LTC3880 - Dual Output PolyPhase Step-Down DC/DC Controller with Digital Power System Management

/*!
Linear Technology DC1590B Demonstration Board
LTC3880: Dual Output PolyPhase Step-Down DC/DC Controller with Digital Power System Management

@verbatim

NOTES
  Setup:
   Set the terminal baud rate to 115200 and select the newline terminator.

@endverbatim

http://www.linear.com/product/LTC3880

http://www.linear.com/demo/DC1590B

REVISION HISTORY
$Revision: 4467 $
$Date: 2015-12-02 11:28:55 -0800 (Wed, 02 Dec 2015) $

Copyright (c) 2014, Linear Technology Corp.(LTC)
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those
of the authors and should not be interpreted as representing official policies,
either expressed or implied, of Linear Technology Corp.

The Linear Technology Linduino is not affiliated with the official Arduino team.
However, the Linduino is only possible because of the Arduino team's commitment
to the open-source community.  Please, visit http://www.arduino.cc and
http://store.arduino.cc , and consider a purchase that will help fund their
ongoing work.
*/

/*! @file
    @ingroup LTC3880
*/

#include <Arduino.h>
#include <stdint.h>
#include "Linduino.h"
#include "UserInterface.h"
#include "LT_I2CBus.h"
#include "LT_SMBusNoPec.h"
#include "LT_SMBusPec.h"
#include "LT_PMBus.h"

#define LTC3880_I2C_ADDRESS 0x4F

// Global variables
static uint8_t ltc3880_i2c_address;
static LT_SMBus *smbus = new LT_SMBusNoPec();
static LT_PMBus *pmbus = new LT_PMBus(smbus);

//! Initialize Linduino
//! @return void
void setup()
{
  Serial.begin(115200);         //! Initialize the serial port to the PC
  print_title();
  ltc3880_i2c_address = LTC3880_I2C_ADDRESS;
  pmbus->disablePec(ltc3880_i2c_address);
  print_prompt();
}

//! Repeats Linduino loop
//! @return void
void loop()
{
  uint8_t user_command;
  uint8_t res;
  uint8_t model[7];
  uint8_t *addresses = NULL;

  if (Serial.available())                          //! Checks for user input
  {
    user_command = read_int();                     //! Reads the user command
    if (user_command != 'm')
      Serial.println(user_command);

    switch (user_command)                          //! Prints the appropriate submenu
    {
      case 1:
        menu_1_basic_commands();                 // Print single-ended voltage menu
        break;
      case 2:
        pmbus->readModel(ltc3880_i2c_address, model);
        Serial.print(F("MODEL "));
        Serial.print((char *)model);
        Serial.println();
        break;
      case 3:
        res = pmbus->readPmbusRevision(ltc3880_i2c_address);
        Serial.print(F("REVISION "));
        Serial.println(res, HEX);
        break;
      case 4:
        pmbus->enablePec(ltc3880_i2c_address);
        delete smbus;
        delete pmbus;
        smbus = new LT_SMBusPec();
        pmbus = new LT_PMBus(smbus);
        break;
      case 5:
        pmbus->disablePec(ltc3880_i2c_address);
        delete smbus;
        delete pmbus;
        smbus = new LT_SMBusNoPec();
        pmbus = new LT_PMBus(smbus);
        break;
      case 6:
        addresses = smbus->probe(0);
        while (*addresses != 0)
        {
          Serial.print(F("ADDR 0x"));
          Serial.println(*addresses++, HEX);
        }
        break;
      case 7 :
        pmbus->resetGlobal();
        break;
      default:
        Serial.println(F("Incorrect Option"));
        break;
    }
    print_prompt();
  }

}

// Function Definitions

//! Prints the title block when program first starts.
void print_title()
{
  Serial.print(F("\n*****************************************************************\n"));
  Serial.print(F("* DC1590B Demonstration Program                                 *\n"));
  Serial.print(F("*                                                               *\n"));
  Serial.print(F("* This program demonstrates how to send and receive data from   *\n"));
  Serial.print(F("* the DC1590B demo board.                                       *\n"));
  Serial.print(F("*                                                               *\n"));
  Serial.print(F("* Set the baud rate to 115200 and select the newline terminator.*\n"));
  Serial.print(F("*                                                               *\n"));
  Serial.print(F("*****************************************************************\n"));
}

