LTC2631 - Single 12-/10-/8-Bit I2C VOUT DACs with 10ppm/°C Reference

Features

  • Integrated Precision Reference
    2.5V Full-Scale 10ppm/°C (LTC2631-L)
    4.096V Full-Scale 10ppm/°C (LTC2631-H)
  • Maximum INL Error: 1LSB (LTC2631A-12)
  • Bidirectional Reference: Input or 10ppm/°C Output
  • 400kHz I2C™ Interface
  • Nine Selectable Addresses (LTC2631-Z)
  • Low Noise (0.7mVP-P , 0.1Hz to 200kHz)
  • Guaranteed Monotonic Over Temperature
  • 2.7V to 5.5V Supply Range (LTC2631-L)
  • Low Power Operation: 180μA at 3V
  • Power Down to 1.8μA Maximum (C and I Grades)
  • Power-On Reset to Zero or Mid-Scale Options
  • Double-Buffered Data Latches
  • Guaranteed Operation From –40°C to 125°C (H-Grade)
  • 8-Lead TSOT-23 (ThinSOT™) Package
Designed for Automotive and Transportation Applications
AEC-Q100 data available for specific packages


Typical Application

LTC2631 Typical Application
LTC2631 Typical Application

Description

The LTC®2631 is a family of 12-, 10-, and 8-bit voltageoutput DACs with an integrated, high accuracy, low-drift reference in an 8-lead TSOT-23 package. It has a rail-to-rail output buffer that is guaranteed monotonic.

The LTC2631-L has a full-scale output of 2.5V, and operates from a single 2.7V to 5.5V supply. The LTC2631-H has a full-scale output of 4.096V, and operates from a 4.5V to 5.5V supply. A 10ppm/°C reference output is available at the REF pin.

Each DAC can also operate in External Reference mode, in which a voltage supplied to the REF pin sets the fullscale output.

The LTC2631 DACs use a 2-wire, I2C-compatible serial interface. The LTC2631 operates in both the standard mode (clock rate of 100kHz) and the fast mode (clock rate of 400kHz).

The LTC2631 incorporates a power-on reset circuit. Op-tions are available for reset to zero-scale or reset to mid-scale after power-up.

Packaging

CAD Symbols and Footprints: The downloadable Zip file below contains the schematic symbol and PCB footprints.

For complete and up to date package information and drawings, please refer to our packaging page

Part Number Package Code Temp Package
Drawing
RoHS
LTC2631ACTS8-HM12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-HM12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-HM12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-HZ12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-HZ12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-HZ12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-LM12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-LM12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-LM12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-LZ12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-LZ12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631ACTS8-LZ12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631AHTS8-HM12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-HM12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-HM12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-HZ12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-HZ12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-HZ12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-LM12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-LM12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-LM12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-LZ12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-LZ12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AHTS8-LZ12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631AITS8-HM12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-HM12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-HM12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-HZ12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-HZ12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-HZ12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-LM12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-LM12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-LM12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-LZ12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-LZ12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631AITS8-LZ12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631CTS8-HM10#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM10#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM10#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM8#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM8#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HM8#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ10#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ10#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ10#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ8#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ8#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-HZ8#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM10#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM10#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM10#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM8#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM8#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LM8#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ10#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ10#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ10#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ12#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ12#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ12#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ8#PBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ8#TRMPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631CTS8-LZ8#TRPBF SOT-23 TS8 C 05-08-1637 Yes
LTC2631HTS8-HM10#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM10#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM10#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM8#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM8#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HM8#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ10#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ10#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ10#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ8#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ8#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-HZ8#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM10#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM10#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM10#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM8#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM8#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LM8#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ10#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ10#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ10#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ12#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ12#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ12#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ8#PBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ8#TRMPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631HTS8-LZ8#TRPBF SOT-23 TS8 H 05-08-1637 Yes
LTC2631ITS8-HM10#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM10#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM10#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM8#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM8#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HM8#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ10#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ10#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ10#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ8#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ8#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-HZ8#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM10#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM10#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM10#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM8#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM8#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LM8#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ10#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ10#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ10#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ12#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ12#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ12#TRPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ8#PBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ8#TRMPBF SOT-23 TS8 I 05-08-1637 Yes
LTC2631ITS8-LZ8#TRPBF SOT-23 TS8 I 05-08-1637 Yes


LTC2631 Package Drawing
LTC2631 Package Drawing

Order Info

  • Part numbers ending in PBF are lead free. Solder plated terminal finish (SnPb) versions are non-standard and special terms and conditions and pricing applies if available. Please contact LTC marketing for information.
  • Part numbers containing TR or TRM are shipped in tape and reel or 500 unit mini tape and reel, respectively
  • Please refer to our general ordering information or the product datasheet for more details

