1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - DC Regulator Solutions

DC2494A - LTM8063 Demo Board | 40V, 2A Step-Down μModule Regulator

Nov 16th 2017
Demonstration circuit 2494A is a 40V, 2A step-down μModule® regulator featuring the LTM®8063. The demo board is designed for 5V output from a 6.5V to 40V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The user adjustable features of the LTM8063 ...

Demo Board 

 

DC2407A - LT8650S Demo Board | Dual Channel 42V, 4A Synchronous Step-Down Silent Switcher 2

Nov 15th 2017
Demonstration circuit 2407A is a dual channel 42V, 4A synchronous step-down Silent Switcher® with 6.2μA quiescent current featuring the LT8650S. The LT8650S is the second-generation Silent Switcher that minimizes EMI and reduces PCB layout sensitivity. The demonstration circuit has two outputs: 5V and 3.3V. Each output ...

Demo Board LTspice 

 

DC1341B - LT3757EDD SEPIC Demo Board | 4.5V ≤ Vin ≤ 36V; Vout = 5V @ 3A

Nov 3rd 2017
Demonstration circuit 1341B features LT®3757A in a 300kHz SEPIC converter circuit, designed for a 5V at 3A output from a 4.5V to 36V input voltage range.   ...

Demo Board 

 

DC2548A - LT8672EMS Demo Board | VIN = -15V to 35V, Up to 5A Output

Oct 31st 2017
Demonstration circuit 2548A is an active rectifier with reverse protection featuring the LT®8672. The demo board is designed for 5A load current. The input voltage range of the LT8672 is –40V to +42V. Two clamping diodes, D1 and D2, are used on the board to protect the IC from overvoltage spikes at the input, thus ...

Demo Board 

 

DC2737A - LT8301ES5 Demo Board | No-Opto Isolated Flyback Converter, VIN = 10V to 32V, VOUT = 5V @ up to 700mA

Oct 31st 2017
Demonstration circuit 2737A is an isolated flyback converter featuring the LT®8301. The demo circuit outputs 5V from input 10V to 32V, with a nominal 24V. The output current capability increases with the input voltage. The standby input current of the demo circuit is less than 950μA (typical) at VIN = 24V.   ...

Demo Board 

 

DC2251 - LTM8065 Demo Board | 40VIN, 2.5A Silent Switcher μModule Regulator

Oct 23rd 2017
Demonstration circuit 2251A is a 40V, 3.5A peak, 2.5A continuous step-down μModule® regulator featuring the LTM®8065. The demo board is designed for 5V output from a 6V to 40V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The user adjustable features ...

Demo Board 

 

DC2234A - LT8711 Micropower Synchronous Sepic Converter

Oct 2nd 2017
Demonstration circuit 2234A is a synchronous sepic converter featuring the LT®8711 multitopology switching controller. The LT8711 is a current mode PWM DC/DC controller with a dual input LDO to optimize gate driver efficiency. Ultralow 15μA quiescent current in low noise Burst Mode® operation achieves high efficiency ...

Demo Board 

 

DC2456A - LTC3779EFE Demo Board | 16V ≤ VIN ≤ 120V, VOUT = 48V @ 10A at up to 99% Efficiency

Sep 10th 2017
Demonstration circuit 2456A is a high voltage, high efficiency synchronous buck-boost DC/DC converter with a 16V to 120V input voltage range. It can supply a 10A maximum load current with a 48V output. The demo board features the LTC®3779EFE controller. The constant frequency current mode architecture allows a phase-lockable ...

Demo Board 

 

DC2658A - LT8643S Demo Board | VIN = 5.8V to 42V with VOUT = 5V at 6A @ 2MHz

Aug 22nd 2017
Demonstration circuit 2658A is a 42V, 6A synchronous step-down second generation SILENT SWITCHER with spread spectrum frequency modulation featuring the LT®8643S. The demo board is designed for 5V output from a 5.8V to 42V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial ...

Demo Board 

 

DC1669B - LTM4627EV 15A Step‐Down μModule Regulator

Aug 18th 2017
Demonstration circuit 1669 features the LTM®4627EV μModule regulator, a high‐performance high efficiency step‐down regulator. The LTM4627EV has an operating input voltage range of 4.5V to 20V and is able to provide an output current of up to 15A. The output voltage is programmable from 0.6V to 5V and can be remotely ...

