1. Skip to navigation
  2. Skip to content
  3. Skip to sidebar

Solutions DC Regulator Solutions DC-DC Voltage Regulation Step Up-Step Down DC-DC Solutions (Vout > and < Vin)
Solutions Power Management Switching Regulator Buck-Boost Regulators µModule Buck-Boost Regulators

DC1601B-A - LTM4607EV Demo Board | LTM4607(x2) Buck-Boost uModule, 6V ≤ VIN ≤ 36V, Vout = 12V @ 10A

Demonstration circuit DC1601B is a PolyPhase® power supply featuring the LTM®4607 power module, a complete high efficiency switching mode buck-boost power supply. The DC1601B input voltage range is from 6V to 36V and is capable of delivering high power through paralleled LTM4607 modules. The demo circuit can deliver up to 10A of output current for two paralleled modules (DC1601B-A). The DC1601B demonstrates that paralleling modules is easy and reliable. The output voltage for the board is 12V. The rated load current per module is 5A in boost mode, however current derating may be necessary under certain VIN, VOUT, frequency, and thermal conditions. An onboard external clock is provided for synchronization and interleaving of phases to minimize input and output ripple. An internal phase-locked loop allows the LTM4607 to be synchronized to an external clock within the range of 200kHz to 400kHz. The LTM4607 default switching frequency on the DC1601B is set to 300kHz through the onboard LTC6902 clock generator which interleaves the paralleled phases.

DC1601B-C - Schematic

 


Software

LTpowerCAD

The LTpowerCAD design tool is a complete power supply design tool program that can significantly ease the tasks of power supply design. It guides users to a solution, selects power stage components, provides detailed power efficiency, shows quick loop bode plot stability and load transient analysis, and can export a final design to LTspice for simulation. Click here to download LTpowerCAD

To open the project file for this circuit:

  • Step 1: If you have not installed LTpowerCAD on this computer, download and install LTpowerCAD
  • Step 2: Once LTpowerCAD is installed, click on the link(s) below to open the project file
  • Step 3: If LTpowerCAD does not automatically open after clicking the link above, you can open the project file by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTpowerCAD and open the project file by selecting 'Open Project' from the 'File' menu

View More Step Up-Step Down DC-DC Solutions (Vout > and < Vin) Solutions

LTC3115-1 Demo Board | Sync Buck-Boost, 2.7V ≤ VIN ≤ 40V, Vout = 5V @ Up to 2A
LTC3119 Demo Board | Sync Buck-Boost, 2.5V ≤ VIN ≤ 18V, VOUT = 5V @ Up to 5A

View All - List View • Table View