Package Variations and Pricing

Part Number Package Temp Price
(1-99)
Price
(1k)*
RoHS
LTC2631ACTS8-HM12#PBF SOT-23 C $3.16 Yes
LTC2631ACTS8-HM12#TRMPBF SOT-23 C $3.16 $2.23 Yes
LTC2631ACTS8-HM12#TRPBF SOT-23 C $2.18 Yes
LTC2631ACTS8-HZ12#PBF SOT-23 C $3.16 Yes
LTC2631ACTS8-HZ12#TRMPBF SOT-23 C $3.16 $2.23 Yes
LTC2631ACTS8-HZ12#TRPBF SOT-23 C $2.18 Yes
LTC2631ACTS8-LM12#PBF SOT-23 C $3.16 Yes
LTC2631ACTS8-LM12#TRMPBF SOT-23 C $3.16 $2.23 Yes
LTC2631ACTS8-LM12#TRPBF SOT-23 C $2.18 Yes
LTC2631ACTS8-LZ12#PBF SOT-23 C $3.16 Yes
LTC2631ACTS8-LZ12#TRMPBF SOT-23 C $3.16 $2.23 Yes
LTC2631ACTS8-LZ12#TRPBF SOT-23 C $2.18 Yes
LTC2631AHTS8-HM12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-HM12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-HM12#TRPBF SOT-23 H $2.64 Yes
LTC2631AHTS8-HZ12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-HZ12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-HZ12#TRPBF SOT-23 H $2.64 Yes
LTC2631AHTS8-LM12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-LM12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-LM12#TRPBF SOT-23 H $2.64 Yes
LTC2631AHTS8-LZ12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-LZ12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-LZ12#TRPBF SOT-23 H $2.64 Yes
LTC2631AITS8-HM12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-HM12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-HM12#TRPBF SOT-23 I $2.40 Yes
LTC2631AITS8-HZ12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-HZ12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-HZ12#TRPBF SOT-23 I $2.40 Yes
LTC2631AITS8-LM12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-LM12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-LM12#TRPBF SOT-23 I $2.40 Yes
LTC2631AITS8-LZ12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-LZ12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-LZ12#TRPBF SOT-23 I $2.40 Yes
LTC2631CTS8-HM10#PBF SOT-23 C $2.04 Yes
LTC2631CTS8-HM10#TRMPBF SOT-23 C $2.04 $1.44 Yes
LTC2631CTS8-HM10#TRPBF SOT-23 C $1.39 Yes
LTC2631CTS8-HM12#PBF SOT-23 C $2.31 Yes
LTC2631CTS8-HM12#TRMPBF SOT-23 C $2.31 $1.63 Yes
LTC2631CTS8-HM12#TRPBF SOT-23 C $1.58 Yes
LTC2631CTS8-HM8#PBF SOT-23 C $1.66 Yes
LTC2631CTS8-HM8#TRMPBF SOT-23 C $1.66 $1.18 Yes
LTC2631CTS8-HM8#TRPBF SOT-23 C $1.13 Yes
LTC2631CTS8-HZ10#PBF SOT-23 C $2.04 Yes
LTC2631CTS8-HZ10#TRMPBF SOT-23 C $2.04 $1.44 Yes
LTC2631CTS8-HZ10#TRPBF SOT-23 C $1.39 Yes
LTC2631CTS8-HZ12#PBF SOT-23 C $2.31 Yes
LTC2631CTS8-HZ12#TRMPBF SOT-23 C $2.31 $1.63 Yes
LTC2631CTS8-HZ12#TRPBF SOT-23 C $1.58 Yes
LTC2631CTS8-HZ8#PBF SOT-23 C $1.66 Yes
LTC2631CTS8-HZ8#TRMPBF SOT-23 C $1.66 $1.18 Yes
LTC2631CTS8-HZ8#TRPBF SOT-23 C $1.13 Yes
LTC2631CTS8-LM10#PBF SOT-23 C $2.04 Yes
LTC2631CTS8-LM10#TRMPBF SOT-23 C $2.04 $1.44 Yes
LTC2631CTS8-LM10#TRPBF SOT-23 C $1.39 Yes
LTC2631CTS8-LM12#PBF SOT-23 C $2.31 Yes
LTC2631CTS8-LM12#TRMPBF SOT-23 C $2.31 $1.63 Yes
LTC2631CTS8-LM12#TRPBF SOT-23 C $1.58 Yes
LTC2631CTS8-LM8#PBF SOT-23 C $1.66 Yes
LTC2631CTS8-LM8#TRMPBF SOT-23 C $1.66 $1.18 Yes
LTC2631CTS8-LM8#TRPBF SOT-23 C $1.13 Yes
LTC2631CTS8-LZ10#PBF SOT-23 C $2.04 Yes
LTC2631CTS8-LZ10#TRMPBF SOT-23 C $2.04 $1.44 Yes
LTC2631CTS8-LZ10#TRPBF SOT-23 C $1.39 Yes
LTC2631CTS8-LZ12#PBF SOT-23 C $2.31 Yes
LTC2631CTS8-LZ12#TRMPBF SOT-23 C $2.31 $1.63 Yes
LTC2631CTS8-LZ12#TRPBF SOT-23 C $1.58 Yes
LTC2631CTS8-LZ8#PBF SOT-23 C $1.66 Yes
LTC2631CTS8-LZ8#TRMPBF SOT-23 C $1.66 $1.18 Yes
LTC2631CTS8-LZ8#TRPBF SOT-23 C $1.13 Yes
LTC2631HTS8-HM10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-HM10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-HM10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-HM12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-HM12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-HM12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-HM8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-HM8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-HM8#TRPBF SOT-23 H $1.43 Yes
LTC2631HTS8-HZ10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-HZ10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-HZ10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-HZ12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-HZ12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-HZ12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-HZ8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-HZ8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-HZ8#TRPBF SOT-23 H $1.43 Yes
LTC2631HTS8-LM10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-LM10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-LM10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-LM12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-LM12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-LM12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-LM8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-LM8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-LM8#TRPBF SOT-23 H $1.43 Yes
LTC2631HTS8-LZ10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-LZ10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-LZ10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-LZ12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-LZ12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-LZ12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-LZ8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-LZ8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-LZ8#TRPBF SOT-23 H $1.43 Yes
LTC2631ITS8-HM10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-HM10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-HM10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-HM12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-HM12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-HM12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-HM8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-HM8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-HM8#TRPBF SOT-23 I $1.30 Yes
LTC2631ITS8-HZ10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-HZ10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-HZ10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-HZ12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-HZ12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-HZ12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-HZ8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-HZ8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-HZ8#TRPBF SOT-23 I $1.30 Yes
LTC2631ITS8-LM10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-LM10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-LM10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-LM12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-LM12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-LM12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-LM8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-LM8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-LM8#TRPBF SOT-23 I $1.30 Yes
LTC2631ITS8-LZ10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-LZ10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-LZ10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-LZ12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-LZ12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-LZ12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-LZ8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-LZ8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-LZ8#TRPBF SOT-23 I $1.30 Yes
Buy NowRequest Samples
* The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Linear Technology sales office or authorized distributor.

Demo Boards

Linear Technology offers many demo boards free of charge to qualified customers. Contact your local sales office or distributor to inquire about a demo board. Certain demo boards are also available for sale via credit card on this website. Demo boards are for evaluation purposes only. It remains the customer’s responsibility to verify proper and reliable operation in the actual end application.

Part Number Description Price Documentation
DC1332A-A LTC2631-LM12: 12-Bit I2C DAC (2.5V ref, Reset to Mid-Scale), req DC590B $50.00
DC1332A-C LTC2631-HM12: 12-Bit I2C DAC (4.096V ref, Reset to Mid-Scale), req DC590B $50.00
DC1332A-D LTC2631-HZ12 12-Bit I2C DAC (4.096V ref, Reset to Zero-Scale), req DC590B $50.00
DC1332B-B LTC2631A-LZ12 Demo Board | 12-Bit I2C DAC (2.5V ref, Reset to Zero-Scale), req DC590 $50.00
Buy Now

Companion Boards

Part Number Description Price Documentation
DC590B Isolated USB Serial Controller for Linear Technology QuikEval-Compatible Demo Boards $50.00
Buy Now
Click here to view our complete list of demo boards

Designed for Automotive and Transportation Applications

AEC-Q100 data is available for these specific part numbers. Please contact your local sales representative for more information regarding reliability reports or to inquire about parts that are not included. For more information, view our Automotive and Transportation page

