50mA, -8V@100mA) and LED backlighting from a single Li-Ion cell ...

Circuit 

 

5 Output Regulator For TFT-LCD Panels: 5V@0.5A, 22V@20mA, -10V@20mA, 3.3V@0.5A, 8V@80mA

Jul 28th 2008
The LT3513 5-output adjustable switching regulator provides power for large TFT-LCD panels, providing Vlogic, Avdd, Von and Voff ...

Circuit LTspice 

 

Li-Ion to +5V@25mA, +16V@1mA, –13V@1mA TFT LCD Power Supply + 10 White LEDs

Feb 11th 2008
The LTC3524 is an integrated BIAS and white LED power converter solution for small/medium-sized polysilicon thin film transistor (TFT) liquid crystal (LCD) display panels. ...

Circuit 

 

LCD Bias (+5V, -7.5V, +12.5V) Plus 8 LED Power Supply

Feb 11th 2008
The LTC3524 is an integrated BIAS and white LED power converter solution for small/medium-sized polysilicon thin film transistor (TFT) liquid crystal (LCD) display panels. A 1.5MHz synchronous boost converter generates a programmable low noise, high efficiency 25mA TFT supply of up to 6.0V. Regulated, low ripple charge pumps ...

Circuit LTspice 

 

Li-Ion to Two White LEDs and OLED/LCD Bias

May 10th 2007
The LT3498 can provide both the positive bias voltage required for OLED or CCD bias as well as drive multiple white LEDs for display backlighting ...

Circuit 

 

+15V and -8V Low Vin (2.7V to 5V Vin) CCD Bias

May 3rd 2006
Postive (15V@40mA) and negative (-8V@80mA) bias voltages for a CCD imager can be generated from a 2.7V to 5V input supply by the LT3487 ...

Circuit 

 

+15V and -8V Boost and Inverting CCD Bias

May 3rd 2006
The dual boost/inverting LT3487 can provide both the positive (15V@45mA) and negative (-8V@90mA) bias voltages for a CCD imager ...

Circuit LTspice 

 

+24V and -16V LCD Bias

May 3rd 2006
Positive (24V@24mA) and negative (-16V@24mA) bias voltages for TFT LCD displays can be generated from a 3V to 6V input supply by the LT3487 ...

Circuit 

 

OLED Driver: 7V@350mA, -7V@250mA

Sep 23rd 2004
The dual boost/inverting LT3471 provides positive (7V@350mA) and negative (-7V@250mA) bias voltages for an OLED display from a single cell Li-Ion ...

Circuit LTspice 

 

LT3472 Li-Ion CCD Bias Supply (15V, -8V)

Sep 8th 2004
The LT3472 delivers up to –8V at 50mA and 15V at 20mA from a lithium-ion cell, providing bias for many popular CCD imagers ...

Circuit 

 

Li-Ion to 8 White LEDs and +/-15V TFT LCD Bias Supply

Mar 3rd 2004
The LT3466-1 provides a small, integrated solution for TFT LCD Bias (+/-15V @ 10mA) and backlighting (8 white LEDs) in a single package ...

Circuit 

 

Li-Ion Powered Driver For 6 White LEDs and OLED Display

Mar 3rd 2004
The LT3466-1 integrates a high voltage boost converter for OLED Bias (16V@30mA) with a high performance white LED driver ...

Circuit 

 

Li-Ion to 10 White LEDs and LCD Bias (+/-8V) with Output Disconnect

Mar 3rd 2004
With two small external switched capacitor networks, the LT3466-1 can provide both positive and negative bias voltages (+/- 8V @ 10mA) for an LCD display as well as driving 10 white LEDs ...

Circuit 

 

Li-Ion Powered Driver For 6 White LEDs and OLED With Output Disconnect

Mar 3rd 2004
The addition of an external transistor adds output disconnect to the LT3466-1 boost converter ...