//! Prints main menu.
void print_prompt()
{
  Serial.print(F("\n  1-Basic Commands\n"));
  Serial.print(F("  2-Model Number\n"));
  Serial.print(F("  3-Revision Number\n"));
  Serial.print(F("  4-PEC On\n"));
  Serial.print(F("  5-PEC Off\n"));
  Serial.print(F("  6-Bus Probe\n"));
  Serial.print(F("  7-Reset\n"));
  Serial.print(F("\nEnter a command:"));
}

//! Prints a warning if the demo board is not detected.
void print_warning_prompt()
{
  Serial.println(F("\nWarning: Demo board not detected. Linduino will attempt to proceed."));
}

void print_all_voltages()
{
  float   voltage;
  uint8_t page;

  for (page = 0; page < 2; page++)
  {
    pmbus->setPage(ltc3880_i2c_address, page);
    voltage = pmbus->readVout(ltc3880_i2c_address, false);
    Serial.print(F("LTC3880 VOUT "));
    Serial.println(voltage, DEC);
  }
}

void print_all_currents()
{
  float   current;
  uint8_t page;

  for (page = 0; page < 2; page++)
  {
    pmbus->setPage(ltc3880_i2c_address, page);
    current = pmbus->readIout(ltc3880_i2c_address, false);
    Serial.print(F("LTC3880 IOUT "));
    Serial.println(current, DEC);
  }
}

void print_all_status()
{
  uint8_t b;
  uint16_t w;
  uint8_t page;

  for (page = 0; page < 2; page++)
  {
    Serial.print(F("PAGE "));
    Serial.println(page, DEC);
    pmbus->setPage(ltc3880_i2c_address, page);
    b = pmbus->readStatusByte(ltc3880_i2c_address);
    Serial.print(F("LTC3880 STATUS BYTE 0x"));
    Serial.println(b, HEX);
    w = pmbus->readStatusWord(ltc3880_i2c_address);
    Serial.print(F("LTC3880 STATUS WORD 0x"));
    Serial.println(w, HEX);
  }
}

void sequence_off_on()
{
  pmbus->sequenceOffGlobal();
  delay (2000);
  pmbus->sequenceOnGlobal();
}

void margin_high()
{
  pmbus->marginHighGlobal();
}

void margin_low()
{
  pmbus->marginLowGlobal();
}

void margin_off()
{
  pmbus->sequenceOnGlobal();
}

void menu_1_basic_commands()
{
  uint8_t user_command;

  do
  {
    //! Displays the Read/Write menu
    Serial.print(F("\nRead/Write\n\n"));
    Serial.print(F("  1-Read All Voltages\n"));
    Serial.print(F("  2-Read All Currents\n"));
    Serial.print(F("  3-Read All Status\n"));
    Serial.print(F("  4-Sequence Off/On\n"));
    Serial.print(F("  5-Margin High\n"));
    Serial.print(F("  6-Margin Low\n"));
    Serial.print(F("  7-Margin Off\n"));
    Serial.print(F("  8-ClearFaults\n"));
    Serial.print(F("  m-Main Menu\n"));
    Serial.print(F("\nEnter a command: "));

    user_command = read_int();                              //! Reads the user command
    if (user_command == 'm')                                // Print m if it is entered
    {
      Serial.print(F("m\n"));
    }
    else
      Serial.println(user_command);                         // Print user command

    switch (user_command)
    {
      case 1:
        print_all_voltages();
        break;
      case 2:
        print_all_currents();
        break;
      case 3:
        print_all_status();
        break;
      case 4:
        sequence_off_on();
        break;
      case 5:
        margin_high();
        break;
      case 6:
        margin_low();
        break;
      case 7:
        margin_off();
        break;
      case 8:
        pmbus->clearAllFaults(ltc3880_i2c_address);
      default:
        if (user_command != 'm')
          Serial.println(F("Invalid Selection"));
        break;
    }
  }
  while (user_command != 'm');
}

#include "LT_PMBusDeviceLTC3880.h"

uint32_t LT_PMBusDeviceLTC3880::cap_ =  HAS_VOUT
                                        | HAS_VIN
                                        | HAS_IOUT
                                        | HAS_IIN
                                        | HAS_POUT
                                        | HAS_TEMP
                                        | HAS_DC
                                        | HAS_STATUS_WORD
                                        | HAS_STATUS_EXT
                                        ;

/*!
LTC PSM Device

@verbatim

Representation of a device and its capabilities.

