1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Monitor, Control and Protection Power-over-Ethernet (PoE) Interface Controllers PoE Power Sourcing Equipment (PSE)

Media Contacts

Deutsch  |  Français  |  Italiano  |   简体中文  |  繁體中文  |  日本語  |  한국어

High Efficiency Quad PSE Controller Addresses IEEE 802.3at PoE+ Standard

MILPITAS, CA - June 1, 2009 - Linear Technology Corporation introduces the LTC4266, a 4-port Power over Ethernet (PoE) controller for Power Sourcing Equipment (PSE) required to provide IEEE 802.3at (25.5W) or proprietary higher power levels. Next-generation PoE applications call for more power to support demanding features, while increasing power efficiency in an effort to be more "green" and reduce costs. The LTC4266 provides up to 100W over 4-pair Ethernet cabling and is fully compliant with the new IEEE 802.3at PoE+ standard and backward compatible with the prior IEEE 802.3af PoE standard. To help conserve power, the LTC4266 delivers the lowest-in-industry heat dissipation by using low RDS(ON) MOSFETs and 0.25Ohm sense resistors, eliminating the need for expensive heat sinks and providing a more robust PSE solution.

LTC4266 PR Image
Click Photo for High-Res Image 		  The LTC4266 is suitable for a wide variety of PSE applications, including next-generation switches, routers, hubs and midspans. Users will appreciate the extremely low power dissipation which makes thermal design significantly easier than when designing with PSEs that integrate more fragile, normally higher RDS(ON), MOSFETs. Up to four independent PSE channels are available. IEEE 802.3at powered devices (PDs) can request up to 25.5W of power by responding to 2-event classification from the LTC4266, confirming that the PD is indeed a high power device. PD discovery is accomplished using a proprietary dual-mode, four point detection mechanism that ensures the best immunity from false PD detection. Advanced power management also includes prioritized fast shutdown, 14.5-bit per-port voltage and current readback, 8-bit programmable current limits and 7-bit programmable overload current limits. A 1MHz I2C interface allows a host controller to digitally configure the IC or query port readings.

The LTC4266 is offered in commercial and industrial temperature grades, and is available in RoHS-compliant 5mm x 7mm QFN-38 or SSOP-36 packages. The LTC4266 is priced starting at $6.95 each in 1,000 piece quantities and is available today in production quantities. The LTC4266 provides an upgrade path from Linear’s existing PSE controllers, including the IEEE 802.3af pin-compatible LTC4258 or LTC4259A, and is supported with years of technical experience in PoE circuit design for a smooth transition to the new PoE+ standard. Please visit www.linear.com for more product information.

 
Summary of Features: LTC4266
•  Four Independent PSE Channels
•  Compliant with IEEE 802.3at Type 1 and 2
•  130mW/port at 600mA
•  Advanced Power Management
  • 8-Bit Programmable Current Limit (ILIM)
  • 7-Bit Programmable Overload Current Limit (ICUT)
  • Fast Shutdown of Preselected Ports
  • 14.5-Bit Port Current/Voltage Monitoring
  • 2-Event Classification
•  Very High Reliability 4 Point PD Detection:
  • 2-Point Forced Voltage
  • 2-Point Forced Current
•  High Capacitance Legacy Device Detection
•  LTC4259A-1 and LTC4258 Pin-Software-Compatible
•  Supports 2-Pair & 4-Pair Output Power
•  1 MHz I2C Compatible Serial Control Interface
•  Midspan Backoff Timer
•  Supports Proprietary Very High Power up to 100W
•  Available in 38-Pin 5mm x 7mm QFN & 36-Pin SSOP Packages
 

4-channel PoE+ PSE with 0.34Ohm Total Channel Resistance LTC4266 PR Image

Click Photo for High-Res Image