Deutsch | Français | Italiano | 简体中文 | 繁體中文 | 日本語 | 한국어
Hot Swap™ I2C Bus Buffers Provide High Noise Margins, Level Shifting & Stuck Bus Recovery
MILPITAS, CA – October 24, 2011 – Linear Technology Corporation introduces the LTC4313 and LTC4315 high noise margin buffers that provide capacitance buffering and bus extension capabilities to I²C/SMBus/PMBus systems. As the number of devices on an I²C bus expands, additive capacitances can critically lengthen rise times. The LTC4313 and LTC4315 alleviate this problem by segmenting the bus and offer the additional advantage of high logic low noise margin, thanks to their guaranteed minimum VIL of 0.3*VCC. This allows the LTC4313 and LTC4315 to operate with noncompliant I²C devices that drive a high logic low output voltage (VOL). This also permits a number of LTC4313s or LTC4315s to be connected in series, and improves the reliability of I²C communications in large noisy systems.
The LTC4313 and LTC4315 are well suited for a variety of computing, networking and data storage systems that use multiple I/O cards with different supply and bus voltage levels. The devices provide automatic level translation from low voltage systems down to 1.4V to higher voltage systems up to 5.5V. The LTC4315 has a second supply pin, allowing use of separate input and output bus pull-up supplies. Rise time accelerators provide pull-up currents during bus rising edges that reduce rise times, ultimately resulting in reduced power consumption, improved logic low noise margins and the ability to design with higher bus capacitances beyond I²C limitations. The LTC4313 provides strong, slew-limited switch (LTC4313-1) or 2mA current source (LTC4313-2) rise time accelerator current, while the LTC4315 provides pin-selectable (strong slew-limited switch, 2mA or off) rise time accelerator current. Safety measures include a stuck bus disconnect and recovery feature to disengage the input from all enabled output channels and to issue clocks to try to get the stuck slave to release the data line, a fault output to signal the host a bus is stuck low (LTC4315 only), and ±4kV HBM ESD protection for increased ruggedness.
The LTC4313 and LTC4315 are available today in commercial and
industrial temperature grades. The LTC4313 is available in an 8-pin
3mm x 3mm DFN or 8-lead MSOP package, and the LTC4315 is available
in a 12-pin
4mm x 3mm DFN or 12-lead MSOP package. All packages are RoHS
compliant. The devices are priced starting at $2.40 each in 1,000
piece quantities and are available today in production quantities.
Please visit www.linear.com/product/LTC4313 and www.linear.com/product/LTC4315 for product selection
information.
|
Summary of Features: LTC4313/LTC4315
|
High Noise Margin Level Shifting 2-Wire |