@endverbatim

REVISION HISTORY
$Revision: 3845 $
$Date: 2015-08-24 14:11:21 -0600 (Mon, 24 Aug 2015) $

Copyright (c) 2014, Linear Technology Corp.(LTC)
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those
of the authors and should not be interpreted as representing official policies,
either expressed or implied, of Linear Technology Corp.

The Linear Technology Linduino is not affiliated with the official Arduino team.
However, the Linduino is only possible because of the Arduino team's commitment
to the open-source community.  Please, visit http://www.arduino.cc and
http://store.arduino.cc , and consider a purchase that will help fund their
ongoing work.
*/

/*! @file
    @ingroup LT_PMBusDevice
    Library Header File for LT_PMBusDeviceLTC3880
*/

#ifndef LT_PMBusDeviceLTC3880_H_
#define LT_PMBusDeviceLTC3880_H_

#include "LT_PMBusDeviceController.h"
#include "LT_PMBusRail.h"
#include "../LTPSM_PartFaultLogs/LT_3880FaultLog.h"

class LT_PMBusDeviceLTC3880 : public LT_PMBusDeviceController
{
  public:

    static uint32_t cap_;

    LT_PMBusDeviceLTC3880(LT_PMBus *pmbus, uint8_t address) : LT_PMBusDeviceController(pmbus, address, 2)
    {
    }

    static LT_PMBusDevice *detect(LT_PMBus *pmbus, uint8_t address)
    {
      uint16_t id;

      LT_PMBusDeviceLTC3880 *device;

      id = pmbus->readMfrSpecialId(address);
      if (  (id & 0xFFF0) == 0x4020)
      {
        if (pmbus->getRailAddress(address) != address)
        {
          device = new LT_PMBusDeviceLTC3880(pmbus, address);

          device->probeSpeed();
          return device;
        }
        else
          return NULL;
      }
      else
        return NULL;
    }

    uint32_t getCapabilities (
    )
    {
      return cap_;
    }

    //! Is/are these capability(s) supported?
    //! @return true if yes
    bool hasCapability(
      uint32_t capability          //!< List of capabilities
    )
    {
      return (cap_ & capability) == capability;
    }


    uint8_t getNumPages(void)
    {
      return 2;
    }

    void enableFaultLog()
    {
      LT_3880FaultLog *faultLog = new LT_3880FaultLog(pmbus_);
      faultLog->enableFaultLog(address_);
      delete faultLog;
    }

    void disableFaultLog()
    {
      LT_3880FaultLog *faultLog = new LT_3880FaultLog(pmbus_);
      faultLog->disableFaultLog(address_);
      delete faultLog;
    }

    bool hasFaultLog()
    {
      LT_3880FaultLog *faultLog = new LT_3880FaultLog(pmbus_);
      if (faultLog->hasFaultLog(address_))
      {
        delete faultLog;
        return true;
      }
      else
      {
        delete faultLog;
        return false;
      }
    }

    char *getFaultLog()
    {
      LT_3880FaultLog *faultLog = new LT_3880FaultLog(pmbus_);
      if (faultLog->hasFaultLog(address_))
      {
        faultLog->read(address_);
//      faultLog->print(&Serial);
        faultLog->dumpBinary(&Serial);
        faultLog->release();
        delete faultLog;
        return NULL;
      }
      else
      {
        delete faultLog;
        return NULL;
      }
    }

    void clearFaultLog()
    {
      LT_3880FaultLog *faultLog = new LT_3880FaultLog(pmbus_);
      if (faultLog->hasFaultLog(address_))
      {
        faultLog->clearFaultLog(address_);
        pmbus_->smbus()->waitForAck(address_, 0x00);
        pmbus_->waitForNotBusy(address_);
        delete faultLog;
      }
      else
      {
        delete faultLog;
      }
    }
};

#endif /* LT_PMBusDeviceLTC3880_H_ */