| LTC4252 |
1 |
-15V to -500V |
50mV |
10 |
0.8 |
- |
Negative voltage hot swap controllers, -1 Latchoff, -2 Auto-Retry, LTC4252A for tighter UV/OV/ECB accuracy. |
MS-10,MS-8 |
| LTC4231 |
1 |
2.7V to 36V |
50mV |
6 |
0.004 |
Low Iq, Low Iq Shutdown |
Low Iq Hot Swap Controller, -1 remains off after fault, -2 automatic retry |
3x3 QFN-12,MS-12 |
| LT1640A |
1 |
-10V to -80V |
50mV |
20 |
1.3 |
- |
-48V hot swap controller, Improved drain pin ruggedness, Powergood active high (AH) or low (AL) |
N-8,SO-8 |
| LTC4253B |
1 |
-15V to -500V |
50mV |
20 |
0.8 |
- |
-48V Hot Swap Controller with Sequencer |
SSOP-16 |
| LTC4260 |
1 |
8.5V to 80V |
50mV |
10 |
2 |
8-bit ADC, Digital Interface |
Positive High Voltage Hot Swap Controller with I²C Compatible Monitoring |
5x5 QFN-32,SSOP-24,SW-24 |
| LTM9100 |
1 |
-1000V to 1000V |
50mV |
10 |
50 |
10-bit ADC, Digital Interface, Galvanic Isolation, Low Iq Shutdown |
Anyside High Voltage Isolated Switch Controller with I²C Command and Telemetry |
22mm x 9mm x 5.16mm BGA |
| LTC4364 |
1 |
4V to 80V |
50mV |
10 |
0.37 |
Surge Stopper, Ideal Diode, Low Iq Shutdown |
Ride-through protection with ideal diode, Adjustable output-clamp and circuit-breaker with timer, Shutdown mode, -1 Latchoff, -2 Auto-retry |
4x3 DFN-14,MS-16,SO-16 |
| LTC4261 |
1 |
-12V to -100V |
50mV |
10 |
2 |
10-bit ADC, Digital Interface |
Negative voltage hot swap controller with ADC and I2C, Defaults to latchoff, -2 for Auto-Retry |
4x5 QFN-24,SSOP-28 |
| LT4356MP-2 |
1 |
4V to 80V |
50mV |
15 |
1 |
Surge Stopper, Low Iq Shutdown |
Ride-through protection, Adjustable output-clamp and circuit-breaker with timer, -55C to 125C Operation, Shutdown mode (aux amp stays on), Auto-retry |
SO-16 |
| LT4363 |
1 |
4V to 80V |
50mV |
10 |
0.7 |
Surge Stopper, Low Iq Shutdown |
Ride-through protection, Adjustable output-clamp and circuit-breaker with timer, Shutdown mode, Latchoff or auto-retry |
4x3 DFN-12,MS-12,SO-16 |
| LT4256-3 |
1 |
10.8V to 80V |
55mV |
18 |
1.8 |
- |
Positive high voltage hot swap controller with open circuit detect output. Higher voltage version of LT4254 |
SSOP-16 |
| LT4256-1/-2 |
1 |
10.8V to 80V |
55mV |
18 |
1.8 |
- |
Positive high voltage hot swap. Pin-compatible with LT1641. -1 Latchoff, -2 Auto-Retry |
SO-8 |
| LT4254 |
1 |
10.8V to 36V |
50mV |
20 |
1.9 |
- |
Positive high voltage hot swap controller with open circuit detect output |
SSOP-16 |
| LT4250 |
1 |
-18V to -80V |
50mV |
20 |
1.6 |
- |
-48V hot swap controller, Powergood active high (H) or low (L) |
N-8,SO-8 |
| LT4356MP-1 |
1 |
4V to 80V |
50mV |
15 |
1 |
Surge Stopper, Low Iq Shutdown |
Ride-through protection, Adjustable output-clamp and circuit-breaker with timer, -55C to 125C Operation, Shutdown mode, Auto-retry |
MS-10,SO-16 |
| LT4356-1 |
1 |
4V to 80V |
50mV |
10 |
1 |
Surge Stopper, Low Iq Shutdown |
Ride-through protection, Adjustable output-clamp and circuit-breaker with timer, Shutdown mode, Auto-retry |
4x3 DFN-12,MS-10,SO-16 |
| LT4356-2 |
1 |
4V to 80V |
50mV |
10 |
1 |
Surge Stopper, Low Iq Shutdown |
Ride-through protection, Adjustable output-clamp and circuit-breaker with timer, Shutdown mode (aux amp stays on), Auto-retry |
4x3 DFN-12,SO-16 |
| LT4356-3 |
1 |
4V to 80V |
50mV |
10 |
1 |
Surge Stopper, Low Iq Shutdown |
Ride-through protection, Adjustable output-clamp and circuit-breaker with timer, Shutdown mode, Latchoff |
4x3 DFN-12,MS-10,SO-16 |
| LTC4226 |
2 |
4.5V to 44V |
50mV |
10 |
0.7 |
- |
Wide Operating Range Dual Hot Swap Controller |
3x3 QFN-16,MS-16 |
| LTC4380 |
1 |
4V to 72V |
50mV |
10 |
0.008 |
Surge Stopper, Low Iq, Low Iq Shutdown |
Ride-through protection with 8uA Iq, Adjustable output-clamp and circuit-breaker with timer, Shutdown mode, Latchoff or auto-retry |
3x3 DFN-10,MS-10 |
| LTC4251 |
1 |
-15V to -500V |
50mV |
20 |
0.8 |
- |
Negative voltage hot swap controllers in SOT-23, Options for UV/OV thresholds |
SOT-23 |