LTC3890-2 - 60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller
Features
- Wide VIN Range: 4V to 60V (65V Abs Max)
- Low Operating IQ: 50μA (One Channel On)
- Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 24V
- RSENSE or DCR Current Sensing
- Out-of-Phase Controllers Reduce Input Capacitance and Power Supply Induced Noise
- Phase-Lockable Frequency (75kHz to 850kHz)
- Programmable Fixed Frequency (50kHz to 900kHz)
- Selectable Continuous, Pulse-Skipping or Low Ripple Burst Mode® Operation at Light Loads
- Selectable Current Limit
- Very Low Dropout Operation: 99% Duty Cycle
- Adjustable Output Voltage Soft-Start or Tracking
- Power Good Output Voltage Monitors
- Low Shutdown IQ : < 14μA
- Internal LDO Powers Gate Drive from VIN or EXTVCC
- Small Low Profile (0.75mm) 5mm × 5mm QFN Package
AEC-Q100 data available for specific packages
Typical Application
Description
The LTC®3890-2 is a high performance dual step-down switching regulator DC/DC controller that drives all N-channel synchronous power MOSFET stages. A constant frequency current mode architecture allows a phaselockable frequency of up to 850kHz. Power loss and noise due to the ESR of the input capacitor are minimized by operating the two controller output stages out-of-phase.
The 50μA no-load quiescent current extends operating run time in battery-powered systems. OPTI-LOOP® compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. A wide 4V to 60V input supply range encompasses a wide range of intermediate bus voltages and battery chemistries.
Independent TRACK/SS pins for each controller ramp the output voltages during start-up. Current mode control limits the inductor current during short-circuit conditions. The PLLIN/MODE pin selects among Burst Mode operation, pulse-skipping mode, or continuous conduction mode at light loads. For versions with different and/or additional features, see the LTC3890 family summary, Table 1, in the Pin Functions section of this data sheet.
| LTC3890 | LTC3890-1 | LTC3890-2 | LTC3890-3 | |
|---|---|---|---|---|
| Adjustable Current Limit | Yes | No | Yes | No |
| CLKOUT/PHASMD for Multiphase Operation |
Yes | No | Yes | No |
| Number of PGood Outputs |
2 | 1 | 2 | 1 |
| OVP – Bottom Gate Crowbar |
Yes | Yes | No | No |
| Current Limit Foldback | Yes | Yes | No | No |
| Light Load Operation when Synced to External Clock |
Forced Continuous | Forced Continuous | Pulse Skipping | Pulse Skipping |
| SENSE Pins Common Mode Range |
Common Mode < 0.5V Requires VFB < 0.65V |
Common Mode < 0.5V Requires VFB < 0.65V |
Not Dependant on VFB. Easy to make a non-synchronous Boost or SEPIC |
Not Dependant on VFB. Easy to make a non-synchronous Boost or SEPIC |
| Package | 5X5 QFN-32 | SSOP-28 | 5X5 QFN-32 | SSOP-28 |
Packaging
CAD Symbols and Footprints: The downloadable Zip file below contains the schematic symbol and PCB footprints.
For complete and up to date package information and drawings, please refer to our packaging page
| Part Number | Package | Code | Temp | Package Drawing |
RoHS |
|---|---|---|---|---|---|
| LTC3890EUH-2#PBF | 5x5 QFN-32 | UH | E | 05-08-1693 | Yes |
| LTC3890EUH-2#TRPBF | 5x5 QFN-32 | UH | E | 05-08-1693 | Yes |
| LTC3890HUH-2#PBF | 5x5 QFN-32 | UH | H | 05-08-1693 | Yes |
| LTC3890HUH-2#TRPBF | 5x5 QFN-32 | UH | H | 05-08-1693 | Yes |
| LTC3890IUH-2#PBF | 5x5 QFN-32 | UH | I | 05-08-1693 | Yes |
| LTC3890IUH-2#TRPBF | 5x5 QFN-32 | UH | I | 05-08-1693 | Yes |
| LTC3890MPUH-2#PBF | 5x5 QFN-32 | UH | MP | 05-08-1693 | Yes |
| LTC3890MPUH-2#TRPBF | 5x5 QFN-32 | UH | MP | 05-08-1693 | Yes |
Order Info
- Part numbers ending in PBF are lead free. Solder plated terminal finish (SnPb) versions are non-standard and special terms and conditions and pricing applies if available. Please contact LTC marketing for information.
