1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - Extended Temperature (H & MP) Linear Regulators

Hybrid Wide Dimming Ratio Linear LED Current Controller Using LT8614 & LT3083/LT6015

Tom Mosteller - Field Applications Engineer Oct 17th 2016
Many applications for LED illumination require wide dimming ratios. This can be accomplished simply via an adjustable current source as show below.  The current source can be varied by a number of different means, and a large LED current range can be achieved. The primary problem with this technique is that the power dissipation ...

Blog Post Circuit LTspice 

 

LT3090 5V to +/-2.5V Low Noise Power Supply

Sep 15th 2016
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

Circuit 

 

LT3090 Two-Terminal Current Source

Sep 15th 2016
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

Circuit 

 

LT3090 500mA LED Driver with Grounded LED Tab (Heatsink)

Sep 15th 2016
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

Circuit 

 

LT3065 LED Driver/Current Source

Sep 15th 2016
The LT®3065 Series are micropower, low noise, low dropout voltage (LDO) linear regulators that operate over a 1.8V to 45V input voltage range. The devices supply 500mA of output current with a typical dropout voltage of 300mV. A single external capacitor provides programmable low noise reference performance and output soft-start ...

Circuit 

 

LT3085 Low Voltage, High Current Adjustable High Efficiency Regulator

Sep 15th 2016
The LT3085 is a 500mA low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Designed as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

Circuit 

 

LT3085 Low Dropout Voltage LED Driver

Sep 15th 2016
The LT3085 is a 500mA low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Designed as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

Circuit 

 

LT3085 Adjustable High Efficiency Regulator

Sep 15th 2016
The LT3085 is a 500mA low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Designed as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

Circuit 

 

LTC6268-10 Oscilloscope Differential Probe

Dec 1st 2015
The LTC6268-10 is a single 4GHz FETinput operational amplifier with extremely low input bias current and low input capacitance. It also features low input-referred current noise and voltage noise making it an ideal choice for high speed transimpedance amplifiers, and high-impedance sensor amplifiers. It is a decompensated op ...

Circuit LTspice 

 

Stratix V Advanced System Development Board

Oct 22nd 2015
The Stratix® V Advanced Systems Development Kit is a complete systems design environment that includes both the hardware and software needed to begin architecture development and system design using Stratix V FPGAs. The PCI Express® (PCIe®)-based form-factor board combined with a one-year license for the ...

Circuit 

 

Altera Arria 10 SoC Development Kit

Oct 5th 2015
The Altera® Arria® 10 SoC Development Kit offers a quick and simple approach for developing custom ARM® processor-based SoC designs. Design productivity is one of the driving philosophies of the Arria 10 SoC architecture. The Arria 10 SoCs offers full software compatibility with previous generation ...

Circuit 

 

MAX 10 NEEK Development Kit

Oct 5th 2015
The MAX 10 NEEK from Terasic is a full featured embedded evaluation kit based upon the MAX10 family of Altera FPGAs. It offers a comprehensive design environment with everything embedded developers need to create a processing based system. The MAX 10 NEEK delivers an integrated platform that includes hardware, design tools, ...

Circuit 

 

NXP (Freescale) QorIQ LS1043A-RDB

Sep 28th 2015
The QorIQ LS1043A reference design board (LS1043A-RDB) is designed to exercise most capabilities of the LS1043A device; NXP’s first quad-core, 64-bit ARM®-based processor for embedded networking and industrial infrastructure.     Rail / Function  Part Number General ...

Circuit LTpowerPlanner 

 

NXP / Freescale Processor Solutions

Sep 22nd 2015
Linear Technology has worked closely with NXP (Freescale) and Strategic NXP (Freescale) Partners to provide you with approved and tested solutions for your processor based systems. Below you will find a host of useful tools that will allow you to select approved solutions for NXP. Linear Technology highly recommends that ...