Part Number Package Temp Price
(1-99)
Price
(1k)*
RoHS
LTC2631AHTS8-HM12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-HM12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-HM12#TRPBF SOT-23 H $2.64 Yes
LTC2631AHTS8-HZ12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-HZ12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-HZ12#TRPBF SOT-23 H $2.64 Yes
LTC2631AHTS8-LM12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-LM12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-LM12#TRPBF SOT-23 H $2.64 Yes
LTC2631AHTS8-LZ12#PBF SOT-23 H $3.82 Yes
LTC2631AHTS8-LZ12#TRMPBF SOT-23 H $3.82 $2.69 Yes
LTC2631AHTS8-LZ12#TRPBF SOT-23 H $2.64 Yes
LTC2631AITS8-HM12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-HM12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-HM12#TRPBF SOT-23 I $2.40 Yes
LTC2631AITS8-HZ12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-HZ12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-HZ12#TRPBF SOT-23 I $2.40 Yes
LTC2631AITS8-LM12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-LM12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-LM12#TRPBF SOT-23 I $2.40 Yes
LTC2631AITS8-LZ12#PBF SOT-23 I $3.48 Yes
LTC2631AITS8-LZ12#TRMPBF SOT-23 I $3.48 $2.45 Yes
LTC2631AITS8-LZ12#TRPBF SOT-23 I $2.40 Yes
LTC2631HTS8-HM10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-HM10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-HM10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-HM12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-HM12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-HM12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-HM8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-HM8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-HM8#TRPBF SOT-23 H $1.43 Yes
LTC2631HTS8-HZ10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-HZ10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-HZ10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-HZ12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-HZ12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-HZ12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-HZ8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-HZ8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-HZ8#TRPBF SOT-23 H $1.43 Yes
LTC2631HTS8-LM10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-LM10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-LM10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-LM12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-LM12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-LM12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-LM8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-LM8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-LM8#TRPBF SOT-23 H $1.43 Yes
LTC2631HTS8-LZ10#PBF SOT-23 H $2.45 Yes
LTC2631HTS8-LZ10#TRMPBF SOT-23 H $2.45 $1.73 Yes
LTC2631HTS8-LZ10#TRPBF SOT-23 H $1.68 Yes
LTC2631HTS8-LZ12#PBF SOT-23 H $2.78 Yes
LTC2631HTS8-LZ12#TRMPBF SOT-23 H $2.78 $1.96 Yes
LTC2631HTS8-LZ12#TRPBF SOT-23 H $1.91 Yes
LTC2631HTS8-LZ8#PBF SOT-23 H $2.09 Yes
LTC2631HTS8-LZ8#TRMPBF SOT-23 H $2.09 $1.48 Yes
LTC2631HTS8-LZ8#TRPBF SOT-23 H $1.43 Yes
LTC2631ITS8-HM10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-HM10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-HM10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-HM12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-HM12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-HM12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-HM8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-HM8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-HM8#TRPBF SOT-23 I $1.30 Yes
LTC2631ITS8-HZ10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-HZ10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-HZ10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-HZ12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-HZ12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-HZ12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-HZ8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-HZ8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-HZ8#TRPBF SOT-23 I $1.30 Yes
LTC2631ITS8-LM10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-LM10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-LM10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-LM12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-LM12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-LM12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-LM8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-LM8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-LM8#TRPBF SOT-23 I $1.30 Yes
LTC2631ITS8-LZ10#PBF SOT-23 I $2.23 Yes
LTC2631ITS8-LZ10#TRMPBF SOT-23 I $2.23 $1.58 Yes
LTC2631ITS8-LZ10#TRPBF SOT-23 I $1.53 Yes
LTC2631ITS8-LZ12#PBF SOT-23 I $2.53 Yes
LTC2631ITS8-LZ12#TRMPBF SOT-23 I $2.53 $1.79 Yes
LTC2631ITS8-LZ12#TRPBF SOT-23 I $1.74 Yes
LTC2631ITS8-LZ8#PBF SOT-23 I $1.91 Yes
LTC2631ITS8-LZ8#TRMPBF SOT-23 I $1.91 $1.35 Yes
LTC2631ITS8-LZ8#TRPBF SOT-23 I $1.30 Yes
Buy NowRequest Samples
* The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Linear Technology sales office or authorized distributor.

Applications

  • Mobile Communications
  • Process Control and Industrial Automation
  • Automatic Test Equipment
  • Portable Equipment
  • Automotive
  • Optical Networking

Product Notifications

Please login to your MyLinear account for notifications of datasheet updates, new document releases and LTspice model announcements for your favorite products. If you do not have a MyLinear account you may Sign Up Now.

Forgot your password? Click here.
Need help? Email mylinear@linear.com with questions and comments.

Design Tools

Linduino

Linduino is an Arduino compatible platform for developing and distributing firmware libraries and code for SPI and I²C-compatible integrated circuits. The Linduino One board interfaces to more than 300 QuikEval demonstration cards, supporting a variety of product types including analog-to-digital converters (ADCs)digital-to-analog converters (DACs)power monitors, and more. Firmware libraries for individual devices are written in C and designed to be portable to a wide variety of processors and microcontrollers. Each library has a demonstration program that can be uploaded to the Linduino One platform to allow the circuit and software to be quickly and easily verified.

Click here for more information on Linduino

Code

Linduino is Linear Technology's Arduino compatible system for developing and distributing firmware libraries and example code for Linear Technology’s integrated circuits. The code below can be downloaded or copied and pasted into your project. Please visit the Linduino Home Page for demo board, manual and setup information.

This part is Family Supported: There is example code available for a part in this family. The code may require some changes to work with this specific part, however it still provides many good examples of how certain interactions should take place. The code below may rely on other drivers available in the full library.

Download LTC2640 - DC1333A Linduino .INO File

/*!
Linear Technology DC1333A Demonstration Board.
LTC2640: Single 12-/10-/8-Bit Rail-to-Rail DACs with 10ppm/C Reference
Demonstration Circuit DC1333 features the 12-bit versions of the LTC2640.

Linear Technology DC1074A Demonstration Board.
LTC2630: Single 12-/10-/8-Bit Rail-to-Rail DACs with Integrated Reference in SC70

Linear Technology DC1332 Demonstration Board.
LTC2631: Single 12-/10-/8-Bit I2C VOUT DACs with 10ppm/°C Reference.

@verbatim
NOTES
  Setup:
   Set the terminal baud rate to 115200 and select the newline terminator. The
   program displays calculated voltages which are based on the voltage of the
   reference used, be it internal or external. A precision voltmeter is needed to
   verify the actual measured voltages against the calculated voltage displayed. If
   an external reference is used, a precision voltage source is required to apply
   the external reference voltage. A precision voltmeter is also required to measure
   the external reference voltage. No external power supply is required. All four
   demo board options may be used: DC1333A-A, DC1333A-B, DC1333A-C, or DC1333A-D.