Demo Board 

 

DC2328A - LTM4651 Demo Board | EN55022B Compliant 58V, 24W Inverting-Output DC/DC μModule Regulator

Aug 11th 2017
Demonstration circuit 2328A is an inverting buck-boost converter with 12V to 34V input voltage, –24V output voltage and max 2A output current capability, which features the LTM®4651Y. The LTM4651 is an ultralow noise, 58V, 24W inverting-topology DC/DC µModule regulator. It is designed to meet the radiated emissions ...

Demo Board 

 

DC2628A - LT8362 Demo Board | VIN = 10V to 36V with VOUT= 48V at 280mA to 1000mA

Aug 8th 2017
Demo circuit 2628A features the LT®8362 in boost configuration. The converter is designed to convert a 10V to 36V source to 48V at 280mA to 1000mA, depending on input voltage, and with a switching frequency of 2MHz. Please refer to Figure 4 for load current versus input voltage.    ...

Demo Board LTspice 

 

DC2285A - LT8705AEUHF Demo Board | VIN = 36V to 75V, VOUT = 48V @18A

Aug 4th 2017
Demonstration circuit 2285A features two high power high performance buck-boost LT®8705A converters operating in master-slave configuration. The circuit can operate with input voltages above, below or equal to the output voltage. The demo board input range is 36V to 75V. The output is optimized for 48V at 18A, with the output ...

Demo Board 

 

DC2466A - LTC3246 Demo Board | Wide VIN Range Buck-Boost Charge Pump with Watchdog Timer

Aug 4th 2017
Demonstration circuit 2466A is a buck-boost 500mA charge pump with pin selectable output voltages and includes a watchdog timer featuring the LTC®3246EMSE. The LTC3246 operates with a wide input voltage range from 2.7V to 38V and is engineered for diagnostic coverage for ISO 262262 compliant systems. The wide VIN operating ...

Demo Board 

 

LTC7820 High Efficiency 24V to –24V, 10A Voltage Inverter with Hot Swap at Input

Jul 24th 2017
The LTC®7820 is a fixed ratio high voltage high power switched capacitor/charge pump controller. The device includes four N-channel MOSFET gate drivers to drive external power MOSFETs in voltage divider, doubler or inverter configurations. The device achieves a 2:1 stepdown ratio from an input voltage as high as 72V, a 1:2 ...

Circuit 

 

LTC7820 High Efficiency 48V to 12V, 20A Voltage Divider

Jul 24th 2017
The LTC®7820 is a fixed ratio high voltage high power switched capacitor/charge pump controller. The device includes four N-channel MOSFET gate drivers to drive external power MOSFETs in voltage divider, doubler or inverter configurations. The device achieves a 2:1 stepdown ratio from an input voltage as high as 72V, a 1:2 ...

Circuit 

 

LTC7820 High Efficiency 24V to 12V, 15A Voltage Divider with Disconnect FET at Output

Jul 24th 2017
The LTC®7820 is a fixed ratio high voltage high power switched capacitor/charge pump controller. The device includes four N-channel MOSFET gate drivers to drive external power MOSFETs in voltage divider, doubler or inverter configurations. The device achieves a 2:1 stepdown ratio from an input voltage as high as 72V, a 1:2 ...

Circuit 

 

DC2598A - LT8390A Demo Board | VIN = 4V to 24V, (60V transient) with VOUT = 12V at 4A @ 2MHz

Jul 20th 2017
Demonstration circuit 2598A is a 60V 2MHz synchronous buck-boost controller featuring the LT®8390A. It accepts an input voltage from 4V to 24V (with transient to 60V) and regulates 12V output at up to 4A. DC2598A features high efficiency and 2MHz switching frequency, a high speed for a 4-switch buck-boost controller. It ...

Demo Board 

 

DC2317A - LTC7103 Demo Board | VIN = 5V to 100V with VOUT = 5V at 2.3A @400kHz

Jul 13th 2017
Demonstration circuit 2317A is a 100V monolithic DC/ DC step-down regulator featuring the LTC®7103. The demo board is designed for a 5V/2.3A output from a 5V to 100V input at 400kHz switching frequency. The wide input range makes it suitable for automotive, industrial, medical instrument, and telecom applications. This buck ...

