RH1016M - UltraFast Precision 10ns Comparator

Typical Application

Description

The RH1016 is an UltraFast 10ns comparator that interfaces directly to TTL/CMOS logic while operating from either ±5V or single 5V supplies. Tight offset voltage specifications and high gain allow the RH1016 to be used in precision applications. Matched complementary outputs further extend the versatility of this comparator.

A unique output stage provides active drive in both directions for maximum speed into TTL/CMOS logic or passive loads, yet does not exhibit the large current spikes found in conventional output stages. This allows the RH1016 to remain stable with the outputs in the active region which greatly reduces the problem of output “glitching” when the input signal is slow moving or is low level.

The RH1016 has a LATCH pin which will retain input data at the outputs, when held high. Quiescent negative power supply current is only 3mA. This allows the negative supply pin to be driven from virtually any supply voltage with a simple resistive divider. Device performance is not affected by variations in negative supply voltage.

The wafer lots are processed to Linear Technology’s in-house Class S flow to yield circuits usable in stringent military applications.

People Who Viewed This Product Also Viewed

• LT1016 - Ultra Fast Precision 10ns Comparator
• LT1028 - Ultra Low Noise Precision High Speed Op Amps
• LT3080 - Adjustable 1.1A Single Resistor Low Dropout Regulator
• RH1011 - Voltage Comparator
• RH119 - High Performance Dual Comparator
• LT6105 - Precision, Rail-to-Rail Input Current Sense Amplifier
• RH6200M - Low Noise, High Speed Rail-to-Rail Op Amp
• LTC6752 - 280MHz, 2.9ns Comparator Family with Rail-to-Rail Inputs and CMOS Outputs
• RH3845 - Radiation Hardened High Voltage Synchronous Step-Down Controller
• LT1719 - 4.5ns Single/Dual Supply 3V/5V Comparator with Rail-to-Rail Output