  Explanation of Commands:


   1- Write to DAC input register: Value is stored in the DAC for updating later,
      through a software "Update" command. User will be prompted to enter either a
      code in hex or decimal, or a voltage. If a voltage is entered, a code will be
      calculated based on the active scaling and reference parameters - ideal values
      if no calibration was ever stored. (This is more often used with the
      multichannel DACs in the family, where all DACs can be updated at once in
      software or by asserting the LDAC# pin.)

   2- Write and Update: Similar to item 1, but DAC is updated immediately.

   3- Write to DAC: Sends the DAC code to the Input Register.

   4- Update DAC: Copies the value from the input register into the DAC Register.
      Note that a "write and update" command writes the code to BOTH the input
      register and DAC register, so subsequent "update" commands will simply re-copy
      the same data (no change in output.)

   5- Power Down DAC: Disable DAC output. Power supply current is reduced. DAC code
      present in DAC registers at time of shutdown are preserved.

   6- Set reference mode: Either internal or external. Selecting external mode
      prompts for the external refernce voltage, which is used directly if no
      individual DAC calibration is stored. The selection and entered volgage are
      stored to EEPROM so it is persisent across reset / power cycles.

   7- Calibrate DAC: Use a precision voltmeter to obtain and enter VOUT readings
      taken with different DAC codes. Set reference mode FIRST, as values are stored
      separately for internal and external reference mode. Entries are used to
      calculate the closest code to send to the DAC to achieve an entered voltage.

   8- Enable / Disable Calibration: Switch between stored calibration values and
      defaults. Calibration parameters are stored separately for internal and
      external reference modes. Ideal calibration will be used if the calibration
      parameter valid key is not set.


USER INPUT DATA FORMAT:
 decimal : 1024
 hex     : 0x400
 octal   : 02000  (leading 0 "zero")
 binary  : B10000000000
 float   : 1024.0

@endverbatim

http://www.linear.com/product/LTC2640
http://www.linear.com/product/LTC2630
http://www.linear.com/product/LTC2631

http://www.linear.com/product/LTC2640#demoboards
http://www.linear.com/product/LTC2630#demoboards
http://www.linear.com/product/LTC2631#demoboards

REVISION HISTORY
$Revision: 4782 $
$Date: 2016-03-14 15:36:28 -0700 (Mon, 14 Mar 2016) $

Copyright (c) 2013, Linear Technology Corp.(LTC)
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those
of the authors and should not be interpreted as representing official policies,
either expressed or implied, of Linear Technology Corp.

The Linear Technology Linduino is not affiliated with the official Arduino team.
However, the Linduino is only possible because of the Arduino team's commitment
to the open-source community.  Please, visit http://www.arduino.cc and
http://store.arduino.cc , and consider a purchase that will help fund their
ongoing work.
 */

/*! @file
    @ingroup LTC2640
*/

#include <Arduino.h>
#include <stdint.h>
#include "Linduino.h"
#include "LT_SPI.h"
#include "LT_I2C.h"
#include "UserInterface.h"
#include "QuikEval_EEPROM.h"
#include "LTC2640.h"
#include <SPI.h>
#include <Wire.h>

#define EEPROM_CAL_KEY_INT  0x5678          //!< Calibration associated with internal reference
#define EEPROM_CAL_KEY_EXT  0x9ABC          //!< Calibration associated with external reference

// DAC Reference State
// Could have been zero or 1, this allows you to use the
// variable "reference_mode" as the command argument to a write
#define REF_INTERNAL LTC2640_CMD_INTERNAL_REFERENCE   //!< Stored reference state is Internal
#define REF_EXTERNAL LTC2640_CMD_EXTERNAL_REFERENCE   //!< Stored reference state is External

// EEPROM memory locations
#define STORED_REF_STATE_BASE     EEPROM_CAL_STATUS_ADDRESS     //!< Base address of the stored reference state
#define INT_CAL_VALID_BASE        STORED_REF_STATE_BASE + 2     //!< Base address of the "internal ref calibration valid" flag
#define INT_CAL_PARAMS_BASE       INT_CAL_VALID_BASE + 2        //!< Base address of the internal ref calibration parameters
#define EXT_CAL_VALID_BASE        INT_CAL_PARAMS_BASE + 8       //!< Base address of the "external ref calibration valid" flag
#define EXT_CAL_PARAMS_BASE       EXT_CAL_VALID_BASE + 2        //!< Base address of the external ref calibration parameters
#define EXT_REF_V_BASE            EXT_CAL_PARAMS_BASE + 8       //!< Base address of the stored external reference voltage
#define LSB_PARAM_ADDR_OFFSET     4                             //!< Offset into XXX_CAL_PARAMS_BASE to locate stored LSB parameter

// Function Declaration
int8_t restore_calibration();               // Read the DAC calibration from EEPROM, Return 1 if successful, 0 if not
void store_calibration();                   // Store the DAC calibration to the EEPROM
void print_title();                         // Print the title block
void print_prompt();                        // Prompt the user for an input command
int16_t prompt_voltage_or_code();
uint16_t get_voltage(float LTC2640_lsb, int32_t LTC2640_offset);
uint16_t get_code();
void calibrate_dac();                       // Calibrate the selected DAC using a voltmeter. The routine does a linear curve fit given two data points.

void menu_1_write_to_input_register();
void menu_2_write_and_update_dac();
void menu_3_update_power_up_dac();
void menu_4_power_down_dac();
void menu_5_set_reference_mode();           // Int, ext, if ext, prompt for voltage
void menu_6_calibrate_dacs();
void menu_7_enable_calibration();

// Global variables
static uint8_t demo_board_connected;        //!< Set to 1 if the board is connected
static uint8_t shift_count = 4;             //!< The data align shift count. For 12-bits, shift_count = 4
static uint8_t reference_mode;              //!< Tells whether to set internal or external reference

// Global calibration variables
static float reference_voltage;         //!< Reference voltage, either internal or external
static float LTC2640_lsb = 1e-3;            //!< DAC lsb. Default to 12-bits
static int16_t LTC2640_offset = 0;          //!< DAC offset

//! Used to keep track to print voltage or print code
enum
{
  PROMPT_VOLTAGE = 0, /**< 0 */
  PROMPT_CODE = 1     /**< 1  */
};