Demo Board LTspice 

 

DC2335A - LTC3636EUFD Demo Board | 3.1V to 20V Input with Vout1 range of 3.1V to 20V up to 6A & Vout2 range of 5V to 20V up to 6A

Jul 13th 2017
Demonstration circuit DC2335A is a dual output regulator consisting of two constant-frequency step-down converters, based on the LTC®3636 monolithic dual channel synchronous buck regulator. The DC2335A has an input voltage range of 3.1V to 20V, with each regulator capable of delivering up to 6A of output current. The DC2335A ...

Demo Board 

 

DC2329A - LTC7124 Demo Board | 17VIN, Dual 3.5A Synchronous Step-Down Regulator with Ultra-Low Quiescent Current

Jul 12th 2017
Demonstration circuit DC2329A features the LTC®7124IUDD: a wide input and output voltage range, high efficiency and power density, dual 3.5A DC/DC stepdown monolithic regulator. The input voltage range of the DC2329A is 3.1V to 17V. The default setting of VOUT1 is user selectable from 1.2V, 1.5V and 1.8V at 3.5A max. The ...

Demo Board 

 

DC2641A - LTC7801EUFD Demo Board | Sync Buck Controller, 16V ≤ VIN ≤ 100V, VOUT = 12V @ 10A

Jul 5th 2017
Demonstration circuit 2641A is a single output synchronous buck converter featuring the LTC7801EUFD in the 24-lead QFN package. The input voltage range is from 16V to 100V and the output is 12V/10A. The DC2641A is configured with a sense resistor for overcurrent protection. Inductor DCR current sensing is optional.   ...

Demo Board 

 

DC2568A - LTM4622A Demo Board | Ultrathin Dual Buck μModule; 4V ≤ VIN ≤ 20V, Vout1 = 5V @ 2A, Vout2 = 3.3V @ 2A

Jun 13th 2017
Demonstration circuit 2568A features the LTM4622A μModule® regulator, a tiny low profile high performance high efficiency dual step-down regulator. The LTM4622A has an operating input voltage range of 3.6V to 20V and is able to provide an output current of up to 2A for each channel. Each output’s voltage is programmable ...

Demo Board 

 

DC2522A - LT8609S Demo Board | Silent Switcher 2 Buck, 5.5V ≤ VIN ≤ 42V, VOUT = 5V @ 2A, fSW = 2MH

May 25th 2017
Demonstration circuit 2522A is a 42V, 2A/3A peak micropower synchronous step-down regulator featuring the LT®8609S. The demo board is designed for 5V output from a 5.5V to 42V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The LT8609S is a compact, high ...

Demo Board LTspice 

 

DC2565A - LT8607EMSE Demo Board | Sync Buck, 5.5V ≤ VIN ≤ 42V, VOUT= 5V @ 750mA, fSW = 2MHz

May 18th 2017
Demonstration Circuit 2565A is a 42V, 0.75A micropower synchronous step-down regulator featuring the LT®8607. The demo board is designed for 5V output from a 5.5V to 42V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The LT8607 is a compact, high efficiency, ...

Demo Board LTspice 

 

DC2564A - LT8606EMSE Demo Board │ Sync Buck, 5.5V ≤ VIN ≤ 42V; VOUT = 5V @ 350mA, fSW = 2MHz

May 18th 2017
Demonstration Circuit 2564A is a 42V, 0.35A micropower synchronous step-down regulator featuring the LT®8606. The demo board is designed for 5V output from a 5.5V to 42V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The LT8606 is a compact, high efficiency, ...

Demo Board LTspice 

 

DC2543A - LTC7820EUFD Demo Board | 2:1 Step-Down Charge Pump, 36V ≤ VIN ≤ 60V, VOUT = 0.5VIN @ Up to 20A

May 18th 2017
Demonstration circuit 2543A is a high efficiency, high density, open loop charge pump (inductorless) DC/DC converter. This demo board is a voltage divider which achieves a 2:1 step-down ratio from an input voltage from 36V to 60V. The output voltage is a fixed ratio of half of the input voltage (VIN/2) and can supply a 10A load ...

Demo Board 

 

DC2468A - LT8645S Demo Board | Sync Buck Silent Switcher, 5.6V ≤ VIN ≤ 65V, VOUT = 5V @ 8A, fSW=2MHz

May 17th 2017
Demonstration circuit 2468A is a 65V, 8A micropower synchronous step-down second generation Silent Switcher® with spread spectrum frequency modulation featuring the LT8645S. The demo board is designed for 5V output from a 5.6V to 65V input. The wide input range allows a variety of input sources, such as automotive batteries ...

