LT3980 - 58V, 2A, 2.4MHz Step-Down Switching Regulator with 85μA Quiescent Current

Features

  • Wide Input Range: Operation from 3.6V to 58V
  • Overvoltage Lockout Protects Circuits Through 80V Transients
  • 2A Maximum Output Current
  • Low Ripple (<15mVP-P) Burst Mode® Operation: IQ = 85μA at 12VIN to 3.3VOUT
  • Adjustable Switching Frequency: 100kHz to 2.4MHz
  • Low Shutdown Current: IQ < 1μA
  • Catch Diode Current Sense Protects Circuit Through Short-Circuit and Input Overvoltage
  • Synchronizable Between 250kHz to 2MHz
  • Power Good Flag
  • Saturating Switch Design: 200mΩ On-Resistance
  • Thermal Protection
  • Soft-Start Capability
  • Small 16-Pin Thermally Enhanced MSOP and 3mm × 4mm DFN Packages
Designed for Automotive and Transportation Applications
AEC-Q100 generic family data available for specific packages


Typical Application

LT3980 Typical Application
LT3980 Typical Application

Description

The LT®3980 is an adjustable frequency (100kHz to 2.4MHz) monolithic buck switching regulator that accepts input voltages up to 58V (80V transient). A high efficiency 200mΩ switch is included on the die along with a boost Schottky diode and the necessary oscillator, control, and logic circuitry. Current mode topology is used for fast transient response and good loop stability. Catch diode current sense (DA pin) protects the circuit during input voltage transients even when a high switching frequency is used. Low ripple Burst Mode operation maintains high efficiency at low output currents while keeping output ripple below 15mV in a typical application. In addition, the LT3980 can further enhance low output current efficiency by drawing bias current from the output when VOUT is above 3V. Shutdown reduces input supply current to less than 1μA while a resistor and capacitor on the RUN/SS pin provide a controlled output voltage ramp (soft-start). A power good flag signals when VOUT reaches 91% of the programmed output voltage. The LT3980 is available in 16-pin MSOP and 3mm × 4mm DFN packages with exposed pads for low thermal resistance.

Packaging

CAD Symbols and Footprints: The downloadable Zip file below contains the schematic symbol and PCB footprints.

For complete and up to date package information and drawings, please refer to our packaging page

Part Number Package Code Temp Package
Drawing
RoHS
LT3980EDE#PBF 4x3 DFN-14 DE E 05-08-1708 Yes
LT3980EDE#TRPBF 4x3 DFN-14 DE E 05-08-1708 Yes
LT3980EMSE#PBF MS-16E MSE E 05-08-1667 Yes
LT3980EMSE#TRPBF MS-16E MSE E 05-08-1667 Yes
LT3980HMSE#PBF MS-16E MSE H 05-08-1667 Yes
LT3980HMSE#TRPBF MS-16E MSE H 05-08-1667 Yes
LT3980IDE#PBF 4x3 DFN-14 DE I 05-08-1708 Yes
LT3980IDE#TRPBF 4x3 DFN-14 DE I 05-08-1708 Yes
LT3980IMSE#PBF MS-16E MSE I 05-08-1667 Yes
LT3980IMSE#TRPBF MS-16E MSE I 05-08-1667 Yes


LT3980 Package Drawing
LT3980 Package Drawing

Order Info

  • Part numbers ending in PBF are lead free. Solder plated terminal finish (SnPb) versions are non-standard and special terms and conditions and pricing applies if available. Please contact LTC marketing for information.
  • Part numbers containing TR or TRM are shipped in tape and reel or 500 unit mini tape and reel, respectively
  • Please refer to our general ordering information or the product datasheet for more details

Package Variations and Pricing

Part Number Package Temp Price
(1-99)
Price
(1k)*
RoHS
LT3980EDE#PBF 4x3 DFN-14 E $5.07 $3.55 Yes
LT3980EDE#TRPBF 4x3 DFN-14 E $3.61 Yes
LT3980EMSE#PBF MS-16E E $5.07 $3.55 Yes
LT3980EMSE#TRPBF MS-16E E $3.61 Yes
LT3980HMSE#PBF MS-16E H $6.33 $4.43 Yes
LT3980HMSE#TRPBF MS-16E H $4.49 Yes
LT3980IDE#PBF 4x3 DFN-14 I $5.97 $4.18 Yes
LT3980IDE#TRPBF 4x3 DFN-14 I $4.24 Yes
LT3980IMSE#PBF MS-16E I $5.97 $4.18 Yes
LT3980IMSE#TRPBF MS-16E I $4.24 Yes
Buy NowRequest Samples
* The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Linear Technology sales office or authorized distributor.

Demo Boards

Linear Technology offers many demo boards free of charge to qualified customers. Contact your local sales office or distributor to inquire about a demo board. Certain demo boards are also available for sale via credit card on this website. Demo boards are for evaluation purposes only. It remains the customer’s responsibility to verify proper and reliable operation in the actual end application.

Part Number Description Price Documentation
DC1476A LT3980EMSE Demo Board | 6.8V ≤ VIN ≤ 58V (80V Transients), VOUT = 5V @ 2A $150.00
Buy Now
Click here to view our complete list of demo boards

Designed for Automotive and Transportation Applications

Please contact your local sales representative for more information regarding reliability reports and AEC-Q100 data or to inquire about parts that are not included. For more information, view our Automotive and Transportation page

Part Number Package Temp Price
(1-99)
Price
(1k)*
RoHS
LT3980HMSE#PBF MS-16E H $6.33 $4.43 Yes
LT3980HMSE#TRPBF MS-16E H $4.49 Yes
LT3980IDE#PBF 4x3 DFN-14 I $5.97 $4.18 Yes
LT3980IDE#TRPBF 4x3 DFN-14 I $4.24 Yes
LT3980IMSE#PBF MS-16E I $5.97 $4.18 Yes
LT3980IMSE#TRPBF MS-16E I $4.24 Yes
Buy NowRequest Samples
* The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Linear Technology sales office or authorized distributor.

Applications

  • Automotive Battery Regulation
  • Distributed Supply Regulation
  • Industrial Supplies
  • Wall Transformer Regulation

Product Notifications

Please login to your MyLinear account for notifications of datasheet updates, new document releases and LTspice model announcements for your favorite products. If you do not have a MyLinear account you may Sign Up Now.

Forgot your password? Click here.
Need help? Email mylinear@linear.com with questions and comments.

Design Tools

LTspice

LTspice® software is a powerful, fast and free simulation tool, schematic capture and waveform viewer with enhancements and models for improving the simulation of switching regulators. Click here to download LTspice

To launch a ready to run LTspice demonstration circuit for this part:

  • Step 1: If you have not installed LTspice on this computer, download and install LTspice
  • Step 2: Once LTspice is installed, click on the link(s) below to launch the simulation
  • Step 3: If LTspice does not automatically open after clicking the link above, you can instead run the simulation by right clicking on the link and selecting "Save Target As." After saving the file to your computer, start LTspice and open the demonstration circuit by selecting 'Open' from the 'File' menu

To explore other ready to run LTspice demonstration circuits, please visit our Demo Circuits Collection.

Models for the following parts are available in LTspice:
LT3980

LTpowerCAD

The LTpowerCAD design tool is a complete power supply design tool program that can significantly ease the tasks of power supply design. It guides users to a solution, selects power stage components, provides detailed power efficiency, shows quick loop bode plot stability and load transient analysis, and can export a final design to LTspice for simulation. Click here to download LTpowerCAD

Design tools for the following parts are available in LTpowerCAD:
LT3980

Technical Support