Solutions Search - Battery Cell Balancers
DC2043B - LTC3305EFE Demo Board | Lead Acid Battery Balancer for 2-4 Cells
Dec 15th 2016
Demonstration circuit 2043B is a lead-acid battery balancer featuring the LTC®3305. The LTC3305 balances up to four lead-acid batteries connected in series and incorporates all voltage monitoring, gate drive and fault detection circuitry. The LTC3305 employs an auxiliary battery or an alternative storage means to transfer ...
Active Battery Cell Balancing
Aug 18th 2016
With passive and active cell balancing, each cell in the battery stack is monitored to maintain a healthy battery state of charge (SoC). This extends battery cycle life and provides an added layer of protection by preventing damage to a battery cell due to deep discharging over overcharging. Passive balancing results in all ...
DC2100B-C - 12 Cell 4A Controller Board. Bi-Directional Active Cell Balancer with LTC3300-1, LTC6804-2 & LTC6820
Mar 29th 2016
Demonstration Circuit DC2100B-D is a stackable, bidirectional cell balancer slave board using the LTC6804-2 and the LTC®3300-1 ICs to achieve active balancing of up to 12 Li-Ion cells. It requires the DC2100B-C for proper operation. The DC2100B-D uses a single LTC6804-2 Multi-Cell Addressable Battery Stack Monitor IC to ...
DC2100B-D - 12 Cell 4A Stackable Slave Bidirectional Active Cell Balancer Featuring LTC6804-2 and LTC3300-1(x2)
Jul 16th 2015
Demonstration Circuit DC2100B-D is a stackable, bidirectional cell balancer slave board using the LTC6804-2 and the LTC®3300-1 ICs to achieve active balancing of up to 12 Li-Ion cells. It requires the DC2100B-C for proper operation. The DC2100B-D uses a single LTC6804-2 Multi-Cell Addressable Battery Stack Monitor IC to ...
LTC3305 Lead Acid Battery Balancer - Video Product Brief
May 28th 2015
The LTC®3305 balances up to 4 lead acid batteries connected in series. All voltage monitoring, gate drive, and fault detection circuitry is integrated. The LTC3305 is designed for stand-alone operation and does not require any external control circuitry.
The LTC3305 employs an auxiliary battery or ...
Determine Balancing Current for the LTC3305 Lead-Acid Battery Balancer
Apr 14th 2015
Design Note DN539: Introduction
The LTC®3305 is a lead-acid battery balancer that uses an auxiliary battery or an alternative storage cell (AUX) to transfer charge to and from individual batteries within a series-connected stack. The balancer controls external NMOS switches to sequentially connect the auxiliary battery ...
Lead Acid Battery Balancer
Mar 31st 2015
Active balancing of series connected battery stacks exists for many common battery chemistries, but up until now not for lead acid. Skepticism abounds as to the need and benefit of active balancing for lead acid batteries but this skepticism is misplaced. As this video will show, series-connected lead acid batteries do require ...
Stand-Alone Lead Acid Battery Balancing IC Works with up to Four 12V Batteries in Series
Jan 27th 2015
MILPITAS, CA - January 27, 2015 - Linear Technology Corporation
announces the LTC3305, a single IC, stand-alone multicell battery
balancer for 12V lead acid batteries. Balancing works by absorbing
charge from higher voltage batteries and transferring that charge
to lower voltage batteries so that all are charged equally. Charge
is ...
DC2100A-D - 12 Cell 4A Stackable Slave Bidirectional Active Cell Balancer Featuring LTC6804-2 and LTC3300-1(x2)
Jun 10th 2014
Please see the DC2100B for any new designs.
Demonstration Circuit DC2100A-D is a stackable, bidirectional cell balancer slave board using the LTC6804-2 and the LTC®3300-1 ICs to achieve active balancing of up to 12 Li-Ion cells. It requires the DC2100A-C for proper operation. The DC2100B-D uses a single LTC6804-2 Multi-Cell ...
DC2100A-C - 12 Cell 4A Controller Board Featuring LTC6804-2 and LTC3300-1 (x2) for Bidirectional Active Cell Balancing
Jun 10th 2014
Please see the DC2100B for any new designs.
Demonstration Circuit DC2100A-C is a stand-alone Active Cell Balancer for balancing up to 12 Li-Ion cells; it also is the master controller board when used with DC2100B-D slave boards for a stackable battery balancing solution. It consists of the LTC6804-2 Multicell Addressable ...
2.5A Monolithic Active Cell Balancer with Telemetry Interface
Dec 16th 2013
MILPITAS, CA – December 16, 2013 – Linear Technology Corporation
announces the LT8584,
a monolithic flyback DC/DC converter designed to actively balance
high voltage stacks of batteries. These battery stacks are commonly
found in electric and hybrid vehicles as well as fail-safe power
supplies and energy storage systems. ...
High Efficiency Bidirectional Multicell Active Balancer Maximizes Capacity Recovery in Series-Connected Battery Stacks
Mar 5th 2013
MILPITAS, CA – March 5, 2013 – Linear Technology Corporation
announces the LTC3300-1, a high efficiency bidirectional multicell
battery balancer for equalizing cell state of charge (SoC) in a
series-connected battery stack. With the LTC3300-1, applications
such as electric vehicles (EVs), plug-in hybrid EVs and large
energy ...
Loading