Demo Board 

 

DC2530A - LT8640S Demo Board | Sync Buck Silent Switcher 2, 5.8V ≤ VIN ≤ 42V, VOUT = 5V @ 6A, fSW = 2MHz

May 16th 2017
Demonstration circuit 2530A is a 42V, 6A micropower synchronous step-down second generation Silent Switcher® with spread spectrum frequency modulation featuring the LT8640S. The demo board is designed for 5V output from a 5.8V to 42V input. The wide input range allows a variety of input sources, such as automotive batteries ...

Demo Board 

 

DC2593A - LT3045EDD-1 Demo Board | Ultralow Noise LDO, 3.8V ≤ VIN ≤ 20V, Vout = 3.3V @ 500mA

May 15th 2017
Demonstration circuit 2593A features the LT®3045EDD-1, a 500mA, ultralow noise, and ultrahigh power supply rejection ratio (PSRR) low dropout (LDO) regulator with programmable current limit.  DC2593A operates over an input range of 3.8V to 20V and has a 3.3V output. The LT3045-1 incorporates a VIOC tracking function ...

Demo Board 

 

DC2389A - LTM8073 Demo Board | Silent Switcher Buck μModule; 7V ≤ VIN ≤ 60V, Vout = 5V @ 3A

Apr 24th 2017
Demonstration circuit 2389A is a 60V, 3A step-down μModule® regulator featuring the LTM®8073. The demo board is designed for 5V output from a 7V to 60V input. The wide input range allows a variety of input sources, such as automotive batteries and industrial supplies. The user adjustable features of the LTM8073 such ...

Demo Board LTspice 

 

DC2246B - LT3042EDD Demo Board | Ultralow Noise, Ultrahigh PSRR RF LDO, 3.8V ≤ VIN ≤ 20V, VOUT = 3.3V @ 200mA

Mar 28th 2017
DC2246B is a linear regulator demonstration circuit featuring the LT®3042EDD, which is a 200mA, ultralow noise, and ultrahigh power supply rejection ratio (PSRR) RF low dropout (LDO) regulator with programmable current limit. DC2246B operates over an input voltage range of 3.8V to 20V and is configured for 3.3V at its output. ...

Demo Board 

 

DC2129A - LTC3119 Demo Board | Sync Buck-Boost, 2.5V ≤ VIN ≤ 18V, VOUT = 5V @ Up to 5A

Feb 24th 2017
Demonstration circuit 2129A features the LTC®3119, an 18V, 5A synchronous buck/boost DC/DC converter. The DC2129A has been designed for an input voltage range of 2.5V to 18V with an output voltage (VOUT) set to 5V. For VIN > 5V the output current can be as high as 5A. The unique 4-switch, single inductor architecture ...

Demo Board 

 

DC2111A-B - LTC3774EUHE Demo Board | Sync Buck Controller, 4-Phase (LTC3774 x2), 10V ≤ VIN ≤ 14V, Vout = 1.2V @ 120A

Feb 22nd 2017
Demonstration circuit DC2111A-B features the LTC®3774 in a 4-phase, high output current step-down converter with sub-mΩ DCR sensing. This high performance, high efficiency converter provides 1.2V @ 120A and operates at a switching frequency of 400kHz over an input voltage range of 10V to 14V. The 5mm × 5mm DrMOS ...

Demo Board 

 

DC2230A-B - LTM4636-1 Demo Board | Buck μModule Regulator with OV/Temp Protection, Stacked Inductor; 4.7V ≤ VIN ≤ 15V, Vout = 1V @ 40A

Feb 15th 2017
Demonstration circuit 2230A-B features the LTM®4636-1EY, a 40A high efficiency, switch mode step-down power μModule® regulator with overtemperature and input/output overvoltage protection. The input voltage range is from 4.7V to 15V. For a 4.7V to 5.5V input voltage range, short PVCC pin to the VIN pin with R8 = R21 ...

Demo Board LTspice 

 

DC2111A-A - LTC3774EUHE Demo Board | Sync Buck Controller, 4-Phase (LTC3774 x2), 10V ≤ VIN ≤ 14V, Vout = 1.2V @ 90A

Feb 13th 2017
Demonstration circuit DC2111A-A features the LTC®3774 in a 4-phase, high output current step-down converter with sub-mΩ DCR sensing. This high performance converter provides 1.2V @ 90A with N+1 MOSFET failure protection and operates at a switching frequency of 400kHz over an input voltage range of 10V to 14V. The 5mm ...

