The maximum display currents are set by a single external resistor. Current for each LED is controlled by a precision internal current source. Dimming and On/Off for all displays is achieved via the I2C serial interface. 256 brightness levels are available for the MAIN and SUB displays. 16 levels are available for the RGB and CAM displays. Four AUX current sources can be independently assigned via the I2C port to the CAM, SUB, MAIN or AUX DAC controlled displays.
The LTC3208 charge pump optimizes effi ciency based on the voltage across the LED current sources. The part powers up in 1x mode and will automatically switch to boost mode whenever any enabled LED current source begins to enter dropout. The fi rst dropout switches the part into 1.5x mode and a subsequent dropout switches the LTC3208 into 2x mode. The part is available in a small 5mm × 5mm 32-lead QFN package.
| Part Number | Package | Pins | Temp | Price (1-99) | Price (1k)* | RoHS Data |
| LTC3208EUH | QFN | 32 | E | $3.64 | $2.55 | View |
| LTC3208EUH#PBF | QFN | 32 | E | $3.64 | $2.55 | View |
| LTC3208EUH#TR | QFN | 32 | E | $2.65 | View | |
| LTC3208EUH#TRPBF | QFN | 32 | E | $2.65 | View | |
| Buy Now | ||||||
| Request Samples | ||||||
To simulate selected Linear Technology products, please download LTSpice / SwitcherCAD III. This powerful schematic capture and simulation tool includes macro models for 80% of Linear Technology's switching regulators, over 200 op amp models, as well as resistors, transistors and MOSFET models.
For other simulation tools, visit our Design Simulation and Device Models page.