Circuit 

 

LT3091 Parallel Linear Regulators For -10V to -3Vin, -2.5Vout@3A

Aug 28th 2015
The LT®3091 is a 1.5A, low dropout negative linear regulator that is easily paralleled to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision output, ...

Circuit 

 

LT3091 -10V to -3Vin, -2.5Vout@1.5A Negative Output Linear Regulator

Aug 28th 2015
The LT®3091 is a 1.5A, low dropout negative linear regulator that is easily paralleled to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision output, ...

Circuit 

 

LT3091 Floating 3-Terminal Regulator (for Arbitrarily High Voltage Applications)

Aug 28th 2015
The LT®3091 is a 1.5A, low dropout negative linear regulator that is easily paralleled to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision output, ...

Circuit 

 

Altera Arria 10 FPGA Development Kit

Jul 17th 2015
The LTC3877 + LTC3874 are used to provide power for the Core Rail by taking advantage of the 6-bit parallel VID that interfaces with the 20-nm Arria 10’s SmartVID to reduce the FPGA’s static and dynamic power consumption, and Ultralow value and temperature compensated DCR load current sensing which maximizes ...

Circuit 

 

LTM4675 18A, 5V Output DC/DC μModule Regulator with Serial Interface/PMBus

Jul 15th 2015
The LTM®4675 is a dual 9A or single 18A step-down μModule® (micromodule) DC/DC regulator with 70ms turn-on time. It features remote configurability and telemetry-monitoring of power management parameters over PMBus— an open standard I2C-based digital interface protocol . The LTM4675 is comprised of fast analog ...

Circuit 

 

LT3088 Wide Safe Operating Area Supply Linear Regulator, 1.5Vout @ 800mA

Jun 17th 2015
The LT®3088 is an 800mA low dropout linear regulator designed for rugged industrial applications. A key feature of the IC is the extended safe operating area (SOA). The LT3088 can be paralleled for higher output current or heat spreading. The device withstands reverse input and reverse output-to-input voltages without reverse ...

Circuit 

 

LT3088 3.3Vout @ 1.6A Linear Regulator

Jun 17th 2015
The LT®3088 is an 800mA low dropout linear regulator designed for rugged industrial applications. A key feature of the IC is the extended safe operating area (SOA). The LT3088 can be paralleled for higher output current or heat spreading. The device withstands reverse input and reverse output-to-input voltages without reverse ...

Circuit 

 

LTC2956 Wake-Up Timer with Pushbutton Control

Mar 19th 2015
The LTC®2956 is a micropower, wide input voltage range, configurable wake-up timer with pushbutton control. It periodically wakes up and turns on a connected system to perform tasks like monitoring temperature or capturing images. After completing the task, the LTC2956 turns the system off to conserve power. ...

Circuit 

 

LT3042 5V VIN to 3V VOUT with 0.8μVRMS Integrated Noise

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce noise, ...

Circuit 

 

LT3042 Ultralow Noise Higher Current Regulator with External PNP

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce noise, ...

Circuit 

 

Paralleling Multiple LT3042s for Higher Output Current

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce noise, ...

Circuit 

 

LT3042 Ultralow Noise 5Vin to 2Vout Higher Current (1A) Regulator with External NPN

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce noise, ...

Circuit 

 

LT3042 5Vin to 3.3Vout @ 400mA Using Parallel Devices

Mar 4th 2015
The LT®3042 is a high performance low dropout linear regulator featuring LTC’s ultralow noise and ultrahigh PSRR architecture for powering noise sensitive RF applications. Designed as a precision current reference followed by a high performance voltage buffer, the LT3042 can be easily paralleled to further reduce noise, ...

Circuit 

 

LT3071 1.2V To 0.9V, 5A Regulator

Feb 24th 2015
The LT3071 is a low voltage, UltraFast™ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage of 85mV. A 0.01μF reference bypass capacitor decreases output voltage noise to 25μVRMS. The LT3071’s high bandwidth permits the use of low ESR ceramic capacitors, ...