Demo Board 

 

DC2434A - LTC3864 Demo Board | Buck Controller, 12V ≤ VIN ≤ 60V, Vout = 12V @ 5A

Feb 13th 2017
Demonstration circuit 2434A is a high voltage, current mode DC/DC step-down converter featuring the LTC®3864. The board operates from an input range of 6V to 60V and provides a 12V, 5A output when the input exceeds 12V. The PMOSFET architecture allows it to operate seamlessly up to 100% duty cycle and function as a saturated ...

Demo Board LTspice 

 

DC765B - LT3479EDE Demo Board | Positive/ Negative Converter (LT3479 x2), Boost: 2.5V ≤ VIN ≤ 4.2V, Vout=7V@600mA, Inverter: 2.5V ≤ VIN ≤ 12V, Vout=-5V@600mA

Feb 9th 2017
Demonstration circuit 765B is a general purpose 1MHz, positive and negative converters featuring the LT3479EDE. The demo circuit demonstrates small size and low component count in a boost circuit and an inverting circuit. The boost converter is set up to convert a 2.5V to 4.2V input to 7V output at 600mA. The inverting circuit ...

Demo Board 

 

LT4320 LT4320 Ideal Diode Bridge

Jan 27th 2017
The LT®4320/LT4320-1 are ideal diode bridge controllers that drive four N-channel MOSFETs, supporting voltage rectification from DC to 600Hz typical. By maximizing available voltage and reducing power dissipation (see thermograph comparison below), the ideal diode bridge simplifies power supply design and reduces power supply ...

Circuit 

 

DC2457A - LT8390 Demo Board | Sync Buck-Boost Controller, 4V ≤ VIN ≤ 60V, VOUT = 12V @ 4A (Fsw=400kHz)

Jan 20th 2017
Demonstration circuit DC2457A is a 12V, 4A, 4-switch synchronous buck-boost regulator featuring low EMI noise and small footprint. It runs at 400kHz switching frequency. Spread spectrum frequency modulation (SSFM) can be turned on with a simple jumper, reducing EMI. DC2457A also comes with other low EMI features including optimized ...

Demo Board 

 

LT8315 12V High Input Voltage Isolated Flyback Converter

Jan 19th 2017
The LT®8315 is a high voltage flyback converter with integrated 630V/300mA switch. No opto-isolator is needed for regulation. The device samples the output voltage from the isolated flyback waveform appearing across a third winding on the transformer. Quasi-resonant boundary mode operation improves load regulation, reduces ...

Circuit 

 

LT8315 Wide Input Range Non-Isolated 12V Buck Converter

Jan 19th 2017
The LT®8315 is a high voltage flyback converter with integrated 630V/300mA switch. No opto-isolator is needed for regulation. The device samples the output voltage from the isolated flyback waveform appearing across a third winding on the transformer. Quasi-resonant boundary mode operation improves load regulation, reduces ...

Circuit 

 

LT8315 83% Efficiency 5V/1.5A Isolated Flyback Converter

Jan 19th 2017
The LT®8315 is a high voltage flyback converter with integrated 630V/300mA switch. No opto-isolator is needed for regulation. The device samples the output voltage from the isolated flyback waveform appearing across a third winding on the transformer. Quasi-resonant boundary mode operation improves load regulation, reduces ...

Circuit 

 

LT8315 85% Efficient Universal Input Offline Power Supply

Jan 19th 2017
The LT®8315 is a high voltage flyback converter with integrated 630V/300mA switch. No opto-isolator is needed for regulation. The device samples the output voltage from the isolated flyback waveform appearing across a third winding on the transformer. Quasi-resonant boundary mode operation improves load regulation, reduces ...

Circuit 

 

DC2123B - LT3790 Demo Board | Sync Buck-Boost, 8V ≤ VIN ≤ 56V, Vout = 24V at up to 5A

Jan 18th 2017
The DC2123B is a 60V four-switch synchronous buck-boost controller that demonstrates the high power capability of the LT®3790. The output is 24V and the maximum output current is 5A. The switching frequency is 200kHz and efficiency is as high as 98% for a 24V input. The LT3790 is capable of high power operation. DC2123B ...