//! Initialize Linduino
void setup()
// Setup the program
{
  char demo_name[] = "DC1333";  // Demo Board Name stored in QuikEval EEPROM

  quikeval_SPI_init();          // Configure the spi port for 4Mhz SCK
  quikeval_SPI_connect();       // Connect SPI to main data port
  quikeval_I2C_init();          // Configure the EEPROM I2C port for 100khz
  Serial.begin(115200);         // Initialize the serial port to the PC
  print_title();
  demo_board_connected = discover_demo_board(demo_name);
  if (demo_board_connected)
  {
    // The DC1333A does not have the option indicated in the demo board name
    // Uses product name for the option
    if (strlen(strstr(demo_board.product_name, "-LM")) > 1)
      demo_board.option = 'A';
    if (strlen(strstr(demo_board.product_name, "-LZ")) > 1)
      demo_board.option = 'B';
    if (strlen(strstr(demo_board.product_name, "-HM")) > 1)
      demo_board.option = 'C';
    if (strlen(strstr(demo_board.product_name, "-HZ")) > 1)
      demo_board.option = 'D';
    Serial.print("Demo Board Option: ");
    Serial.println(demo_board.option);
    restore_calibration();
    print_prompt();
  }
}

//! Repeats Linduino loop
void loop()
{
  int16_t user_command;
  // The main control loop
  if (demo_board_connected)             // Do nothing if the demo board is not connected
  {
    if (Serial.available())             // Check for user input
    {
      user_command = read_int();        // Read the user command
      Serial.println(user_command);
      Serial.flush();
      switch (user_command)
      {
        case 1:
          menu_1_write_to_input_register();
          break;
        case 2:
          menu_2_write_and_update_dac();
          break;
        case 3:
          menu_3_update_power_up_dac();
          break;
        case 4:
          menu_4_power_down_dac();
          break;
        case 5:
          menu_5_set_reference_mode(); // Int, ext, if ext, prompt for voltage
          restore_calibration();
          break;
        case 6:
          menu_6_calibrate_dacs();
          restore_calibration();
          break;
        case 7:
          menu_7_enable_calibration();
          restore_calibration();
          break;
        default:
          Serial.println("Incorrect Option");
          break;
      }
      Serial.println("\n*****************************************************************");
      print_prompt();
    }
  }
}

// Function Definitions

//! Write data to input register, but do not update DAC output
void menu_1_write_to_input_register()
{
  uint16_t dac_code;

  if (prompt_voltage_or_code() == PROMPT_VOLTAGE)
    dac_code = get_voltage(LTC2640_lsb, LTC2640_offset);
  else
    dac_code = get_code();

  LTC2640_write(LTC2640_CS, LTC2640_CMD_WRITE, dac_code << shift_count);
}

//!Write data to DAC register (which updates output immediately)
void menu_2_write_and_update_dac()
{
  uint16_t dac_code;

  if (prompt_voltage_or_code() == PROMPT_VOLTAGE)
    dac_code = get_voltage(LTC2640_lsb, LTC2640_offset);
  else
    dac_code = get_code();
  LTC2640_write(LTC2640_CS, LTC2640_CMD_WRITE_UPDATE, dac_code << shift_count);
}

//! Update DAC with data that is stored in input register, power up if sleeping
void menu_3_update_power_up_dac()
{
  // Update DAC
  LTC2640_write(LTC2640_CS, LTC2640_CMD_UPDATE, 0x0000);
}

//! Power down DAC
void menu_4_power_down_dac()
{
  // Power down DAC
  LTC2640_write(LTC2640_CS, LTC2640_CMD_POWER_DOWN, 0x0000);
}

//! Set reference mode and store to EEPROM
void menu_5_set_reference_mode() // Int, ext, if ext, prompt for voltage
{
  int16_t user_input;
  Serial.println("Select reference mode - 0 for Internal, 1 for External");
  user_input = read_int();
  if (user_input == 1)
  {
    reference_mode = REF_EXTERNAL;
    Serial.println("External reference mode; enter external reference voltage");
    reference_voltage = read_float();
    Serial.print(reference_voltage, 5);
    Serial.println("V");
    eeprom_write_float(EEPROM_I2C_ADDRESS, reference_voltage, EXT_REF_V_BASE);
  }
  else
  {
    reference_mode = REF_INTERNAL;
    Serial.println("Internal reference mode selected");
  }
  Serial.println("Writing reference mode to EEPROM\n\n");
  eeprom_write_byte(EEPROM_I2C_ADDRESS, reference_mode, STORED_REF_STATE_BASE);
}

//! Calibrate all DACs by measuring two known outputs
void menu_6_calibrate_dacs()
{
  // Calibrate the DACs using a multimeter
  calibrate_dac();     // Run calibration routine
  store_calibration();
}

//! Enable / Disable calibration. Use with caution - behavior is undefined if you enable calibration and an actual
//! calibration cycle has not been performed.
void menu_7_enable_calibration()
{
  int16_t user_input;
  Serial.println(F("\n\nSelect option -  0: Enable Internal, 1: Disable Internal, 2: Enable External, 3: Disable External"));
  user_input = read_int();
  switch (user_input)
  {
    case 0:
      Serial.println(F("Enabling Internal Cal Params"));
      eeprom_write_int16(EEPROM_I2C_ADDRESS, EEPROM_CAL_KEY, INT_CAL_VALID_BASE);
      break;
    case 1:
      Serial.println(F("Disabling Internal Cal Params"));
      eeprom_write_int16(EEPROM_I2C_ADDRESS, 0x0000, INT_CAL_VALID_BASE);
      break;
    case 2:
      Serial.println(F("Enabling External Cal Params"));
      eeprom_write_int16(EEPROM_I2C_ADDRESS, EEPROM_CAL_KEY, EXT_CAL_VALID_BASE);
      break;
    case 3:
      Serial.println(F("Disabling External Cal Params"));
      eeprom_write_int16(EEPROM_I2C_ADDRESS, 0x0000, EXT_CAL_VALID_BASE);
      break;
  }
}

//! Read stored calibration parameters from nonvolatile EEPROM on demo board
//! @return Return 1 if successful, 0 if not
int8_t restore_calibration()
// Read the DAC calibration from EEPROM
// Return 1 if successful, 0 if not
{
  int16_t intvalid, extvalid;
  uint8_t i, eeaddr;
  float dac_count;                                  // The number of codes, 4096 for 12 bits, 65536 for 16 bits

  Serial.println(F("\n\nReading Calibration parameters from EEPROM..."));
  float full_scale; // To avoid confusion - in internal ref mode, FS=Vref, in ext mode, FS=2*Vref
  // Read the cal keys from the EEPROM.
  eeprom_read_int16(EEPROM_I2C_ADDRESS, &intvalid, INT_CAL_VALID_BASE);
  eeprom_read_int16(EEPROM_I2C_ADDRESS, &extvalid, EXT_CAL_VALID_BASE);
  // Read the stored reference state
  eeprom_read_byte(EEPROM_I2C_ADDRESS, (char *) &reference_mode, STORED_REF_STATE_BASE);
  // Read external ref V unconditionally, overwrite with defaults if no cal found
  eeprom_read_float(EEPROM_I2C_ADDRESS, &reference_voltage, EXT_REF_V_BASE);

  if (reference_mode == REF_EXTERNAL)
  {
    Serial.print(F("Restored external ref. Voltage:"));
    Serial.println(reference_voltage, 5);
  }
  else  // EITHER reference is set to internal, OR not programmed in which case default to internal
  {
    reference_mode = REF_INTERNAL; // Redundant if already set
    Serial.println("Internal reference mode set");
  }

