LTM4615 - Triple Output, Low Voltage DC/DC μModule Regulator

Features

uModule Packaging, Assembly and Thermal Performance
    • Dual 4A Output Power Supply with 1.5A VLDO™
    • Short-Circuit and Overtemperature Protection
    • Power Good Indicators
    Switching Regulators Section—Current Mode Control
    • Input Voltage Range: 2.375V to 5.5V
    • 4A DC Typical, 5A Peak Output Current Each
    • 0.8V Up to 5V Output Each, Parallelable
    • ±2% Total DC Output Error
    • Output Voltage Tracking
    • Up to 95% Efficiency
    • Programmable Soft-Start
    VLDO Section
    • VLDO, 1.14V to 3.5V Input Range
    • VLDO, 0.4V to 2.6V, 1.5A Output
    • VLDO, 40dB Supply Rejection at fSW
    • ±1% Total DC Output Error
    • Small and Very Low Profile Package:
      15mm × 15mm × 2.82mm

Typical Application

LTM4615
LTM4615
Back to Top

Description

The LTM4615 is a complete 4A dual output switching mode DC/DC power supply plus an additional 1.5A VLDO (very low dropout) linear regulator. Included in the package are the switching controllers, power FETs, inductors, a 1.5A regulator and all support components. The dual 4A DC/DC converters operate over an input voltage range of 2.375V to 5.5V, and the VLDO operates from a 1.14V to 3.5V input. The LTM4615 supports output voltages ranging from 0.8V to 5V for the DC/DC converters, and 0.4V to 2.6V for the VLDO. The three regulator output voltages are set by a single resistor for each output. Only bulk input and output capacitors are needed to complete the design.

The low profile package (2.82mm) enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and a current mode architecture enables a very fast transient response to line and load changes without sacrificing stability. The device supports output voltage tracking for supply rail sequencing.

Additional features include overvoltage protection, foldback overcurrent protection, thermal shutdown and programmable soft-start. The power module is offered in a space saving and thermally enhanced 15mm × 15mm × 2.82mm LGA package. The LTM4615 is Pb-free and RoHS compliant.
Back to Top

Packaging

15mm x 15mm x 2.82mm LGA

LTM4615
Back to Top

Order Info

Package Variations and Pricing

Part Number Package Pins Temp Price (1-99) Price (1k)* RoHS Data
LTM4615EV#PBF LGA 144 E $24.57 $17.20 View
LTM4615IV#PBF LGA 144 I $27.03 $18.92 View
Buy Now
Request Samples
* The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Linear Technology sales office or authorized distributor.

Back to Top

Applications

  • Telecom and Networking Equipment
  • Industrial Power Systems
  • Low Noise Applications
  • FPGA, SERDES Power
Back to Top

Simulate

To simulate selected Linear Technology products, please download LTSpice / SwitcherCAD III. This powerful schematic capture and simulation tool includes macro models for 80% of Linear Technology's switching regulators, over 200 op amp models, as well as resistors, transistors and MOSFET models.

For other simulation tools, visit our Design Simulation and Device Models page.

Back to Top