| LT1510 |
7 |
29 |
1 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Constant-Voltage/Constant-Current Battery Charger |
N-16,SO-16,SO-8,SSOP-16 |
| LT1511 |
7 |
29 |
3 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Constant-Current/ Constant-Voltage 3A Battery Charger with Input Current Limiting |
SW-24 |
| LTC4015 |
4.5 |
35 |
20 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
Up to 35V Battery Voltage |
Multichemistry Buck Battery Charger Controller with Digital Telemetry System |
5x7 QFN-38 |
| LTC4156 |
4.35 |
5.5 |
3.5 |
Switching |
LiFePO4 |
1 |
Dual-Input Power Manager / 3.5A LiFePO4 Battery Charger with I2C Control and USB OTG |
4x5 QFN-28 |
| LTC4079 |
2.7 |
60 |
0.25 |
Linear |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid, NiMH |
Up to 60V battery voltage |
LTC4079 - 60V, 250mA Linear Charger with Low Quiescent Current |
3x3 DFN-10 |
| LTC4081 |
3.75 |
5.5 |
0.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
500mA Li-Ion Charger with NTC Input and 300mA Synchronous Buck |
3x3 DFN-10 |
| LTC3559 |
3 |
5.5 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear USB Battery Charger with Dual Buck Regulators |
3x3 QFN-16 |
| LTC4013 |
4.5 |
60 |
20 |
Switching |
Li-Ion, Li-Polymer, Lead Acid, LiFePO4, NiMH, NiCd |
Up to 60V Battery Voltage |
60V Synchronous Buck Multi-Chemistry Battery Charger |
4x5 QFN-28 |
| LTC3557 |
2.7 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Li-Ion Charger and Three Step Down Regulators |
4x4 QFN-28 |
| LTC4090 |
6 |
38 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager + Triple Sync Buck, Bat-Track, 4.2V Vfloat |
6x3 DFN-22 |
| LTC4090-5 |
6 |
38 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager + Triple Sync Buck, 4.2V Vfloat, No Bat-Track |
6x3 DFN-22 |
| LTC4089-3 |
6 |
36 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger, 3.95V Vfloat, Bat-Track |
6x3 DFN-22 |
| LTC4089-1 |
6 |
36 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger, 4.1V Vfloat |
6x3 DFN-22 |
| LTC4089 |
6 |
36 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger, 4.2V Vfloat, Bat-Track |
6x3 DFN-22 |
| LTC3586-2 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Output Only, No Latch, 100mV Boost Overvoltage Hysteresis |
4x6 QFN-38 |
| LTC4001-1 |
4 |
5.5 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
2A Synchronous Buck Li-Ion Charger, 4.1V Float Voltage |
4x4 QFN-16 |
| LTC3586 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Bi-Directional with Latch, 300mV Boost Overvoltage Hysteresis |
4x6 QFN-38 |
| LTC3555 |
2.7 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager + Triple Step-Down DC/DC |
4x5 QFN-28 |
| LTC4067 |
4.35 |
5.5 |
1.25 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with OVP and Li-Ion/Polymer Charger |
4x3 DFN-12 |
| LTC3586-1 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Bi-Directional with Latch, 300mV Boost Overvoltage Hysteresis |
4x6 QFN-38 |
| LTC4001 |
4 |
5.5 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
2A Synchronous Buck Li-Ion Charger, 4.2V Float Voltage |
4x4 QFN-16 |
| LTC4121-4.2 |
4.4 |
40 |
0.4 |
Switching |
Li-Ion, Li-Polymer |
1 |
40V 400mA Synchronous Step-Down Battery Charger, Fixed 4.2V |
3x3 QFN-16 |
| LTC4120-4.2 |
4.25 |
40 |
0.4 |
Switching |
Li-Ion, Li-Polymer |
1 |
400mA Wireless Power Receiver Buck Battery Charger, Fixed 4.2V Float |
QFN-16 |
| LTC4040 |
3.5 |
5.5 |
2.5 |
Switching |
Li-Ion, Li-Poly, LiFePO4 |
1 |
2.5A Battery Backup Power Manager |
4x5 QFN-24 |
| LTC3586-3 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Boost, Buck-Boost and Dual Bucks, Fault Pin Output Only, No Latch, 100mV Boost Overvoltage Hysteresis |
4x6 QFN-38 |
| LTC4121 |
4.4 |
40 |
0.4 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
Up to 18V Battery Voltage |
40V 400mA Synchronous Step-Down Battery Charger, Adj Float Voltage |
3x3 QFN-16 |