Circuit 

 

LT3070 Triple Output Supply Providing 1V, 8A and 1.8V, 5A and 1.5V, 3A

Feb 24th 2015
The LT3070 is a low voltage, UltraFast™ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage of 85mV. A 0.01μF reference bypass capacitor decreases output voltage noise to 25μVRMS. The LT3070’s high bandwidth permits the use of low ESR ceramic capacitors, ...

Circuit 

 

LT3070 1.5V to 1.2V 5A Linear Regulator

Feb 24th 2015
The LT3070 is a low voltage, UltraFast™ transient response linear regulator. The device supplies up to 5A of output current with a typical dropout voltage of 85mV. A 0.01μF reference bypass capacitor decreases output voltage noise to 25μVRMS. The LT3070’s high bandwidth permits the use of low ESR ceramic capacitors, ...

Circuit 

 

Xilinx Zynq Networking Platform

Oct 30th 2014
HiTech Global's HTG-Z100, populated with the Xilinx Zynq XC7Z100, is an ideal platform for applications requiring embedded processing power, high-speed networking interfaces, and high-performance Xilinx Zynq Networking Platform     Rail / Function  Part Number General Description ...

Circuit LTpowerPlanner 

 

Xilinx Virtex-7 10G/40G/100G Optical Interface FPGA Platform

Oct 30th 2014
HiTech Global's HTG707, populated with the Xilinx Virtex-7 X485T, X690T, or V2000T FPGA, is a development platform that delivers the most fundamental functional blocks required for building 10G/40G/100G subsystems.   Rail / Function  Part Number General Description of Part 1V: VCC_CORE   LTM4620 Dual ...

Circuit 

 

Xilinx Tested Power Solution for the Kintex UltraScale MGTs (Multi-Gigabit Transceivers)

Oct 30th 2014
Description With only 3.16mV (max) of output peak-to-peak ripple, Linear Technology’s DC2340A board plugs into the Xilinx Kintex UltraScale FPGA KCU1250 Characterization Kit.   Key Features Compact and easy to implement design using DC/DC uModule Regulators with integrated inductors and MOSFETs. PMBus ...

Circuit 

 

Xilinx Virtex™ -7 High-End Networking Card With Dual CXP Ports

Oct 30th 2014
HiTech Global's HTG-V7-PCIE-CXP board powered by Xilinx Virtex-7 V2000T, V585, or X690T, the HTG-710 is ideal for High-End networking applications requiring multi port data transfer above 100Gbps. This board is also ideal for ASIC/SOC prototyping, high-performance computing, high-end image processing, PCI Express Gen 2 ...

Circuit 

 

Xilinx Virtex 7 PCI Express Gen 3 /100Gig Networking Card

Oct 30th 2014
HiTech Global's HTG-V7-G3PCIE board powered by Xilinx Virtex-7 X415T, X485T, X550T, or X690T, the HTG-703 board is ideal for high performance FPGA development requiring access to 10G/40G/100G optical peripherals, high speed expansion connectors, large density memory, and high bandwidth PC interface.The HTG-703 is supported ...

Circuit 

 

Xilinx Virtex-7 V2000T PCI Express Development Board

Oct 30th 2014
HiTech Global's HTG700, populated with the Xilinx Virtex-7 V2000T, V585, or X690T is ideal for ASIC/SOC prototyping, high-performance computing, high-end image processing, PCI Express Gen 2 & 3 development, general purpose FPGA development, and/or applications requiring high speed serial transceivers (up to 12.5Gbps). Linear ...

Circuit 

 

Xilinx Kintex®-7 PCI Express Development Board

Oct 17th 2014
HiTech Global's HTG-K700 board is populated with the Xilinx Kintex-7 K325T or K410T FPGA, and is supported by 8-lane PCI Express Gen2 (hard)/Gen 3 (soft), FPGA Mezzanine Connector (FMC) and DDR3 SODIMM. .   Rail / Function  Part Number General Description of Part 1.0V: Vcc_Core (FPGA ...