  // Write the reference mode to the DAC right away
  LTC2640_write(LTC2640_CS, reference_mode, 0x0000);

  // Set up default values, shift count, DAC count
  // Calibration parameters MAY be changed next, if match
  // between reference mode and stored calibration
  full_scale = reference_voltage; // If external ref mode, this applies.
  switch (demo_board.option)
  {
    case 'A':
      // LTC2640-LM, 12-bits, 2.5V full scale
      shift_count = 4;
      if (reference_mode == REF_INTERNAL) full_scale = 2.5;
      dac_count = 4096;
      break;
    case 'B':
      // LTC2640-LZ, 12-bits, 4.096V full scale
      shift_count = 4;
      if (reference_mode == REF_INTERNAL) full_scale = 2.5;
      dac_count = 4096;
      break;
    case 'C':
      // LTC2640-HM, 12-bits, 2.5V full scale
      shift_count = 4;
      if (reference_mode == REF_INTERNAL) full_scale = 4.096;
      dac_count = 4096;
      break;
    case 'D':
      // LTC2640-HZ, 12-bits, 4.096V full scale
      shift_count = 4;
      if (reference_mode == REF_INTERNAL) full_scale = 4.096;
      dac_count = 4096;
      break;
  }

  LTC2640_offset = 0;
  LTC2640_lsb = full_scale / dac_count;

  // Restore calibration IF reference mode matches stored calibraiton
  eeaddr = 0;   // Assume no calibration present or mismatch between cal and reference mode

  if ((intvalid == EEPROM_CAL_KEY) && (reference_mode == REF_INTERNAL))
  {
    eeaddr = INT_CAL_PARAMS_BASE;
    Serial.println(F("Found internal calibration, restoring...)"));
  }
  else if ((extvalid == EEPROM_CAL_KEY) && (reference_mode == REF_EXTERNAL))
  {
    eeaddr = EXT_CAL_PARAMS_BASE;
    Serial.println(F("Found external calibration, restoring...)"));
  }
  else Serial.println(F("Calibration not found for this\nreference mode, using ideal calibration"));

  if (eeaddr != 0) // If cal key was enabled and reference mode is correct, read offset and lsb
  {
    eeprom_read_int16(EEPROM_I2C_ADDRESS, &LTC2640_offset, eeaddr);
    eeprom_read_float(EEPROM_I2C_ADDRESS, &LTC2640_lsb, eeaddr + LSB_PARAM_ADDR_OFFSET);
    Serial.println("Calibration Restored");
  }

  Serial.print("offset: ");
  Serial.print(LTC2640_offset);
  Serial.print(" , lsb: ");
  Serial.print(LTC2640_lsb * 1000, 4);
  Serial.println(" mv");

  if (eeaddr != 0) return (1);
  return (0);
}

//! Store measured calibration parameters to nonvolatile EEPROM on demo board
void store_calibration()
// Store the DAC calibration to the EEPROM
{
  uint8_t eeaddr;
  if (reference_mode == REF_INTERNAL)
  {
    eeprom_write_int16(EEPROM_I2C_ADDRESS, EEPROM_CAL_KEY, INT_CAL_VALID_BASE);
    eeaddr = INT_CAL_PARAMS_BASE;
  }
  else
  {
    eeprom_write_int16(EEPROM_I2C_ADDRESS, EEPROM_CAL_KEY, EXT_CAL_VALID_BASE);
    eeaddr = EXT_CAL_PARAMS_BASE;
  }
  eeprom_write_int16(EEPROM_I2C_ADDRESS, LTC2640_offset, eeaddr);        // Offset
  eeprom_write_float(EEPROM_I2C_ADDRESS, LTC2640_lsb, eeaddr + LSB_PARAM_ADDR_OFFSET);      // lsb
  Serial.println(F("Calibration Stored to EEPROM"));
}

//! Prompt user to enter a voltage or digital code to send to DAC
//! @return Returns the prompt indicator
int16_t prompt_voltage_or_code()
{
  int16_t user_input;
  Serial.print(F("Type 1 to enter voltage, 2 to enter code:"));
  Serial.flush();
  user_input = read_int();
  Serial.println(user_input);

  if (user_input != 2)
    return(PROMPT_VOLTAGE);
  else
    return(PROMPT_CODE);
}

//! Get voltage from user input, calculate DAC code based on lsb, offset
//! @return Returns the DAC code
uint16_t get_voltage(float LTC2640_lsb, int16_t LTC2640_offset)
{
  float dac_voltage;

  Serial.print(F("Enter Desired DAC output voltage: "));
  dac_voltage = read_float();
  Serial.print(dac_voltage);
  Serial.println(" V");
  Serial.flush();
  return(LTC2640_voltage_to_code(dac_voltage, LTC2640_lsb, LTC2640_offset));
}

//! Get code to send to DAC directly, in decimal, hex, or binary
//! @return Returns users input dac code
uint16_t get_code()
{
  uint16_t returncode;
  Serial.println("Enter Desired DAC Code");
  Serial.print("(Format 32768, 0x8000, 0100000, or B1000000000000000): ");
  returncode = (uint16_t) read_int();
  Serial.print("0x");
  Serial.println(returncode, HEX);
  Serial.flush();
  return(returncode);
}

//! Prints the title block when program first starts.
void print_title()
{
  Serial.println("");
  Serial.println(F("*****************************************************************"));
  Serial.println(F("* DC1333 Demonstration Program                                  *"));
  Serial.println(F("*                                                               *"));
  Serial.println(F("* This program demonstrates how to send data to the LTC2640     *"));
  Serial.println(F("* Single 12-bit DAC found on the DC1333 demo board.             *"));
  Serial.println(F("*                                                               *"));
  Serial.println(F("* Set the baud rate to 115200 and select the newline terminator.*"));
  Serial.println(F("*                                                               *"));
  Serial.println(F("*****************************************************************"));
}

//! Prints main menu.
void print_prompt()
{
  Serial.println(F("\nCommand Summary:"));
  Serial.println(F("  1-Write to input register (no update)"));
  Serial.println(F("  2-Write and update DAC"));
  Serial.println(F("  3-Update / power up DAC"));
  Serial.println(F("  4-Power down DAC"));
  Serial.println(F("  5-Set reference mode"));
  Serial.println(F("  6-Calibrate DAC"));
  Serial.println(F("  7-Enable / Disable calibration"));

