Deutsch  |  Français  |  Italiano  |   简体中文  |  繁體中文  |  日本語  |  한국어

PowerPath Prioritizer Eases Power System Design with Multiple, Disparate Input Sources & Protects Against Reversed Inputs

MILPITAS, CA – December 10, 2012 – Linear Technology Corporation introduces the LTC4417, a triple-supply prioritized PowerPath™ controller for 2.5V to 36V systems. The controller selects the highest priority valid supply among three inputs to power the load. Priority is defined by pin assignment, while a supply is considered valid after it has been inside a voltage window set by 1.5% accurate undervoltage and overvoltage thresholds for 256ms. The LTC4417 greatly simplifies designs, deriving power from multiple, disparate voltage sources common in handheld and high availability electronics. In such systems, a prioritizer is a better solution than a simple diode-OR, especially when the preferred power source is not the highest voltage. The LTC4417 controller also protects the load from reversed inputs to −42V.

PowerPath switching is implemented by external back-to-back P-channel MOSFETs protected by integrated 6V gate clamps. Carefully designed fast switch control blocks reverse and cross-conduction current while preventing output voltage droop. A low 28µA operating current, sub-1µA draw from the lower standby supplies, and a shutdown mode make the controller ideal for battery backup systems. The LTC4417’s wide operating range accommodates a wide range of power sources such as wall adapters, USB, Firewire, supercapacitors, and batteries such as lead-acid,
Li-Ion and stacked NiCd. Built-in cascading support extends the LTC4417 prioritization beyond three supplies. To minimize start-up inrush current, the first connection is soft-started. Open-drain outputs indicate the supplies that are within their valid voltage window. Undervoltage and overvoltage hysteresis is adjustable with a single resistor.

Specified over the full commercial, industrial and automotive temperature ranges, the LTC4417 is offered in 24-pin QFN (4mm x 4mm) and 24-lead narrow SSOP packages. Pricing begins at $3.05 each for 1,000-piece quantities and the device is available today in production quantities. Evaluation circuit boards are available online or from your local Linear Technology sales office. For more information, visit www.linear.com/powerpath_controllers.

Summary of Features: LTC4417 Connects Highest Priority Valid Supply to Output 256ms Long, 1.5% Precise Overvoltage & Undervoltage Validation Wide Operating Voltage Range: 2.5V to 36V -42V Protection Against Reversed Battery Blocks Reverse & Cross-Conduction Fast Switchover Minimizes Output Voltage Droop Low 28µA Operating Current <1µA Current Draw from Supplies Less than VOUT Adjustable Overvoltage & Undervoltage Hysteresis Cascadable for Additional Input Supplies Available in 24-Lead Narrow SSOP & QFN Packages

PowerPath™ Controller Selects Highest Priority Valid Input & Protects Against Reversed Inputs Click Photo for High-Res Image