| LTC4123 |
2.2 |
5 |
0.025 |
Linear |
NiMH |
1 |
Low Power Wireless Charger for Hearing Aids |
2x2 DFN-6 |
| LTC4120 |
4.25 |
40 |
0.4 |
Switching |
Li-Ion, Li-Polymer |
1, 2 |
400mA Wireless Power Receiver Buck Battery Charger, Adj. Float Voltage |
3x3 QFN-16 |
| LTC4070 |
3.1 |
|
0.05 |
Shunt |
Li-Ion, Li-Polymer |
1 |
Li-Ion/Polymer Shunt Battery Charger System |
3x2 DFN-8,MS-8 |
| LTC4071 |
2.65 |
|
0.05 |
Shunt |
Li-Ion, Li-Polymer |
1 |
Li-Ion/Polymer Shunt Battery Charger System with Low Battery Disconnect |
3x2 DFN-8,MS-8 |
| LTC1760 |
6 |
28 |
4 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH |
2 to 6 (Li) |
Dual Smart Battery System Manager |
TSSOP-48 |
| LTC4100 |
6 |
28 |
4 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH |
2 to 6 (Li) |
SMBus v. 1.1, Level 2 charger. Operates with or without host microcontroller |
SSOP-24 |
| LTC4101 |
6 |
28 |
4 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH |
1 (Li) |
Smart Battery Charger Controller |
SSOP-24 |
| LTC4061-4.4 |
4.5 |
8 |
1 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone Linear Li-Ion Battery Charger with Thermistor Input, 4.4V Vfloat |
3x3 DFN-10 |
| LTC4061 |
4.3 |
8 |
1 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone Linear Li-Ion Battery Charger with Thermistor Input, 4.2V Vfloat |
3x3 DFN-10 |
| LTC4050 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
1 |
LTC1732 + thermistor interface |
MS-10 |
| LTC4052-4.2 |
4.5 |
10 |
1.3 |
Pulse |
Li-Ion, Li-Polymer |
1 |
Lithium-Ion Battery Pulse Charger |
MS-8 |
| LTC4002-4.2 |
4.7 |
24 |
3 |
Switching |
Li-Ion, Li-Polymer |
1 |
Charges 1-cell Li-Ion battery from high Vin, 4.2V Float Voltage |
3x3 DFN-10,SO-8 |
| LTC4002-8.4 |
8.9 |
24 |
3 |
Switching |
Li-Ion, Li-Polymer |
2 |
Charges 2-cell Li-Ion battery from high Vin, 8.4V Float Voltage |
3x3 DFN-10,SO-8 |
| LTC4006 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer |
2 to 4 |
4A, High Efficiency, Standalone Li-Ion Battery Charger |
SSOP-16 |
| LTC4007-1 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer |
3, 4 |
Low Battery Thresholds 3.25V/3.173V, Restart Disabled, QFN-24 Package |
4x5 QFN-24 |
| LTC3455 |
4.3 |
5.5 |
1 |
Linear |
Li-Ion, Li-Polymer |
- |
Dual DC/DC Converter with USB Power Manager and Li-Ion Battery Charger |
4x4 QFN-24 |
| LTC4007 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer |
3, 4 |
Low Battery Thresholds 2.5V/2.44V, Restart Enabled, SSOP-24 Package |
SSOP-24 |
| LTC4053-4.2 |
4.25 |
6.5 |
1.25 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Compatible Lithium-Ion Battery Charger with Thermal Regulation |
3x3 DFN-10,MS-10E |
| LTC4063 |
4.3 |
8 |
1 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone Linear Li-Ion Charger with Micropower Low Dropout Linear Regulator |
3x3 DFN-10 |
| LTC1732-4 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
1 |
Lithium-Ion Linear Battery Charger, Vfloat 4.1V or 4.2V (pin select) |
MS-10 |
| LTC1731-8.4 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
2 |
Single Cell Lithium-Ion Linear Battery Charger , 8.4V Float |
MS-8,SO-8 |
| LTC1731-8.2 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
2 |
Single Cell Lithium-Ion Linear Battery Charger , 8.2V Float |
MS-8,SO-8 |
| LTC4055 |
4.3 |
5.5 |
1.25 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Low-Loss 200mohm Ideal Diode and Li-Ion Battery Charger |
4x4 QFN-16 |
| LTC1732-4.2 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
1 |
Lithium-Ion Linear Battery Charger, Vfloat 4.2V |
MS-10 |
| LTC1733 |
4.5 |
6.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
Monolithic Linear Lithium-Ion Battery Charger with Thermal Regulation |
MS-10E |
| LTC4065 |
3.75 |
5.5 |
0.75 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Battery Charger in 2x2 DFN, 4.2V Vfloat |
2x2 DFN-6 |
| LTC1731-4.2 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
