LTC4413-1 and -2 - Dual 2.6A, 2.5V to 5.5V Fast Ideal Diodes in a 3mm x 3mm DFN


  • 2-Channel Ideal Diode OR’ing or Load Sharing
  • Low Loss Replacement for PowerPath™ OR’ing Diodes
  • Fast Response Replacement for LTC4413
  • Low Forward On Resistance (140mΩ Max at 3.6V)
  • Low Reverse Leakage Current
  • Low Regulated Forward Voltage (18mV Typ)
  • Overvoltage Protection Sensor with Drive Output for an External P-Channel MOSFET (LTC4413-2 Only)
  • 2.5V to 5.5V Operating Range
  • 2.6A Maximum Forward Current
  • Internal Current Limit Protection
  • Internal Thermal Protection
  • Status Output to Indicate if Selected Channel is Conducting
  • Programmable Channel On/Off
  • Low Profile (0.75mm) 10-Lead 3mm × 3mm DFN Package

Typical Application

LTC4413-1 Typical Application
LTC4413-1 Typical Application


The LTC4413-1 and LTC4413-2 each contain two monolithic ideal diodes, each capable of supplying up to 2.6A from input voltages between 2.5V and 5.5V. The ideal diodes use a 100mΩ P-channel MOSFET to independently connect INA to OUTA and INB to OUTB. During normal forward operation, the voltage drops across each of these diodes are regulated to as low as 18mV. Quiescent current is less than 80µA for diode currents up to 1A. If either of the output voltages exceeds its respective input voltage, that MOSFET is turned off and less than 1µA of reverse current fl ows from OUT to IN. Maximum forward current in each MOSFET is limited to a constant 2.6A and internal thermal limiting circuits protect the part during fault conditions. An internal overvoltage protection sensor detects when a voltage exceeds the LTC4413-2 absolute maximum voltage tolerance.

Two active-high control pins independently turn off the two ideal diodes contained within the LTC4413-1/LTC4413-2. When the selected channel is reverse biased, or the LTC4413-1/LTC4413-2 is put into low power standby, the status signal is pulled low by an 11µA open drain.

The LTC4413-1/LTC4413-2 are housed in a 10-lead 3mm × 3mm DFN package.

LTC4413 Lower Iq
LTC4413-1 Lower Vfwd, Faster Response, Higher Iq
LTC4413-2 Lower Vfwd, Faster Response, Higher Iq, 13V (max) OVP


CAD Symbols and Footprints: The downloadable Zip file below contains the schematic symbol and PCB footprints.

For complete and up to date package information and drawings, please refer to our packaging page

Part Number Package Code Temp Package
LTC4413EDD-1#PBF 3x3 DFN-10 DD E 05-08-1699 Yes
LTC4413EDD-1#TRPBF 3x3 DFN-10 DD E 05-08-1699 Yes
LTC4413EDD-2#PBF 3x3 DFN-10 DD E 05-08-1699 Yes
LTC4413EDD-2#TRPBF 3x3 DFN-10 DD E 05-08-1699 Yes

LTC4413-1 Package Drawing
LTC4413-1 Package Drawing

Order Info

  • Part numbers ending in PBF are lead free. Solder plated terminal finish (SnPb) versions are non-standard and special terms and conditions and pricing applies if available. Please contact LTC marketing for information.
  • Part numbers containing TR or TRM are shipped in tape and reel or 500 unit mini tape and reel, respectively
  • Please refer to our general ordering information or the product datasheet for more details

Package Variations and Pricing

Part Number Package Temp Price
LTC4413EDD-1#PBF 3x3 DFN-10 E $3.07 $2.15 Yes
LTC4413EDD-1#TRPBF 3x3 DFN-10 E $2.25 Yes
LTC4413EDD-2#PBF 3x3 DFN-10 E $3.21 $2.25 Yes
LTC4413EDD-2#TRPBF 3x3 DFN-10 E $2.35 Yes
Buy NowRequest Samples
* The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Linear Technology sales office or authorized distributor.

Demo Boards

Linear Technology offers many demo boards free of charge to qualified customers. Contact your local sales office or distributor to inquire about a demo board. Certain demo boards are also available for sale via credit card on this website. Demo boards are for evaluation purposes only. It remains the customer’s responsibility to verify proper and reliable operation in the actual end application.

Click here to view our complete list of demo boards


  • Battery and Wall Adapter Diode OR’ing in Handheld Products
  • Backup Battery Diode OR’ing
  • Power Switching
  • USB Peripherals
  • Uninterruptable Supplies

Product Notifications

Please login to your MyLinear account for notifications of datasheet updates, new document releases and LTspice model announcements for your favorite products. If you do not have a MyLinear account you may Sign Up Now.

Forgot your password? Click here.
Need help? Email with questions and comments.

Design Tools


LTspice® software is a powerful, fast and free simulation tool, schematic capture and waveform viewer with enhancements and models for improving the simulation of switching regulators. Click here to download LTspice

Models for the following parts are available in LTspice:

Technical Support