1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Xilinx Kintex UltraScale PCI Express Platform

HiTech Global's HTG-K800 board is populated by the Xilinx Kintex UltraScale XCKU-60, 085, or 115 FPGA and supports a wide variety of expansion modules.

 

Kintex_UltraScale_boardKintex UltraScale Board

 

 

HTG-K800 Power TreeHTG-K800 Power Tree

 

 

Rail / Function  Part Number General Description of Part
0.95V: VCCINT (FPGA Core) LTM4620 Dual 13A Single 26A DC/DC µModule regulator
1.0V: MGTAVCC
1.2V: MGTAVTT, HMC
0.95V: VCCBRAM
2.5V, 1.8V, 1.2V, 3.3V: System Power, FMC
0.9V: VDD_HMC
LTM4644 17V, 1A Synchronous Step-Dwon Regulator with 3.5uA Quiescent Current
Clock for uModule Regulators LTC6900 Low Power, 1kHz to 20MHz Resistor Set SOT-23 Oscillator

 

 

UltraScale Board Block DiagramHTG-K800 Board Block Diagram

 

 

 

 


Software

LTpowerPlanner

Included in the LTpowerCAD toolbox, LTpowerPlanner is a system architecture tool for system-level power management design and optimization.

To open the LTpowerPlanner project file:

  • Step 1: If you have not installed LTpowerCAD on this computer, download and install LTpowerCAD
  • Step 2: Within LTpowerCAD, open the "LTC Toolbox" and open LTpowerPlanner
  • Step 3: Download the project file by right clicking on the link below and selecting "Save Target As".
  • Step 4: After saving the file to your computer, open the project file by selecting 'Open Project' from the 'File' menu in LTpowerPlanner