1 |
Single Cell Lithium-Ion Linear Battery Charger , 4.2V Float |
MS-8,SO-8 |
| LTC1731-4.1 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
1 |
Single Cell Lithium-Ion Linear Battery Charger , 4.1V Float |
MS-8,SO-8 |
| LTC4056-4.2 |
4.5 |
6.5 |
0.7 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear Li-Ion Charger with Termination in ThinSOT |
SOT-23 |
| LTC1732-8.4 |
4.5 |
12 |
2 |
Linear |
Li-Ion, Li-Polymer |
2 |
Lithium-Ion Linear Battery Charger, Vfloat 8.4V |
MS-10 |
| LTC1980 |
4.1 |
12 |
2 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1, 2 |
Combination Battery Charger and DC/DC Converter |
SSOP-24 |
| LTC4064 |
4.25 |
6.5 |
1 |
Linear |
Li-Ion, Li-Polymer |
1 |
For battery backup. 4.0V float voltage |
MS-10E |
| LTC1730 |
4.5 |
12 |
1.3 |
Pulse |
Li-Ion, Li-Polymer |
1 |
Minimum heat dissipation. Selectable 4.1V/4.2V. current limit protection. for use current limited wall adapter |
SO-8,SSOP-16 |
| LTM8052A |
6 |
36 |
5 |
Switching |
- |
Up to 24V float voltage |
36Vin, 5A, 2-Quadrant CVCC Buck uModule, No Output OVP |
15mm x 11.25mm x 2.82mm LGA,15mm x 11.25mm x 3.42mm BGA |
| LTM8052 |
6 |
36 |
5 |
Switching |
- |
Up to 24V float voltage |
36Vin, 5A, 2-Quadrant CVCC Buck uModule, 125% Output OVP |
15mm x 11.25mm x 2.82mm LGA,15mm x 11.25mm x 3.42mm BGA |
| LTM8026 |
6 |
36 |
5 |
Switching |
- |
Up to 24V float voltage |
36Vin, 5A, CVCC Step-Down uModule Regulator |
15mm x 11.25mm x 2.82mm LGA,15mm x 11.25mm x 3.42mm BGA |
| LTC4009 |
6 |
28 |
8 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, LiFePO4, Lead Acid |
1 to 6 (Li), 2 to 18 (Ni) |
High Efficiency, Multi-Chemistry Battery Charger, Adj Vout |
4x4 QFN-20 |
| LTC4012-3 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
1 to 6 (Li), 4 to 18 (Ni) |
High Efficiency, Multi-Chemistry Charger with PowerPath, Adj Vfloat, No /ACP Pin |
4x4 QFN-20 |
| LTC4059A |
3.75 |
8 |
0.9 |
Linear |
Li-Ion, Li-Polymer, NiCd, NiMH |
1 |
ACPR Pin Indicates Presence of Input Supply (LTC4059A) |
2x2 DFN-6 |
| LTC4059 |
3.75 |
8 |
0.9 |
Linear |
Li-Ion, Li-Polymer, NiCd, NiMH |
1 |
Constant-Current Source Mode for Charging Nickel Batteries (LTC4059) |
2x2 DFN-6 |
| LTC4057-4.2 |
4.25 |
6.5 |
0.8 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear Li-Ion Battery Charger with Thermal Regulation in ThinSOT |
SOT-23 |
| LT1505 |
11 |
26 |
4 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Constant-Current/Voltage High Efficiency Battery Charger |
SSOP-28 |
| LTC4012-1 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Charger with PowerPath, 4.2V Vfloat |
4x4 QFN-20 |
| LTC4009-1 |
6 |
28 |
8 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Battery Charger, Pin Programmable 1-4 4.1V Li-Ion Cells |
4x4 QFN-20 |
| LTC4009-2 |
6 |
28 |
8 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Battery Charger, Pin Programmable 1-4 4.2V Li-Ion Cells |
4x4 QFN-20 |
| LTC4012 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
1 to 6 (Li), 2 to 18 (Ni) |
High Efficiency, Multi-Chemistry Charger with PowerPath, Adj Vfloat |
4x4 QFN-20 |
| LTC4008 |
6 |
28 |
4 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, LiFePO4, Lead Acid |
1 to 6 (Li), 4 to 18 (Ni) |
4A, High Efficiency, Multi-Chemistry Battery Charger |
SSOP-20 |
| LTC4012-2 |
6 |
28 |
12 |
Switching |
Li-Ion, Li-Polymer |
1 to 4 (Li) |
High Efficiency, Multi-Chemistry Charger with PowerPath, 4.1V Vfloat |
4x4 QFN-20 |
| LTC1734L-4.2 |
4.55 |
8 |
0.18 |
Linear |
Li-Ion, Li-Polymer |
1 |
Lithium-Ion Linear Battery Charger in ThinSOT, Vfloat 4.1V, Up to 180mA Icharge |
SOT-23 |
| LT1769 |
7 |
29 |
2 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
Constant-Current/Constant-Voltage 2A Battery Charger with Input Current Limiting |
SSOP-28,TSSOP-20 |
| LTC1734-4.2 |
4.55 |
8 |
0.7 |
Linear |
Li-Ion, Li-Polymer |
1 |