Circuit 

 

Xilinx FPGA Solutions

Oct 17th 2014
Development Kits Linear Technology has worked closely with Xilinx and Strategic Xilinx Partners to develop proven solutions for Xilinx based systems. Below you will find a host of useful tools that will facilitate your design efforts. Linear Technology highly recommends that prior to finalizing your design that you contact ...

Circuit 

 

LT3012 5V Supply with Shutdown

Sep 3rd 2014
The LT3012 is a high voltage, micropower low dropout linear regulator. The device is capable of supplying 250mA of output current with a dropout voltage of 400mV. Designed for use in battery-powered or high voltage systems, the low quiescent current (40µA operating and 1µA in shutdown) makes the LT3012 an ideal choice. ...

Circuit LTspice 

 

LT1965 3.3V to 2.5V Regulator

Sep 3rd 2014
The LT®1965 series are low noise, low dropout linear regulators. The devices supply 1.1A of output current with a 310mV typical dropout voltage. Operating quiescent current is 500μA for the adjustable version, reducing to <1μA in shutdown. Quiescent current is well controlled; it does not rise in dropout as with ...

Circuit LTspice 

 

Arrow / Terasic SoCKit Development Kit

Jun 20th 2014
The SoCKit Development Kit presents a robust hardware design platform built around the Altera Cyclone V System-on-Chip (SoC) FPGA, which combines the latest Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired ...

Circuit 

 

Terasic DE1-SoC Development Kit

Jun 20th 2014
The DE1-SoC Development Kit presents a robust hardware design platform built around the Altera System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired ...

Circuit 

 

Terasic DE4 Development and Education Board

Jun 20th 2014
The DE4 Development Board provides the ideal hardware platform for system designs that demand high-performance, serial connectivity, and advanced memory interfacing. Developed specifically to address the rapidly evolving requirements in many end markets for greater bandwidth, improved jitter performance, and lower power consumption. ...

Circuit 

 

Altera Cyclone V GT FPGA Development Kit

Jun 17th 2014
The Altera® Cyclone® V GT FPGA Development Kit can be used to prototype Cyclone V GT FPGA or Cyclone V GX FPGA applications. It offers a quick and simple way to develop low-cost and low-power FPGA system-level designs and achieve rapid results. This kit supports a myriad of functionalities such as: FPGA ...

Circuit 

 

Altera Arria V GX FPGA Development Kit

Jun 16th 2014
The Arria V GX FPGA development board provides a hardware platform for  developing and prototyping low-power, high-performance, and logic-intensive designs using Altera’s Arria V GX FPGA device. The board provides a wide range of  peripherals and memory interfaces to facilitate the development of Arria V GX FPGA ...

Circuit 

 

Altera DSP Development Kit, Cyclone III Edition

Jun 12th 2014
The DSP Development Kit, Cyclone III Edition delivers a complete DSP development environment for design engineers. The DSP Development Kit, Cyclone III Edition includes the Cyclone III development board, the Data Conversion HSMC, the DSP Builder development tool, Quartus II development software, MATLAB/Simulink ...

Circuit 

 

Altera Audio Video Development Kit, Stratix IV GX Edition

Jun 12th 2014
The Audio Video Development Kit, Stratix IV GX Edition, delivers a complete video and image processing development environment for design engineers. The kit facilitates the entire design process, from design conception through hardware implementation. This kit includes the Stratix IV EP4SGX230 FPGA development ...

Circuit 

 

Altera Transceiver Signal Integrity Kit, Stratix IV GX Edition

Jun 12th 2014
The Transceiver SI Development Kit, Stratix IV GX Edition enables a thorough evaluation of Stratix IV GX transceiver interoperability and serializer/deserializer (SERDES) signal integrity (SI) and performance from 600 Mbps to 8.5 Gbps. Linear Technology Components LTM4601 12 A DC/DC μModule with PLL, output ...

