LTC5800-IPM - SmartMesh IP Wireless 802.15.4e System-on-Chip
Features
- 72-pin 10mm x 10mm QFN package
- 2.4 GHz, IEEE 802.15.4e System-on-Chip, Complete with Embedded SmartMesh Networking Software
- >99.999% Network Reliability in the Most Challenging RF Environments
- Sub 50µA Routing Nodes
- Serves as either a Wireless Mote, EManager, or Access Point Mote in a SmartMesh IP network
- These products contain encryption. Import/export restrictions may apply
Description
SmartMesh IP wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes. The LTC®5800-IPM is the SmartMesh IP integrated circuit in the Eterna® family of IEEE 802.15.4e System-on-Chip (SoC) solutions, featuring a highly integrated, low power radio design as well as an ARM Cortex-M3 32-bit microprocessor running SmartMesh IP embedded networking software.
With SmartMesh IP time-synchronized networks, all motes in the network may route, source or terminate data, while providing many years of battery powered operation. SmartMesh IP is a highly flexible network with proven reliability and low power performance in an easy-to-integrate platform.
The LTC5800-IPM’s behavior in a SmartMesh IP network is determined by the choice of SmartMesh IP network software loaded: Wireless Mote, EManager, or Access Point Mote in a SmartMesh IP network. The SmartMesh IP software provided with the LTC5800-IPM is fully tested and validated, and is readily configured via a software Application Programming Interface. Once you have purchased SmartMesh IP products, the SmartMesh IP stack binaries may be downloaded via your myLinear account. Please fill out a request form here to enable access.
The pin signaling behavior of the LTC5800*WR-IPMA hardware is determined by the software loaded and is described in detail in the following product datasheets:
|
LTC5800-IPM |
= |
LTC5800*WR-IPMA hardware |
+ |
SmartMesh IP Mote Software |
→ |
|
|
LTC5800-IPR
|
= |
LTC5800*WR-IPMA hardware |
+ |
SmartMesh IP EManager Software |
→ |
|
|
LTC5800-IPA
|
= |
LTC5800*WR-IPMA hardware |
+ |
SmartMesh IP Access Point Software |
→ |
|
Network Features |
|
|
Feature |
Benefit |
|
>99.999% Network Reliability |
Avoids communications dropouts common with other wireless networks |
|
Data protected by end-to-end encryption, message integrity checking and device authentication |
|
|
Scalable |
Uses time-slotted channel-hopping protocol to avoid in-network collisions to maximize scale while minimizing power and latency-hungry transmission retries due to congestion |
|
Bidirectional Communications |
Ideal for both monitoring and control applications |
|
Up to 10 messages/second/node |
Time-slotted communications avoids contention. This data rate includes built-in margin for packet retries. |
|
Device Features |
|
|
Feature |
Benefit |
|
Industry-Leading Low Power Radio Technology |
• 4.5mA to Receive a Packet |
|
Pre-engineered RF |
RF elements include an on-chip power amplifier and are pre-tuned for optimized performance, including temperature compensation, saving development time. |
|
Energy Harvesting Support |
Very low power design enables motes to be powered by a wide variety of energy harvesters. Click here to see a demonstration circuit of a SmartMesh IP mote powered by indoor light. |
|
Integrated Temperature Sensor |
Precise temperature sensor is integrated directly into the mote. |
Packaging
CAD Symbols and Footprints: The downloadable Zip file below contains the schematic symbol and PCB footprints.
For complete and up to date package information and drawings, please refer to our packaging page
| Part Number | Package | Code | Temp | Package Drawing |
RoHS |
|---|---|---|---|---|---|
| LTC5800HWR-IPMA#PBF | 10x10 QFN-72 | WR | H | 05-08-1930 | Yes |
| LTC5800IWR-IPMA#PBF | 10x10 QFN-72 | WR | I | 05-08-1930 | Yes |
Order Info
- Part numbers ending in PBF are lead free. Solder plated terminal finish (SnPb) versions are non-standard and special terms and conditions and pricing applies if available. Please contact LTC marketing for information.