Demo Board 

 

LTC3119 3.3V,1.5MHz Wide Input Regulator

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LTC3119 5V, 2MHz Wide Input Regulator

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LTC3119 12V, 2MHz Wide Input Regulator

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LTC3119 12V, 750kHz Regulator with Input Supply Rundown

Jan 18th 2017
The LTC®3119 is a high efficiency 18V monolithic buck-boost converter that can deliver up to 5A of continuous output current. Extensive feature integration and very low resistance internal power switches minimize the total solution footprint for even the most demanding applications. A proprietary 4-switch PWM architecture ...

Circuit 

 

LT8630 –15V, 300mA Step-Down Converter

Jan 17th 2017
The LT®8630 is a current mode PWM step-down DC/DC converter with internal synchronous switches that provide current for output loads up to 0.6A. The wide input range of 3V to 100V makes the LT8630 suitable for regulating power from a wide variety of sources, including automotive and industrial systems and 36V to 72V telecom ...

Circuit 

 

LT8630 High Efficiency 100Vin, 12Vout Step-Down Converter

Jan 17th 2017
The LT®8630 is a current mode PWM step-down DC/DC converter with internal synchronous switches that provide current for output loads up to 0.6A. The wide input range of 3V to 100V makes the LT8630 suitable for regulating power from a wide variety of sources, including automotive and industrial systems and 36V to 72V telecom ...

Circuit 

 

LT8630 100Vin, 28Vout Step-Down Converter

Jan 17th 2017
The LT®8630 is a current mode PWM step-down DC/DC converter with internal synchronous switches that provide current for output loads up to 0.6A. The wide input range of 3V to 100V makes the LT8630 suitable for regulating power from a wide variety of sources, including automotive and industrial systems and 36V to 72V telecom ...

Circuit 

 

LT8630 6.5V to 100Vin, 5Vout/0.6A Step-Down Converter

Jan 17th 2017
The LT®8630 is a current mode PWM step-down DC/DC converter with internal synchronous switches that provide current for output loads up to 0.6A. The wide input range of 3V to 100V makes the LT8630 suitable for regulating power from a wide variety of sources, including automotive and industrial systems and 36V to 72V telecom ...

Circuit 

 

LTM4647 Typical 6V to 15V Input 1.0V at 30A Output Design

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

Circuit 

 

LTM4647 Typical 4.7V to 5.5V Input 1.2V at 30A Output Design

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

Circuit 

 

LTM4647 6V to 15V Input, 1.0V Output at 60A

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

Circuit 

 

LTM4647 6V to 15V Input, 1.0V and 1.2V Output with Tracking

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

Circuit 

 

LTM4647 3-Phase 1V at 90A Design with Extra 1 Phase 30A Redundancy

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

Circuit 

 

LTM4647 4-Phase 6-15Vin, 1Vout at 120A Step Down uModule Design

Jan 17th 2017
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

Circuit 

 

LTC3897 High Efficiency 2-Phase 24V Boost Converter with In-Rush Current Control, Overcurrent Protection, Input Voltage Surge Protection and Reverse Input Protection

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

LTC3897 High Efficiency 2-Phase 48V Boost Converter with Reverse Input Protection (Surge Stopper Controller Not Used)

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

LTC3897 High Efficiency 2-Phase 48V Boost Converter with Overcurrent Protection (Ideal Diode and Surge Stopper Controllers at the Output)

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

LTC3897 Nonsynchronous 107V/1.5A 2-Phase Boost Converter with In-Rush Current Control, Overcurrent Protection, Input Voltage Surge Protection and Reverse Input Protection

Jan 17th 2017
The LTC®3897 is a synchronous boost DC/DC controller with surge stopper and ideal diode controller. ...

Circuit 

 

DC2493A - LTC3892EUH-2 Demo Board | 2-Phase Sync Buck Controller, 16V ≤ VIN ≤ 55V; VOUT = 12V @ 30A

Jan 3rd 2017
Demonstration circuit 2493A is a high output voltage capable, high efficiency synchronous PolyPhase® buck converter featuring the LTC®3892EUH-2. The DC2493A has a wide input voltage range from 16V to 55V, and is capable of delivering up to 30A of output current. The output voltage of the DC2493A is set to 12V, however, ...