Circuit 

 

5.1V, –15V, 15V Triple Output TFT-LCD Supply

Feb 18th 2004
From an input range of 1.5V to 4.6V, the LTC3450 generates all required bias voltages for a TFT LCD display: Avdd (5.1V at 10mA), VGH (15V at 500uA) and VGL (-15V at 500uA) ...

Circuit 

 

5.1V, –10V, 15V Triple Output TFT-LCD Supply

Feb 18th 2004
From an input range of 1.5V to 4.6V, the LTC3450 generates all required bias voltages for a TFT LCD display: Avdd (5.1V at 10mA), VGH (15V at 500uA) and VGL (-10V at 500uA) ...

Circuit 

 

5.1V, 15V, -5V Triple Output TFT-LCD Supply

Feb 18th 2004
From an input range of 1.5V to 4.6V, the LTC3450 generates all required bias voltages for a TFT LCD display: Avdd (5.1V at 10mA), VGH (15V at 500uA) and VGL (-5V at 500uA) ...

Circuit 

 

CCD Bias Supply (15V, -8V)

Dec 5th 2003
From 2.7V to 5V input, the LT3463 generate the positive (15V@10mA) and negative (-8V@50mA) bias voltages required for CCD imaging sensors ...

Circuit 

 

Quad Output TFT-LCD Power Supply: 12.2V@500mA, 3.3V@2A, 35V@30mA, -5.5V@50mA

Sep 30th 2003
The LT1943 integrates 4 high efficiency switching regulators to provide 4 high power outputs for biasing TFT-LCD displays: 12.2V@500mA, 3.3V@2A, 35V@30mA, -5.5V@50mA ...

Circuit 

 

LT1945 Dual Output (+12V@20mA, -20V@10mA) Converter

Sep 20th 2001
From a 2.7V to 5V input, the LT1945 dual boost/inverting regulator generates both positive (12V@20mA) and negative (-20V@10mA) bias voltages for TFT LCD displays ...

Circuit LTspice 

 

TFT-LCD Bias Generator: 12V, 20V, -6V Output

Apr 26th 2001
With a small external charge pump network, the LT1947 produces all three required bias voltages for TFT-LCD displays: 12V@120mA, 20V@10mA and -6V@20mA ...

Circuit 

 

Four Output (-6.5V@500uA, 20V@500uA, 10V@2mA, 5 LED) Supply For Color LCD Displays

Apr 26th 2001
From a 2.7V to 4.2V input, the LT1944 can generate 3 required bias voltages (-6.5V@500uA, 20V@500uA, 10V@2mA) and drive a string of 5 white LEDs for backlighting ...

Circuit 

 

TFT-LCD Bias Generator: 10V, 24V, -6V Output

Apr 26th 2001
With a small external charge pump network, the LT1947 produces all three required bias voltages for TFT-LCD displays: 10V@150mA, 24V@10mA and -6V@10mA ...

Circuit 

 

Triple Output Power Supply (5V, 15V, -10V) for LCD Displays

Apr 26th 2001
From 2.7V to 4.2V, the LT1944-1 generates 3 supplies (5V@40mA, 15V@2.5mA, -10V@1mA) required to bias a small LCD display ...

Circuit 

 

LT6110 Wire Drop Compensation Circuit if V+ of LT6110 is <2V

Sep 27th 1999
The LT®6110 is a precision high side current sense with a current mode output, designed for controlling the output voltage of an adjustable power supply or voltage regulator. This can be used to compensate for drops in voltage at a remote load due to resistance in a wire, trace or cable. The LT6110 monitors load current ...

Circuit 

 

TFT Bias (5V@40mA, 10V@2mA, -10V@2mA) and White LED Backlight Supply From Single Li-Ion Cell

May 25th 1999
The LT1942 is a highly integrated quad switching regulator designed to provide all necessary power supply functions for TFT displays, including the white LED backlight driver. The TFT supply output voltages are independently set, unlike charge pump solutions which have many limitations. ...

Circuit