  Serial.println("\nPresent Values:");
  Serial.print("  DAC Reference: ");
  if (reference_mode == REF_INTERNAL)
    Serial.println("Internal");
  else
  {
    Serial.print(F("External "));
    Serial.print(reference_voltage, 5);
    Serial.println(F("V reference, please verify"));
    Serial.print(F("Enter a command:"));
  }
  Serial.flush();
}

//! Calibrate the selected DAC using a voltmeter. The routine
//! does a linear curve fit given two data points.
void calibrate_dac()
{
  uint16_t code1 = 0x0020;                            //! Calibration code 1
  uint16_t code2 = 0x0FFF;                            //! Calibration code 2
  float voltage1;                                     //! Calibration voltage 1
  float voltage2;                                     //! Calibration voltage 2
  Serial.println();
  Serial.print("Calibrating DAC ");

  // Left align 12-bit code1 to 16 bits & write to DAC
  LTC2640_write(LTC2640_CS,LTC2640_CMD_WRITE_UPDATE, code1 << shift_count);
  Serial.print("DAC code set to 0x");
  Serial.println(code1, HEX);
  Serial.print("Enter measured DAC voltage:");
  voltage1 = read_float();
  Serial.print(voltage1, 6);
  Serial.println(" V");
  // Left align 12-bit code2 to 16 bits & write to DAC
  LTC2640_write(LTC2640_CS, LTC2640_CMD_WRITE_UPDATE, code2 << shift_count);
  Serial.print("DAC code set to 0x");
  Serial.println(code2, HEX);
  Serial.print("Enter measured DAC voltage:");
  voltage2 = read_float();
  Serial.print(voltage2, 6);
  Serial.println(" V");
  LTC2640_calibrate(code1, code2, voltage1, voltage2, &LTC2640_lsb, &LTC2640_offset);
}

Download LTC2640 Linduino .CPP File

/*!
LTC2640: Single 12-/10-/8-Bit Rail-to-Rail DACs with 10ppm/C Reference.
LTC2630: Single 12-/10-/8-Bit Rail-to-Rail DACs with Integrated Reference in SC70.
LTC2631: Single 12-/10-/8-Bit I2C VOUT DACs with 10ppm/°C Reference.

@verbatim

The LTC2640 is a family of 12-, 10-, and 8-bit voltage-output DACs with an
integrated, high-accuracy, low-drift reference in an 8-lead TSOT-23 package. It
has a rail-to-rail output buffer that is guaranteed monotonic.

The LTC2640-L has a full-scale output of 2.5V, and operates from a single 2.7V
to 5.5V supply. The LTC2640-H has a full-scale output of 4.096V, and operates
from a 4.5V to 5.5V supply. A 10 ppm/C reference output is available at the REF
pin.

Each DAC can also operate in External Reference mode, in which a voltage
supplied to the REF pin sets the full- scale output. The LTC2640 DACs use a
SPI/MICROWIRE compatible 3-wire serial interface which operates at clock rates
up to 50 MHz.

The LTC2640 incorporates a power-on reset circuit. Options are available for
Reset to Zero Scale or Reset to Midscale after power-up.

@endverbatim

http://www.linear.com/product/LTC2640
http://www.linear.com/product/LTC2630
http://www.linear.com/product/LTC2631

http://www.linear.com/product/LTC2640#demoboards
http://www.linear.com/product/LTC2630#demoboards
http://www.linear.com/product/LTC2631#demoboards

REVISION HISTORY
$Revision: 4782 $
$Date: 2016-03-14 15:36:28 -0700 (Mon, 14 Mar 2016) $

Copyright (c) 2013, Linear Technology Corp.(LTC)
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those
of the authors and should not be interpreted as representing official policies,
either expressed or implied, of Linear Technology Corp.

The Linear Technology Linduino is not affiliated with the official Arduino team.
However, the Linduino is only possible because of the Arduino team's commitment
to the open-source community.  Please, visit http://www.arduino.cc and
http://store.arduino.cc , and consider a purchase that will help fund their
ongoing work.
 */

//! @defgroup LTC2640 LTC2640: Single 12-/10-/8-Bit Rail-to-Rail DACs with 10ppm/C Reference

/*! @file
    @ingroup LTC2640
    Library for LTC2640: Single 12-/10-/8-Bit Rail-to-Rail DACs with 10ppm/C Reference
*/

#include <stdint.h>
#include <Arduino.h>
#include "Linduino.h"
#include <math.h>
#include "LT_SPI.h"
#include "LTC2640.h"
#include <SPI.h>

// Write the dac_command and 16-bit dac_code to the LTC2640. The dac_code
// must be left aligned before calling this function.
void LTC2640_write(uint8_t cs, uint8_t dac_command, uint16_t dac_code)
{
  LT_union_int16_2bytes data;
  data.LT_uint16 = dac_code;

  uint8_t data_array[3], rx_array[3];
  data_array[2] = dac_command;
  data_array[1] = data.LT_byte[1];
  data_array[0] = data.LT_byte[0];

  spi_transfer_block(cs, data_array, rx_array, 3);
}

// Calculate the LTC2640 DAC code given the desired output voltage
uint16_t LTC2640_voltage_to_code(float dac_voltage, float LTC2640_lsb, int16_t LTC2640_offset)
{
  int32_t dac_code;
  dac_code = dac_voltage / LTC2640_lsb;                                                               //! 1) Calculate DAC code as float from  lsb, offset and DAC voltage
  dac_code = (dac_code > (floor(dac_code) + 0.5)) ? ceil(dac_code) : floor(dac_code);                 //! 2) Round
  dac_code = dac_code - LTC2640_offset;                                                               //! 3) Subtract offset
  if (dac_code < 0)                                                                                   //! 4) If DAC code < 0, Then DAC code = 0
    dac_code = 0;
  if (dac_code > 4095)
    dac_code = 4095;
  return ((uint16_t)dac_code);                                                                        //! 5) Cast DAC code as uint16_t
}

// Calculate the LTC2640 DAC output voltage given the DAC code
float LTC2640_code_to_voltage(uint16_t dac_code, float LTC2640_lsb, int16_t LTC2640_offset)
{
  float dac_voltage;
  dac_voltage = ((float)(dac_code + LTC2640_offset)* LTC2640_lsb);                                    //! 1) Calculate voltage from DAC code, lsb, and offset
  return (dac_voltage);
}

// Calculate the LTC2640 offset and LSB voltages given two measured voltages and their corresponding codes
void LTC2640_calibrate(uint16_t dac_code1, uint16_t dac_code2, float voltage1, float voltage2, float *LTC2640_lsb, int16_t *LTC2640_offset)
{
  int16_t temp_offset;
  *LTC2640_lsb = (voltage2 - voltage1) / ((float) (dac_code2 - dac_code1));                           //! 1) Calculate LSB
  temp_offset = voltage1/(*LTC2640_lsb) - dac_code1;                                                  //! 2) Calculate the offset
  temp_offset = (temp_offset > (floor(temp_offset) + 0.5)) ? ceil(temp_offset) : floor(temp_offset);  //! 3) Round offset
  *LTC2640_offset = (int16_t)temp_offset;                                                             //! 4) Cast as int16_t
}

Download LTC2640 Linduino Header File

/*!
LTC2640: Single 12-/10-/8-Bit Rail-to-Rail DACs with 10ppm/C Reference.
LTC2630: Single 12-/10-/8-Bit Rail-to-Rail DACs with Integrated Reference in SC70.
LTC2631: Single 12-/10-/8-Bit I2C VOUT DACs with 10ppm/°C Reference.