Demo Board 

 

DC2454A - LTC3887EUJ-1/LTC3870EUF-1 Demo Board | Dual Phase PMBus Buck Controller with Slave Controller, 7V ≤ VIN ≤ 14V, 0.8V ≤ VOUT ≤ 1.8V @ 100A

Dec 19th 2016
Demonstration circuit 2454A is a high current, high efficiency, poly-phase synchronous buck converter featuring the LTC®3887EUJ-1, a dual-phase current mode controller, and the LTC3870EUF-1, a dual-phase slave controller. The LTC3887-1 has the PMBus interface and the power system management functions. ...

Demo Board 

 

DC2230A-A - LTM4636 Demo Board | Buck μModule Regulator, Stacked Inductor, 4.7V ≤ VIN ≤ 15V, Vout = 0.6V to 3.3V @ 40A

Dec 2nd 2016
Demonstration circuit 2230A-A features the LTM®4636EY, a 40A high efficiency, switch mode step-down power μModule® regulator. The input voltage range is from 4.7V to 15V. For input voltage range from 4.7V to 5.5V, short PVCC pin to VIN pin with R8 = R21 = 0Ω and remove R17. The output voltage range is 0.6V to ...

Demo Board LTspice 

 

DC2479A-B - LTM4650EY-1 Demo Board | Dual Phase Buck μModule Regulator, 4.5V ≤ VIN ≤ 15V, Vout = 0.6V to 1.8V @ 50A

Dec 2nd 2016
Demonstration circuit 2479A-B features the LTM®4650EY-1, the high efficiency, high density, dual 25A, single 50A switch mode step-down power module regulator with external compensation. The input voltage is from 4.5V to 15V. The output voltage is programmable from 0.6V to 1.8V. DC2479A-B is configured as dual-phase, single-output, ...

Demo Board LTspice 

 

DC2479A-A - LTM4650EY Demo Board | Dual Phase Buck μModule Regulator, 4.5V ≤ VIN ≤ 15V, Vout = 0.6V to 1.8V @ 50A

Dec 2nd 2016
Demonstration circuit 2479A-A features the LTM®4650EY, the high efficiency, high density, dual 25A, single 50A switch mode step-down power module regulator. The input voltage is from 4.5V to 15V. The output voltage is programmable from 0.6V to 1.8V. DC2479A-A is configured as dual-phase, single-output, which can deliver ...

Demo Board LTspice 

 

DC2108A - LTC3897 Demo Board | Sync Boost Controller, 16V ≤ VIN ≤ 55V,Vout = 48V @ 4A to 12A

Nov 30th 2016
Demonstration circuit DC2108 is DC/DC boost converter featuring the LTC®3897 constant frequency current mode boost controller. The DC2108A operates over a 16V to 55V input and provides 4A to 12A of output current as shown in Figure 3. The 160kHz (2 •160kHz at the output) constant frequency operation results in a small ...

Demo Board LTspice 

 

DC2199B-C - LTC3765EMSE/LTC3766EGN Isolated Demo Board | Forward Converter with Sync Rectification, 36V ≤ VIN ≤ 60V; VOUT = 56V @ 5.4A

Nov 29th 2016
Demonstration circuit 2199B-C is a 300W isolated forward converter with synchronous rectification featuring the LTC3765/LTC3766 chip-set. It produces a regulated 56V, 5.4A output from an input voltage range of 36V to 60V. ...

Demo Board 

 

DC2131A - LTC3623 Demo Board | Silent Switcher Sync Buck, 4V ≤ VIN ≤ 15V, Vout = 1V/1.5V/2.5V/3.3V/5V @ ±5A

Nov 29th 2016
Demonstration circuit 2131A is a current mode DC/DC step-down Silent Switcher® buck regulator featuring the LTC®3623. The board operates from an input range of 4V to 15V, and provides ±5A of output current. The output voltage of the demonstration board can be set from 0V to VIN – 0.5V. It operates at 1MHz ...

Demo Board 

 

LTM4647 4 Phase 1V at 120A Design

Nov 17th 2016
The LTM®4647 is a complete 30A output switching mode step-down DC/DC μModule® (power module) regulator. Included in the package are the switching controller, power FETs, inductor and all supporting components. Operating over an input voltage range of 4.7V to 15V, the LTM4647 supports an output voltage range of 0.6V ...

