LTC6908 - Dual Output Oscillator with Spread Spectrum Modulation
LTC6909 - 1 to 8 Output, Multiphase Silicon Oscillator with Spread Spectrum Modulation

LTM4616 - Dual 8A per Channel Low VIN DC/DC µModule

Features

uModule Packaging, Assembly and Thermal Performance
  • For samples contact your local sales office.
  • Complete Dual DC/DC Regulator System
  • Input Voltage Range: 2.7V to 5.5V
  • Dual 8A Outputs, or Single 16A Output with a 0.6V to 5V Range
  • Output Voltage Tracking and Margining
  • ±1.75% Total DC Output Error (–40°C to 125°C)
  • Current Mode Control/Fast Transient Response
  • Power-Good Tracking and Margining
  • Overcurrent/Thermal Shutdown Protection
  • Onboard Frequency Synchronization
  • Spread Spectrum Frequency Modulation
  • Multiphase Operation
  • Selectable Burst Mode® Operation
  • Output Overvoltage Protection
  • Gold-Pad Finish Allows Soldering with Pb and Pb- Free Solder Paste
  • Small Surface Mount Footprint, Low Profile (15mm × 15mm × 2.82mm) LGA Package

Typical Application

LTM4616
LTM4616
Back to Top

Description

The LTM®4616 is a complete dual 2-phase 8A per channel switch mode DC/DC power regulator system in a 15mm × 15mm surface mount LGA package. Included in the package are the switching controller, power FETs, inductor and all support components. Operating from an input voltage range of 2.7V to 5.5V, the LTM4616 supports two outputs within a voltage range of 0.6V to 5V, each set by a single external resistor. This high efficiency design delivers up to 8A continuous current (10A peak) for each output. Only bulk input and output capacitors are needed, depending on ripple requirement. The part can also be configured for a 2-phase single output at up to 16A.

The low profile package (2.82mm) enables utilization of unused space on the back side of PC boards for high density point-of-load regulation.

Fault protection features include overvoltage protection, overcurrent protection and thermal shutdown. The power module is offered in a space saving and thermally enhanced 15mm × 15mm × 2.82mm LGA package. The LTM4616 is Pb-free and RoHS compliant.
Back to Top

Packaging

15mm x 15mm x 2.8mm LGA

LTM4616
Back to Top

Order Info

Package Variations and Pricing

Part Number Package Pins Temp Price (1-99) Price (1k)* RoHS Data
LTM4616EV#PBF LGA 144 E $27.79 $19.45 View
LTM4616IV#PBF LGA 144 I $30.57 $21.40 View
Buy Now
Request Samples
* The USA list pricing shown is for BUDGETARY USE ONLY, shown in United States dollars (FOB USA per unit for the stated volume), and is subject to change. International prices may differ due to local duties, taxes, fees and exchange rates. For volume-specific price or delivery quotes, please contact your local Linear Technology sales office or authorized distributor.

Back to Top

Applications

  • Telecom, Networking and Industrial Equipment
  • Storage and ATCA, PCI Express Cards
  • Battery Operated Equipment
Back to Top

Simulate

LTSpice IV is a powerful FREE circuit simulator and schematic capture program, providing macro models for 80% of Linear Technology's switching regulators, over 200 op amp models, as well as resistors, transistors and MOSFET models.

  • Step 1. If you do not already have a copy of LTSpice IV, click here to download and install LTSpice / SwitcherCAD III

  • Step 2. Once LTSpice is installed, click here for a ready to run  demonstration circuit of the LTM4616.

  • Step 3. If LTspice IV does not automatically open after clicking the above link, you can instead run the simulation by right clicking on the link and selecting “Save Target As”. After saving the file to your computer, start LTSpice and open the demonstartion circuit by selecting "Open" from the "File" menu.
For our complete list of hundreds of ready to run demo circuits, visit our LTspice IV Demo Circuits Collection
Back to Top