@verbatim

The LTC2640 is a family of 12-, 10-, and 8-bit voltage-output DACs with an
integrated, high-accuracy, low-drift reference in an 8-lead TSOT-23 package. It
has a rail-to-rail output buffer that is guaranteed monotonic.

The LTC2640-L has a full-scale output of 2.5V, and operates from a single 2.7V
to 5.5V supply. The LTC2640-H has a full-scale output of 4.096V, and operates
from a 4.5V to 5.5V supply. A 10 ppm/C reference output is available at the REF
pin.

Each DAC can also operate in External Reference mode, in which a voltage
supplied to the REF pin sets the full- scale output. The LTC2640 DACs use a
SPI/MICROWIRE compatible 3-wire serial interface which operates at clock rates
up to 50 MHz.

The LTC2640 incorporates a power-on reset circuit. Options are available for
Reset to Zero Scale or Reset to Midscale after power-up.

SPI DATA FORMAT (MSB First):

            Byte #1                            Byte #2          Byte #3
(LTC2640-12)
Data In  :  C3 C2 C1 C0 X X X X    D11 D10 D9 D8 D7 D6 D5 D4    D3 D2 D1 D0 X X X X
(LTC2640-10)
Data In  :  C3 C2 C1 C0 X X X X    D9  D8  D7 D6 D5 D4 D3 D2    D1 D0 X  X  X X X X
(LTC2640-8)
Data In  :  C3 C2 C1 C0 X X X X    D7  D6  D5 D4 D3 D2 D1 D0    X  X  X  X  X X X X

Cx   : DAC Command Code
Dx   : Data Bits
X    : Don't care

Example Code:

Set DAC to 1V for 12-bit DAC.


    shift_count = 4; // Set shift count for 12-bit DAC

    dac_voltage = 1.0;  // Set dac voltage variable to 1V;
    dac_code = LTC2640_voltage_to_code(dac_voltage, LTC2640_lsb, LTC2640_offset); // Calculates DAC code from desired voltage

    LTC2640_write(LTC2640_CS, LTC2640_CMD_WRITE_UPDATE, dac_code << shift_count);

@endverbatim

http://www.linear.com/product/LTC2640
http://www.linear.com/product/LTC2630
http://www.linear.com/product/LTC2631

http://www.linear.com/product/LTC2640#demoboards
http://www.linear.com/product/LTC2630#demoboards
http://www.linear.com/product/LTC2631#demoboards

REVISION HISTORY
$Revision: 4782 $
$Date: 2016-03-14 15:36:28 -0700 (Mon, 14 Mar 2016) $

Copyright (c) 2013, Linear Technology Corp.(LTC)
All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this
   list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
   this list of conditions and the following disclaimer in the documentation
   and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The views and conclusions contained in the software and documentation are those
of the authors and should not be interpreted as representing official policies,
either expressed or implied, of Linear Technology Corp.

The Linear Technology Linduino is not affiliated with the official Arduino team.
However, the Linduino is only possible because of the Arduino team's commitment
to the open-source community.  Please, visit http://www.arduino.cc and
http://store.arduino.cc , and consider a purchase that will help fund their
ongoing work.
 */

/*! @file
    @ingroup LTC2640
    Header for LTC2640 Single 12-/10-/8-Bit Rail-to-Rail DACs with 10ppm/C Reference
*/

#ifndef LTC2640_H
#define LTC2640_H

#include <SPI.h>

//! Define the SPI CS pin
#ifndef LTC2640_CS
#define LTC2640_CS QUIKEVAL_CS //! SPI Chip Select Pin
#endif

//! @name LTC2640 Command Codes (C3-C0)
//! @{
#define  LTC2640_CMD_WRITE               0x00  // Write to input register
#define  LTC2640_CMD_UPDATE              0x10  // Update (power up) DAC register
#define  LTC2640_CMD_WRITE_UPDATE        0x30  // Write to and update (power up) the DAC register
#define  LTC2640_CMD_POWER_DOWN          0x40  // Power down
#define  LTC2640_CMD_INTERNAL_REFERENCE  0x60  // Select internal reference (default at power up)
#define  LTC2640_CMD_EXTERNAL_REFERENCE  0x70  // Select the supply as the reference
//! @}

//! Write the dac_command and 16-bit dac_code to the LTC2640. The dac_code
//! must be left aligned before calling this function.
//! @return Void
void LTC2640_write(uint8_t cs,          //!< Chip Select Pin
                   uint8_t dac_command, //!< Command code nibble
                   uint16_t dac_code    //!< 12-bit DAC code, left justified
                  );

//! Calculate the LTC2640 DAC code given the desired output voltage
//! @return Code to send to DAC
uint16_t LTC2640_voltage_to_code(float dac_voltage,       //!< Voltage to send to DAC
                                 float LTC2640_lsb,       //!< LSB value (volts)
                                 int16_t LTC2640_offset   //!< Offset (volts)
                                );

//! Calculate the LTC2640 DAC output voltage given the DAC code, offset, and LSB value
//! @return Calculated voltage
float LTC2640_code_to_voltage(uint16_t dac_code,          //!< DAC code
                              float LTC2640_lsb,          //!< LSB value (volts)
                              int16_t LTC2640_offset      //!< Offset (volts)
                             );

//! Calculate the LTC2640 offset and LSB voltages given two measured voltages and their corresponding codes
//! @return Void
void LTC2640_calibrate(uint16_t dac_code1,                //!< First DAC code
                       uint16_t dac_code2,                //!< Second DAC code
                       float voltage1,                    //!< First voltage
                       float voltage2,                    //!< Second voltage
                       float *LTC2640_lsb,                //!< Returns resulting LSB (volts)
                       int16_t *LTC2640_offset            //!< Returns resulting Offset (volts)
                      );

#endif  // LTC2640_H

Technical Support