1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Search - Clock Generation and Distribution

DC2226A-A - 4-Channel 14-bit 250Msps JESD204B ADC with Clocking [Featuring LTC2123, LTC6951]

Dec 8th 2016
Demonstration Circuit 2226A-A is a reference design for a four-channel, 250Msps ADC system consisting of two LTC®2123, dual 14-bit 250Msps ADCs and a JESD204B Subclass 1 clocking solution based on the LTC6951 Clock Synthesizer with Integrated VCO. Other dash options reserved for future use. No external clock source is required ...

Demo Board LinearLabTools PScope 

 

Ultralow Jitter 2MHz to 2700MHz Clock Synthesizer with Distribution Features Multichip Synchronization & JESD204B Clocking

Mar 22nd 2016
MILPITAS, CA - March 22, 2016 - Linear Technology Corporation announces the LTC6951, a low phase noise integer-N synthesizer with an integrated VCO and an ultralow jitter clock distribution section, ideal for clocking data converters. The LTC6951 features four high performance current mode logic (CML) outputs, each equipped ...

Press Release 

 

DC2248A-B - LTC6951-1 Demo | 5-Output Integer-N PLL with Integrated VCO, Output Range: 2.1MHz to 2.7GHz (requires DC590 or DC2026)

Mar 1st 2016
Demonstration circuit 2248A features the LTC®6951, an Ultralow Jitter Multi-Output Clock Synthesizer with Integrated VCO. For ease of use, the DC2248A is powered from a single 6V supply and comes installed with a 100MHz reference. Direct access to the LTC6951 5V, 3.3V and the reference supplies is possible by removing jumpers. ...

Demo Board Linduino LTC6951Wizard QuikEval System 

 

DC2248A-A - LTC6951 Demo | 5-Output Integer-N PLL with Integrated VCO, Output Range: 1.95MHz to 2.5GHz (requires DC590 or DC2026)

Mar 1st 2016
Demonstration circuit 2248A features the LTC®6951, an Ultralow Jitter Multi-Output Clock Synthesizer with Integrated VCO. For ease of use, the DC2248A is powered from a single 6V supply and comes installed with a 100MHz reference. Direct access to the LTC6951 5V, 3.3V and the reference supplies is possible by removing jumpers. ...

Demo Board Linduino LTC6951Wizard QuikEval System 

 

Ultralow Jitter Clock Distribution Solution Combines EZSync Multichip Synchronization

Nov 23rd 2015
MILPITAS, CA - November 23, 2015 - Linear Technology Corporation introduces the LTC6954, a family of ultralow jitter 1.8GHz clock distribution chips with three independent outputs, each with its own divider and phase delay. With less than 20fsRMS additive jitter over the 12kHz to 20MHz bandwidth, the LTC6954 minimizes the amount of ...

Press Release 

 

Five Output Ultralow Jitter Clock Distributor with PLL Provides Unique Multichip Output Synchronization Method

Jan 21st 2015
MILPITAS, CA - January 21, 2015 - Linear Technology Corporation announces the LTC6950, a low phase noise integer-N synthesizer core with an ultralow jitter clock distribution output section. The LTC6950 is ideal for generating and distributing the low jitter signals essential to clocking data converters with a high signal-to-noise ...

Press Release 

 

DC1795A - LTC6950 Demo Board| Integer-N PLL with 5 outputs (requires DC590 or DC2026)

Jan 5th 2015
Demonstration circuit 1795A features the LTC®6950, a 1.4GHz low phase noise, low jitter PLL with clock distribution. For ease of use, the DC1795A comes installed with a 100MHz reference and a 1GHz VCSO, voltage controlled SAW oscillator with sine wave output. All differential inputs and outputs have 0.5" spaced SMA connectors. ...

Demo Board ClockWizard Linduino 

 

A Robust 10MHz Reference Clock Input Protection Circuit and Distributor for RF Systems

Michel Azarian - Product Marketing Engineer May 1st 2013
Introduction Designing the reference input circuit for an RF system can prove tricky. One challenge is maintaining the phase noise performance of the input clock while meeting the protection, buffering and distribution requirements for the clock. This article shows how to design a 10MHz reference input circuit and optimize ...

Blog Post 

 

Dual Output Sine Wave to Logic Converter Utilizes Selectable Input Filtering for Lowest Additive Jitter

Apr 8th 2013
MILPITAS, CA – April 8, 2013 – MILPITAS, CA – Linear Technology Corporation introduces the LTC6957, a DC to 300MHz dual output buffer/driver/logic translator, ideal for converting sine waves into low phase noise logic level signals. Prior solutions were unable to perform this conversion without introducing a significant amount ...

Press Release 

 

DC1765A-B - LTC6957HMS-2 Demo Board | Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with LVDS Outputs

Mar 11th 2013
DC1765A-B - Demo Board for:LTC6957 - Low Phase Noise, Dual Output Buffer/Driver/Logic Converter ...

Demo Board 

 

DC1765A-A - LTC6957HMS-1 Demo Board | Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with LVPECL Outputs

Mar 11th 2013
DC1765A-A - Demo Board for:LTC6957 - Low Phase Noise, Dual Output Buffer/Driver/Logic Converter ...

Demo Board 

 

DC1766A-B - LTC6957HMS-4 Demoboard:Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with Complementary CMOS Outputs

Mar 11th 2013
DC1766A-B - Demo Board for:LTC6957 - Low Phase Noise, Dual Output Buffer/Driver/Logic Converter ...

Demo Board 

 

DC1766A-A - LTC6957HMS-3 Demoboard:Low Phase Noise, Dual Output Buffer/Driver/Logic Converter with In-Phase CMOS Outputs

Mar 11th 2013
DC1766A-A - Demo Board for:LTC6957 - Low Phase Noise, Dual Output Buffer/Driver/Logic Converter ...

Demo Board