Circuit 

 

Altera Stratix IV GX FPGA Development Kit

Jun 12th 2014
The Altera Stratix IV GX FPGA Development Kit delivers a complete system-level design environment that includes both the hardware and software needed to immediately begin developing FPGA designs. With this PCI-SIG-compliant board and a one-year license for Quartus II design software, you can develop and test PCI Express ...

Circuit 

 

Altera 100G Development Kit, Stratix V Edition

Jun 12th 2014
The Altera 100G Development Kit, Stratix V GX Edition enables a thoroughevaluation of 100G designs. It supports 10G/40G and 100G line interfaces through optical modules and the ability to verify a variety of high-speed protocols. Rail / Function  Part Number General Description of Part 0.9V: ...

Circuit 

 

Altera Stratix V GX FPGA Development Kit

Jun 11th 2014
The Altera® Stratix® V GX FPGA Development Kit provides a complete design environment that includes all the hardware and software you need to begin developing FPGA designs immediately. The development kit is RoHS compliant. You can use this development kit to do the following: Develop and test PCI Express® (PCIe®) designs ...

Circuit 

 

Altera Embedded Systems Development Kit, Cyclone III Edition

Jun 10th 2014
The Altera Embedded System Development Kit, Cyclone III Edition is a complete development platform for prototyping embedded systems on Altera’s low-cost, low-power FPGAs. As part of this development kit, you’ll find everything you need; hardware, example processor systems, software applications, FPGA ...

Circuit 

 

Altera Cyclone III LS FPGA Development Kit

Jun 10th 2014
The Altera Cyclone III LS FPGA Development Kit combines the largest density, low-power FPGA available with a complete suite of security features implemented at the silicon, software, and intellectual property (IP) levels. These security features provide passive and active protection of your IP from tampering, ...

Circuit 

 

Altera Cyclone III FPGA Development Kit

Jun 10th 2014
The Altera Cyclone III FPGA Development Kit combines the largest density low-cost, low-power FPGA available with a robust set of memories and user interfaces. Inside this development kit, you’ll find everything you need to begin Cyclone III FPGA development.   Linear Technology Components LTM4601 ...

Circuit 

 

Terasic DE2i-150 Cyclone IV Board

Jun 10th 2014
Combining the Intel Atom Processor and Altera Cyclone IV GX, the DE2i-150 FPGA Development Kit fuses together the world of high performance processing and unbelievably high configurability. Linked together through two high-speed PCIe lanes, the processor and FPGA have access to high-speed communication between ...

Circuit 

 

LT3090 Floating 3-Terminal Regulator (for Arbitrarily High Voltage Applications)

Sep 16th 2013
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

Circuit 

 

LT3090 Negative Output Linear Regulator -2.5Vout@600mA

Sep 16th 2013
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

Circuit 

 

LT3090 Paralleling Devices without Ballasting For Higher Output Currents

Sep 16th 2013
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

Circuit 

 

LT3083 Parallel Devices For Higher Output Current

Jan 27th 2011
The LT3083 is a 3A low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Architected as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

Circuit 

 

LT3083 1.5V to 0.9V at 3A Supply (Using 3.3V Vcontrol)

Jan 27th 2011
The LT3083 is a 3A low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Architected as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

Circuit 

 

LT3083 High Voltage Regulator

Jan 27th 2011
The LT3083 is a 3A low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Architected as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

Circuit 

 

LT3050-5: 5V Supply with 100mA Precision Current Limit, 10mA Imin

Sep 14th 2009
The LT3050 series are micro-power, low noise, low dropout voltage (LDO) linear regulators. The devices supply 100mA of output current with a dropout voltage of 340mV. A 10nF bypass capacitor reduces output noise to 30μVRMS in a 10Hz to 100kHz bandwidth and soft-starts the reference. The LT3050’s ±45V input voltage ...

