1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions Power Management Switching Regulator Step-Down (Buck) Regulators Internal Power Switch Buck
Solutions Power Management Switching Regulator Step-Down (Buck) Regulators High Input Voltage Buck
Solutions Power Management Switching Regulator Step-Down (Buck) Regulators Multiple Output Buck
Solutions DC Regulator Solutions DC-DC Voltage Regulation Step Down DC-DC Solutions (Vin > Vout)
Solutions Power Management Switching Regulator Step-Down (Buck) Regulators Micropower Buck Regulators
Solutions Space & Harsh Environment Extended Temperature Plastic (H & MP) Extended Temperature (H & MP) Switching Regulators

DC2169A - LT8616EFE Demo Board | Dual Sync Buck, 4.1V ≤ VIN ≤ 42V, Vout1 = 5V @ 1.5A, Vout2 = 3.3V @ 2.5A

Demonstration circuit 2169A is a dual monolithic step-down DC/DC switching regulator featuring the LT®8616. The LT8616 is a high efficiency, high speed, dual synchronous monolithic step-down switching regulator that consumes only 6.5μA of quiescent current with both channels enabled. The demo circuit is designed for 5V, 1.5A and 3.3V, 2.5A outputs. Both channels contain all switches and necessary circuitry to minimize the external components and solution size. Fast minimum ON time of 35ns enables high VIN to low VOUT conversion at high switching frequency. Independent input voltage, feedback, soft-start and power good pins for each channel simplify complex power supply tracking/sequencing requirements.

DC2169A - Schematic

 


Software

LTspice

LTspice® software is a powerful, fast and free simulation tool, schematic capture and waveform viewer with enhancements and models for improving the simulation of switching regulators. Click here to download LTspice

To launch a ready to run LTspice demonstration circuit for this part:

  • Step 1: If you have not installed LTspice on this computer, download and install LTspice
  • Step 2: Once LTspice is installed, click on the link(s) below to launch the simulation
  • Step 3: If LTspice does not automatically open after clicking the link above, you can instead run the simulation by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTspice and open the demonstration circuit by selecting 'Open' from the 'File' menu

To explore other ready to run LTspice demonstration circuits, please visit our Demo Circuits Collection.

LTpowerCAD

The LTpowerCAD design tool is a complete power supply design tool program that can significantly ease the tasks of power supply design. It guides users to a solution, selects power stage components, provides detailed power efficiency, shows quick loop bode plot stability and load transient analysis, and can export a final design to LTspice for simulation. Click here to download LTpowerCAD

To open the project file for this circuit:

  • Step 1: If you have not installed LTpowerCAD on this computer, download and install LTpowerCAD
  • Step 2: Once LTpowerCAD is installed, click on the link(s) below to open the project file
  • Step 3: If LTpowerCAD does not automatically open after clicking the link above, you can open the project file by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTpowerCAD and open the project file by selecting 'Open Project' from the 'File' menu

View More Step Down DC-DC Solutions (Vin > Vout) Solutions

LTC3622EMSE Demo Board (MSOP) | Dual Sync Buck, 2.7V ≤ VIN ≤ 17V, Vout1 = 1.2V/1.8V/2.5V @ 1A, Vout2 = 3.3V/5V @ 1A
LTC3774EUHE Demo Board | Sync Buck Controller, 4-Phase (LTC3774 x2), 10V ≤ VIN ≤ 14V, Vout = 1.2V @ 120A

View All - List View • Table View