Circuit 

 

DC2504A - LT8630 Demo Board | Sync Buck, 13V ≤ VIN ≤ 100V, VOUT = 12V @ 600mA

Nov 14th 2016
Demonstration circuit 2504A is a step-down converter featuring LT8630. The LT8630 is a monolithic, variable frequency, current mode synchronous step-down switching regulator. The demo board is designed for 12V output from a 13V to 100V input. The wide input range makes it suitable for regulating power from a variety of sources, ...

Demo Board LTspice 

 

DC2141A - LTM4647 Demo Board | Buck μModule, 6V ≤ VIN ≤ 15V or 4.7V ≤ VIN ≤ 6V, VOUT = 0.6V to 1.8V @ 30A

Nov 9th 2016
Demonstration circuit 2141A features the LTM®4647EY, a 30A high efficiency, switch mode step-down power μModule regulator. The input voltage range is from 6V to 15V. To use DC2141A for input voltage range from 4.7V to 6V, connect INTVCC to SVIN (change R22 from OPT to 0Ω), DRVCC to VIN (change R21 from 0Ω ...

Demo Board LTspice 

 

DC2138B - LT8301ES5 Isolated Demo Board | No-Opto Flyback, 10V ≤ VIN ≤ 32V, VOUT = 5V @ 0.7A to 1A

Oct 19th 2016
Demonstration circuit 2138B is an isolated flyback converter featuring the LT®8301. This demo circuit outputs 5V from a 10V to 32V input, with a nominal of 24V. The output current capability increases with the input voltage. The standby input current of the demo circuit is less than 950μA (typical) at VIN = 24V. ...

Demo Board 

 

DC1989B-C - LTM4676A Demo Board | LTM4676A(x4) Current Shared, PMBus Buck uModule, 4.5V ≤ VIN ≤ 17V, Vout = 0.5V to 4V @ 100A

Oct 18th 2016
Demonstration circuit 1989B-C is a high efficiency, high density, μModule regulator with 4.5V to 17V input range. The output voltage is adjustable from 0.5V to 4V, and it can supply 100A maximum load current. The demo board has four LTM®4676A μModule regulators. The LTM4676A is a dual 13A or single 26A step-down regulator ...

Demo Board 

 

DC2431A - LT8390EFE Demo Board | Sync Buck-Boost, 9V ≤ VIN ≤ 36V, VOUT = 12V @ 25A

Oct 13th 2016
Demonstration circuit 2431A is a 4-switch synchronous buck-boost regulator that demonstrates the high power capability of the LT®8390. The output is 12V and the maximum output current is 25A for up to 300W power delivery. The switching frequency is 150kHz and efficiency can go higher than 98%. ...

Demo Board LTspice 

 

DC1989B-B - LTM4676A Demo Board | LTM4676A(x3) Current Shared, PMBus Buck uModule, 4.5V ≤ VIN ≤ 17V, Vout = 0.5V to 4V @ 75A

Oct 13th 2016
Demonstration circuit 1989B-B is a high efficiency, high density, μModule regulator with 4.5V to 17V input range. The output voltage is adjustable from 0.5V to 4V, and it can supply 75A maximum load current. The demo board has three LTM®4676A μModule regulators, and the LTM4676A is a dual 13A or single 26A step-down ...

Demo Board 

 

DC1989B-A - LTM4676A Demo Board | LTM4676A(x2) Current Shared, PMBus Buck uModule, 4.5V ≤ VIN ≤ 17V, Vout = 0.5V to 4V @ 50A

Oct 13th 2016
Demonstration circuit 1989B-A is a high efficiency, high density, μModule regulator with 4.5V to 17V input range. The output voltage is adjustable from 0.5V to 4V, and it can supply 50A maximum load current. The demo board has two LTM®4676A μModule regulators, and the LTM4676A is a dual 13A or single 26A step-down ...

Demo Board 

 

LTC3723-1 130W Isolated Push-Pull Converter for PoE Applications with 93.5% Peak Efficiency

Jeoffrey (Zijian) Wang - Applications Engineer Oct 3rd 2016
This solution is a non-synchronous isolated push-pull converter designed for PoE applications, which can generate a 50V/2.6A output from a 34-38V (36V typical) input voltage range. A 93.5% peak efficiency is achieved for the whole isolated converter and the total solution can be fit into 1/8 brick footprint (2.3” x 0.9”) ...

Circuit LTspice 

 

Too many results please adjust your filters