1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar
Media Contacts

Deutsch  |  Français  |   简体中文  |  繁體中文  |  日本語  |  한국어

Dual Output Boost Drives up to 6 White LEDs & an OLED Display from a 2mm x 3mm DFN Package

MILPITAS, CA - June 13, 2007 - Linear Technology announces the LT3498, a dual output boost converter featuring a 2.3MHz PWM LED driver and a low noise OLED driver. The device includes an internal power switch and Schottky diode for each channel, all in 2mm x 3mm DFN package. The LT3498's wide 2.5V to 12V input voltage range enables it to operate from single cell Li-Ion batteries up to fixed 12V input rails, delivering outputs up to 32V. Each of the converters can be independently dimmed or shut down. From a single cell Li-Ion input, the LED driver channel can drive up to six series 20mA white LEDs while the OLED driver can deliver up to 24mA to a 16V output. This highly integrated power solution is ideal for dual display electronic devices.

The LT3498's LED driver uses a 2.3MHz PWM frequency, keeping switching noise out of critical wireless and audio bands. The device also uses a high side current sense topology, providing a one-wire current source for the LED Driver. Similarly, the OLED driver uses a unique control scheme that delivers both high efficiency and low output ripple over a wide load current range. This technique guarantees that the switching frequency stays above the audio band for the entire load range, making it ideal for noise-sensitive applications such as MP3 players and cellular phones. Additional features include open LED protection and OLED output disconnect.

The LT3498EDDB is available from stock in a 12-lead 2mm x 3mm DFN package. Pricing starts at $1.95 each for 1,000-piece quantities.

 
Summary of Features: LT3498
•  Dual Output Boost for Dual Display Devices
•  Drives Up to Six White LEDs & OLED/LCD Bias
•  Internal Power Switches and Schottky Diodes
•  Independent Dimming & Shutdown
•  200mV High Side Sense on LED Driver Allows
"One-Wire Current Source"
•  Wide Input Voltage Range: 2.5V to 12V
•  Wide Output Voltage Range: Up to 32V
•  2.3MHz PWM Frequency for LED Driver
•  PFM for OLED Driver is Non-Audible over
Entire Load Range
•  Open LED Protection
•  OLED Output Disconnect
•  Available in 12-Pin 2mm x 3mm DFN Package
 

Dual Output Boost Drives up to
6 White LEDs & an OLED
LT3498 PR Image

Click Photo for High-Res Image