Circuit LTspice 

 

LT3680/LT3083 Adjustable High Efficiency Regulator

Jul 31st 2007
The LT3083 is a 3A low dropout linear regulator that can be paralleled to increase output current or spread heat on surface mounted boards. Architected as a precision current source and voltage follower, this new regulator finds use in many applications requiring high current, adjustability to zero, and no heat sink. The device ...

Circuit 

 

LT3480/LT3090 Low Noise Single Inductor Positive-to-Negative Converter

Mar 6th 2007
The LT®3090 is a 600mA, low dropout negative linear regulator that is easily parallelable to increase output current or spread heat on surface mounted boards. Designed with a precision current reference followed by a high performance rail-to-rail voltage buffer, this regulator finds use in applications requiring precision ...

Circuit 

 

LT1129 5V Supply with Shutdown

Mar 19th 2003
The LT®1129/LT1129-3.3/LT1129-5 are micropower low dropout regulators with shutdown. The devices are capable of supplying 700mA of output current with a dropout voltage of 400mV at maximum output. Designed for use in battery-powered systems, the low quiescent current, 50μA operating and 16μA in shutdown, make them ...

Circuit LTspice 

 

LT1963A 3.3V to 2.5V Regulator

May 10th 2000
The LT®1963A series are low dropout regulators optimized for fast transient response. The devices are capable of supplying 1.5A of output current with a dropout voltage of 340mV. Operating quiescent current is 1mA, dropping to <1μA in shutdown. Quiescent current is well controlled; it does not rise in dropout as it ...

Circuit 

 

LT1763 3.3V Low Noise Regulator

Jul 15th 1999
The LT1763 series are micropower, low noise, low dropout regulators. The devices are capable of supplying 500mA of output current with a dropout voltage of 300mV. Designed for use in battery-powered systems, the low 30μA quiescent current makes them an ideal choice. Quiescent current is well controlled; it does not rise in ...

Circuit 

 

LT1761 5V Low Noise Regulator

Mar 2nd 1999
The LT®1761 series are micropower, low noise, low dropout regulators. With an external 0.01μF bypass capacitor, output noise drops to 20μVRMS over a 10Hz to 100kHz bandwidth. Designed for use in battery-powered systems, the low 20μA quiescent current makes them an ideal choice. In shutdown, quiescent current drops ...

Circuit 

 

Paralleling LT1763 Linear Regulators for Higher Output Current

Apr 26th 1996
The LT1763 series are micropower, low noise, low dropout regulators. The devices are capable of supplying 500mA of output current with a dropout voltage of 300mV. Designed for use in battery-powered systems, the low 30μA quiescent current makes them an ideal choice. Quiescent current is well controlled; it does not rise in ...

Circuit 

 

LT1175 Negative Low Dropout Regulator with Current Limit

Apr 28th 1995
The LT1175 is a negative micropower low dropout regulator. It features 45μA quiescent current, dropping to 10μA in shutdown. A new reference amplifier topology gives precision DC characteristics along with the ability to maintain good loop stability with an extremely wide range of output capacitors. Very low dropout voltage ...

Circuit LTspice 

 

LT1963A Paralleling of Regulators for Higher Output Current

Oct 6th 1994
The LT®1963A series are low dropout regulators optimized for fast transient response. The devices are capable of supplying 1.5A of output current with a dropout voltage of 340mV. Operating quiescent current is 1mA, dropping to <1μA in shutdown. Quiescent current is well controlled; it does not rise in dropout as it ...

Circuit 

 

LT1963A Adjustable Current Source

Oct 6th 1994
The LT®1963A series are low dropout regulators optimized for fast transient response. The devices are capable of supplying 1.5A of output current with a dropout voltage of 340mV. Operating quiescent current is 1mA, dropping to <1μA in shutdown. Quiescent current is well controlled; it does not rise in dropout as it ...

Circuit