- Part numbers containing TR or TRM are shipped in tape and reel or 500 unit mini tape and reel, respectively
- Please refer to our general ordering information or the product datasheet for more details
Package Variations and Pricing
| Part Number | Package | Temp | Price (1-99) |
Price (1k)* |
RoHS | |
|---|---|---|---|---|---|---|
| LTC3890EUH-2#PBF | 5x5 QFN-32 | E | $6.56 | $4.59 | Yes | |
| LTC3890EUH-2#TRPBF | 5x5 QFN-32 | E | $4.65 | Yes | ||
| LTC3890HUH-2#PBF | 5x5 QFN-32 | H | $7.99 | $5.59 | Yes | |
| LTC3890HUH-2#TRPBF | 5x5 QFN-32 | H | $5.65 | Yes | ||
| LTC3890IUH-2#PBF | 5x5 QFN-32 | I | $7.56 | $5.29 | Yes | |
| LTC3890IUH-2#TRPBF | 5x5 QFN-32 | I | $5.35 | Yes | ||
| LTC3890MPUH-2#PBF | 5x5 QFN-32 | MP | $22.51 | $15.76 | Yes | |
| LTC3890MPUH-2#TRPBF | 5x5 QFN-32 | MP | $15.82 | Yes | ||
| Buy Now • Request Samples | ||||||
Demo Boards
Linear Technology offers many demo boards free of charge to qualified customers. Contact your local sales office or distributor to inquire about a demo board. Certain demo boards are also available for sale via credit card on this website. Demo boards are for evaluation purposes only. It remains the customer’s responsibility to verify proper and reliable operation in the actual end application.| Part Number | Description | Price | Documentation |
|---|---|---|---|
| DC2236A-A | LTC3890EUH-2 Demo Board | 16V ≤ VIN ≤ 60V; VOUT = 12V @ 25A | $200.00 | |
| Buy Now | |||
Designed for Automotive and Transportation Applications
AEC-Q100 data is available for these specific part numbers. Please contact your local sales representative for more information regarding reliability reports or to inquire about parts that are not included. For more information, view our Automotive and Transportation page
| Part Number | Package | Temp | Price (1-99) |
Price (1k)* |
RoHS | |
|---|---|---|---|---|---|---|
| LTC3890HUH-2#PBF | 5x5 QFN-32 | H | $7.99 | $5.59 | Yes | |
| LTC3890HUH-2#TRPBF | 5x5 QFN-32 | H | $5.65 | Yes | ||
| LTC3890IUH-2#PBF | 5x5 QFN-32 | I | $7.56 | $5.29 | Yes | |
| LTC3890IUH-2#TRPBF | 5x5 QFN-32 | I | $5.35 | Yes | ||
| LTC3890MPUH-2#PBF | 5x5 QFN-32 | MP | $22.51 | $15.76 | Yes | |
| LTC3890MPUH-2#TRPBF | 5x5 QFN-32 | MP | $15.82 | Yes | ||
| Buy Now • Request Samples | ||||||
Applications
- Automotive Always-On Systems
- Battery Operated Digital Devices
- Distributed DC Power Systems
People Who Viewed This Product Also Viewed
- LTC3890 - 60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller
- LTC3890-1 - 60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller
- LT8705 - 80V VIN and VOUT Synchronous 4-Switch Buck- Boost DC/DC Controller
- LTC3890-3 - 60V Low IQ, Dual, 2-Phase Synchronous Step-Down DC/DC Controller
- LTC3891 - Low IQ, 60V Synchronous Step-Down Controller
- LTC3789 - High Efficiency, Synchronous, 4-Switch Buck-Boost Controller
- LT3796/LT3796-1 - 100V Constant-Current and Constant-Voltage Controller with Dual Current Sense
- LTC4364 - Surge Stopper with Ideal Diode
- LT4363 - High Voltage Surge Stopper with Current Limit
- LTC3864 - 60V Low IQ Step-Down DC/DC Controller with 100% Duty Cycle Capability
Product Notifications
Please login to your MyLinear account for notifications of datasheet updates, new document releases and LTspice model announcements for your favorite products. If you do not have a MyLinear account you may Sign Up Now.
Forgot your password? Click here.
Need help? Email mylinear@linear.com with questions and comments.
Design Tools
LTspice
LTspice® software is a powerful, fast and free simulation tool, schematic capture and waveform viewer with enhancements and models for improving the simulation of switching regulators. Click here to download LTspice
To launch a ready to run LTspice demonstration circuit for this part:
- Step 1: If you have not installed LTspice on this computer, download and install LTspice
- Step 2: Once LTspice is installed, click on the link(s) below to launch the simulation
- Step 3: If LTspice does not automatically open after clicking the link above, you can instead run the simulation by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTspice and open the demonstration circuit by selecting 'Open' from the 'File' menu
To explore other ready to run LTspice demonstration circuits, please visit our Demo Circuits Collection.
Models for the following parts are available in LTspice:
LTC3890
LTC3890-1
LTC3890-2
LTC3890-3
LTpowerCAD
The LTpowerCAD design tool is a complete power supply design tool program that can significantly ease the tasks of power supply design. It guides users to a solution, selects power stage components, provides detailed power efficiency, shows quick loop bode plot stability and load transient analysis, and can export a final design to LTspice for simulation. Click here to download LTpowerCAD
To open the project file for this circuit:
- Step 1: If you have not installed LTpowerCAD on this computer, download and install LTpowerCAD
- Step 2: Once LTpowerCAD is installed, click on the link(s) below to open the project file
- Step 3: If LTpowerCAD does not automatically open after clicking the link above, you can open the project file by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTpowerCAD and open the project file by selecting 'Open Project' from the 'File' menu
Design tools for the following parts are available in LTpowerCAD:
LTC3890
LTC3890 Parallel
LTC3890-1
LTC3890-2
LTC3890-2 Parallel
Technical Support
- For immediate technical assistance, contact your local sales office or distributor or call 1-800-4-LINEAR (US customers only) or 408-432-1900.
- For less urgent requests, please complete our Technical Support Request Form. Please allow 2-3 business days for reply.