- Part numbers containing TR or TRM are shipped in tape and reel or 500 unit mini tape and reel, respectively
- Please refer to our general ordering information or the product datasheet for more details
Package Variations and Pricing
| Part Number | Package | Temp | Price (1-99) |
Price (1k)* |
RoHS | |
|---|---|---|---|---|---|---|
| LTC5800HWR-IPMA#PBF | 10x10 QFN-72 | H | $24.53 | $18.04 | Yes | |
| LTC5800IWR-IPMA#PBF | 10x10 QFN-72 | I | $22.30 | $16.40 | Yes | |
| Buy Now • Request Samples | ||||||
Demo Boards
Linear Technology offers many demo boards free of charge to qualified customers. Contact your local sales office or distributor to inquire about a demo board. Certain demo boards are also available for sale via credit card on this website. Demo boards are for evaluation purposes only. It remains the customer’s responsibility to verify proper and reliable operation in the actual end application.| Part Number | Description | Price | Documentation |
|---|---|---|---|
| DC9000B | SmartMesh IP Starter Kit (chip antennae), 100 mote capacity | $750.00 | |
| DC9021A | SmartMesh IP RF Certified Starter Kit (chip antennae), 100 mote capacity | $875.00 | |
| DC9021B | SmartMesh IP Starter Kit | $750.00 | |
| Buy Now | |||
Companion Boards
| Part Number | Description | Price | Documentation |
|---|---|---|---|
| DC2126A | High-Accuracy Wireless Temperature Sensor with Solar Battery Life Extender | $175.00 | |
| DC2274A-A | SmartMesh IP USB Network Manager, 100 mote capacity | $125.00 | |
| DC9001B | SmartMesh IP Eval/Dev Manager (chip antenna), 100 mote capacity | $250.00 | |
| DC9003A-B | SmartMesh IP Eval/Dev Mote (chip antenna) | $100.00 | |
| DC9006A | Eterna Interface Card | $100.00 | |
| DC9010B | Eterna Serial Programmer | $399.00 | |
| DC9018A-B | SmartMesh IP RF Certified Eval/Dev Mote (chip antenna) | $120.00 | |
| DC9018B-B | SmartMesh IP RF Certified Eval/Dev Mote (MMCX antenna connector with 2dBi Dipole antenna) | $100.00 | |
| DC9020A | SmartMesh IP RF Certified Eval/Dev Manager (chip antenna), 100 mote capacity | $275.00 | |
| DC9020B | SmartMesh IP RF Certified Eval/Dev Manager (MMCX antenna connector), 100 mote capacity | $275.00 | |
| Buy Now | |||
Applications
SmartMesh IP is ideally suited for wireless Industrial Internet of Things (IoT) applications. To learn more about SmartMesh applications, click here
People Who Viewed This Product Also Viewed
- LTP5901-IPM - SmartMesh IP Wireless 802.15.4e PCBA Module with Chip Antenna
- LTC5800-WHM SmartMesh WirelessHART Mote-on-Chip
- LT3652 - Power Tracking 2A Battery Charger for Solar Power
- LTP5902-IPM - SmartMesh IP Wireless 802.15.4e PCBA Module with Antenna Connector
- LTP5900-WHM - SmartMesh WirelessHART Mote Module (22-pin PCBA)
- LT8490 - High Voltage, High Current Buck-Boost Battery Charge Controller with Maximum Power Point Tracking (MPPT)
- LT3042 - 20V, 200mA, Ultralow Noise, Ultrahigh PSRR RF Linear Regulator
- LTC2380-24 - 24-Bit, 1.5Msps/2Msps, Low Power SAR ADC with Integrated Digital Filter
- LTC3105 - 400mA Step-Up DC/DC Converter with Maximum Power Point Control and 250mV Start-Up
- LT4320/LT4320-1 - Ideal Diode Bridge Controller
Product Notifications
Please login to your MyLinear account for notifications of datasheet updates, new document releases and LTspice model announcements for your favorite products. If you do not have a MyLinear account you may Sign Up Now.
Forgot your password? Click here.
Need help? Email mylinear@linear.com with questions and comments.
Technical Support
- For immediate technical assistance, contact your local sales office or distributor or call 1-800-4-LINEAR (US customers only) or 408-432-1900.
- For less urgent requests, please complete our Technical Support Request Form. Please allow 2-3 business days for reply.
Design Tools
Linear Technology provides a variety of custom design simulation tools and device models to allow even novice designers to quickly and easily evaluate circuits using high performance switching regulators, amplifiers, data converters, filters and more. Please visit our Design Tools page to view and download:
- LTspice - A powerful SPICE simulator, schematic capture and waveform viewer with enhancements and models for easing the simulation of switching regulators
- LTpowerCAD - A complete power supply selection, synthesis and design tool
- LTpowerPlay - A development environment supporting Linear Technology's Digital Power System Management (PSM) products
- PScope & QuikEval - USB-based product demonstration and data acquisition system for use with our ADCs, DACs, and more
- Linduino - Arduino compatible system for developing and distributing firmware libraries and example code
- LinearLab Tools - A collection of Matlab and Python programs that provide direct access to Linear Technology’s data converter evaluation boards
- And More!
SmartMesh
