Solutions Search - IO-Link Transceivers
DC2227A - LT3669-2 Demo Board | I/O Link with 18V to 36V Input to 4V at 300mA and 3.3V at 150mA
Nov 7th 2014
Demonstration circuit 2227A is a complete IO-Link® device built using the LT®3669-2 to implement an IO-Link v1.1 physical interface (PHY). The IO-Link stack protocol runs on an Atmel ATmega microcontroller which connects to LT3669-2’s logic IO-signals to communicate with an IO-Link master via the CQ1 transceiver.
...
DC2228A - 8-Port IO-Link Master Reference Design. Includes LTC2874, LT4275A, IO-Link v1.1 Protocol Stack and Control Tool. Optionally powered by DC1814A-D PoE supply.
Nov 6th 2014
IO-Link®, the new bi-directional, digital, point-to-point communication standard (IEC 61131-9) offers a standardized mapping of advanced sensor and actuator features into the automation tool environment. This technology leverages small but powerful microprocessors being incorporated into sensors and actuators to improve ...
IO-Link Transceiver Includes Integrated Step-Down Regulator & LDO
Jun 30th 2014
MILPITAS, CA - June 30, 2014 - The LT3669 is an IO-Link PHY compatible
(COM1/COM2/COM3) industrial transceiver that includes a high
efficiency step-down regulator and a low dropout linear regulator.
The device offers cable interface protection to ±60V. Wake-up
detect functionality as well as a programmable power-on reset timer
are ...
DC1733A-B - LT3669-2 Demo Board | 7.5V to 40V input with Vout 1 being 5V at 300mA and Vout 2 (LDO) being 3.3V at 150mA
Jun 18th 2014
Demonstration circuit 1733A is an industrial transceiver with integrated step-down regulator and LDO featuring the LT®3669. The board operates from 7.5V to 40V when JP7 is set to L+. When the JP7 is set to RES, the minimum input voltage is 16.5V. The board withstands transients up to 60V. The step-down regulator output is ...
DC1733A-A - LT3669-1 Demo Board | 7.5V to 40V input with Vout 1 being 5V at 100mA and Vout 2 (LDO) being 3.3V at 100mA
Jun 18th 2014
Demonstration circuit 1733A is an industrial transceiver with integrated step-down regulator and LDO featuring the LT®3669. The board operates from 7.5V to 40V when JP7 is set to L+. When the JP7 is set to RES, the minimum input voltage is 16.5V. The board withstands transients up to 60V. The step-down regulator output is ...
Safely Light Miniature Incandescent Lamps using LTC2874
Jan 17th 2014
Introduction
Incandescent light bulbs, described as "heaters that give off a little light" [1], are the target of governments worldwide due to their inherent inefficiency. Higher wattage lamps may be doomed by evolving efficiency standards, but their miniature cousins might still have a bright future in industrial settings ...
Quad PHY Interface Enables Rugged Multiport IO-Link Masters
Dec 11th 2013
MILPITAS, CA – December 11, 2013 – Linear Technology Corporation
introduces the LTC2874, an IO-Link master IC, combining a power and
communications interface to four remote IO-Link devices
(slaves). A rugged interface and rich feature set make the
LTC2874 ideal for larger systems implementing IO-Link (IEC61131-9)
in ...
DC1880A - LTC2874 Demo Board | Quad IO-Link Master Hot Swap Power Controller and PHY (req. DC2026)
Nov 18th 2013
Demonstration circuit 1880A showcases the LTC®2874, a quad Hot Swap™ controller and PHY suitable for IO-Link® master and other applications. DC1880A operates from an external supply VDD and utilizes the DC590 USB serial controller board to communicate with the LTC2874 using SPI protocol.
...
Loading