1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Power Management Switching Regulator Step-Down (Buck) Regulators Multiple Output Buck
Solutions DC Regulator Solutions DC-DC Voltage Regulation Step Down DC-DC Solutions (Vin > Vout)
Solutions µModule Solutions µModule Regulators µModule Buck Regulators

DC2249A - LTM4622EV Demo Board | Ultrathin Dual Step-Down μModule Regulator, 3.6V ≤ VIN ≤ 20V, Vout1/Vout2 = 3.3V/1.2V @ 2.5A

Demonstration Circuit 2249A features the LTM®4622EV μModule® regulator, a tiny low profile high performance high efficiency dual step-down regulator. The LTM4622 has an operating input voltage range of 3.6V to 20V and is able to provide an output current of up to 2.5A for each channel. Each output’s voltage is programmable from 0.6V to 5.5V. The LTM4622 is a complete DC-DC point of load regulator in a low profile thermally enhanced 6.25mm × 6.25mm × 1.82mm LGA package requiring only a few input and output capacitors. Output voltage tracking is available through the TRACK/SS pin for supply rail sequencing.

DC2249A - Schematic

 


Software

LTspice

LTspice® software is a powerful, fast and free simulation tool, schematic capture and waveform viewer with enhancements and models for improving the simulation of switching regulators. Click here to download LTspice

To launch a ready to run LTspice demonstration circuit for this part:

  • Step 1: If you have not installed LTspice on this computer, download and install LTspice
  • Step 2: Once LTspice is installed, click on the link(s) below to launch the simulation
  • Step 3: If LTspice does not automatically open after clicking the link above, you can instead run the simulation by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTspice and open the demonstration circuit by selecting 'Open' from the 'File' menu

To explore other ready to run LTspice demonstration circuits, please visit our Demo Circuits Collection.

LTpowerCAD

The LTpowerCAD design tool is a complete power supply design tool program that can significantly ease the tasks of power supply design. It guides users to a solution, selects power stage components, provides detailed power efficiency, shows quick loop bode plot stability and load transient analysis, and can export a final design to LTspice for simulation. Click here to download LTpowerCAD

To open the project file for this circuit:

  • Step 1: If you have not installed LTpowerCAD on this computer, download and install LTpowerCAD
  • Step 2: Once LTpowerCAD is installed, click on the link(s) below to open the project file
  • Step 3: If LTpowerCAD does not automatically open after clicking the link above, you can open the project file by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTpowerCAD and open the project file by selecting 'Open Project' from the 'File' menu

View More Step Down DC-DC Solutions (Vin > Vout) Solutions

LTM4622 1.5V and 1V Dual Output DC/DC Step-Down Ultrathin uModule Regulator
LTC3774EUHE Demo Board | Sync Buck Controller, 4-Phase (LTC3774 x2), 10V ≤ VIN ≤ 14V, Vout = 1.2V @ 120A

View All - List View • Table View