Lithium-Ion Linear Battery Charger in ThinSOT, Vfloat 4.2V, Up to 700mA Icharge |
SOT-23 |
| LTC1734-4.1 |
4.55 |
8 |
0.7 |
Linear |
Li-Ion, Li-Polymer |
1 |
Lithium-Ion Linear Battery Charger in ThinSOT, Vfloat 4.1V, Up to 700mA Icharge |
SOT-23 |
| LTC1960 |
6 |
28 |
4 |
Switching, SPI |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 18 (Ni), 2 to 6 (Li) |
Dual Battery Charger/ Selector with SPI Interface |
5x7 QFN-38,SSOP-36 |
| LTC1759 |
6.7 |
26 |
8 |
Switching, SMBus |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 17 (Ni) |
SMBus Charger with integrated SMBus Accelerator |
SSOP-36 |
| LT1571 |
6.2 |
27 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1, 2, Adj |
Integrated switching charger with C/10 detection/indicator |
SSOP-16,SSOP-28 |
| LT3761 |
4.5 |
60 |
20 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
Set by external charger IC |
LT3761 Offers Open LED Status Pin, LT3761-1 Offers Frequency Synchronization |
MS-16E |
| LT1512 |
2.4 |
29 |
0.75 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
SEPIC Constant-Current/Constant-Voltage Battery Charger |
N-8,SO-8,SSOP-16 |
| LT1513 |
2.4 |
29 |
2 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 12 (Ni) |
100mV Current Sense Voltage for High Efficiency (LT1513) |
DDPAK-7 |
| LT3796 |
6 |
100 |
20 |
Switching |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
Set by externals |
100V Constant-Current and Constant-Voltage Controller with Dual Current Sense |
TSSOP-28 |
| LT1513-2 |
2.4 |
29 |
2 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, NiCd, NiMH, Lead Acid |
1 to 4 (Li), 1 to 18 (Ni) |
0mV Current Sense Voltage for Easy Current Programming (LT1513-2) |
DDPAK-7,TO-220 |
| LT8490 |
6 |
80 |
10 |
Switching |
Lead Acid, Li-Ion, Li-Polymer, LiFePO4 |
1.3V to 80V Float Voltage |
High Voltage, High Current Buck-Boost Battery Charge Controller with Maximum Power Point Tracking (MPPT) |
7x11 QFN-64 |
| LTC4090-3 |
6 |
36 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager + Triple Sync Buck, Bat-Track, 3.95V Vfloat |
6x3 DFN-22 |
| LTC4000-1 |
3 |
60 |
20 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
Set by external charger IC |
High Voltage High Current Battery Charger with Maximum Power Point Control (MPPC) |
4x5 QFN-28,SSOP-28 |
| LTC4000 |
3 |
60 |
20 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, NiCd, NiMH, Lead Acid |
Set by external charger IC |
High Voltage High Current Battery Charger |
4x5 QFN-28,SSOP-28 |
| LTC4155 |
4.35 |
5.5 |
3.5 |
Switching, I2C |
Li-Ion, Li-Polymer |
1 |
Dual Input Power Manager / 3.5A Li-Ion Battery Charger with I2C Control and USB OTG |
4x5 QFN-28 |
| LTC4062 |
4.3 |
8 |
1 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone Linear Li-Ion Battery Charger with Micropower Comparator |
3x3 DFN-10 |
| LTC4097 |
4.25 |
5.5 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB/Wall Adapter Standalone Li-Ion/Polymer Battery Charger |
3x2 DFN-12 |
| LTC4096 |
4.25 |
5.5 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Standalone Li-Ion Battery Chargers |
3x3 DFN-10 |
| LTC4078 |
4.3 |
22 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Li-Ion Battery Charger with Overvoltage Protection |
3x3 DFN-10 |
| LTC4075HVX |
4.3 |
22 |
.950 |
Linear |
Li-Ion, Li-Polymer |
1 |
High Voltage Dual Input Li-Ion/Polymer Charger, 22Vin Abs Max, No Trickle Charge |
3x3 DFN-10 |
| LTC4075 |
4.3 |
8 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Dual Input USB/AC Adapter Standalone Li-Ion Battery Chargers |
3x3 DFN-10 |
| LTC4068-4.2 |
4.25 |
6.5 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Adjustable charge termination current |
3x3 DFN-8 |
| LTC4076 |
4.3 |
8 |
1 |
Linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Standalone Battery Charger |
3x3 DFN-10 |
| LTC3552-1 |
4.25 |
8 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear Li-Ion Battery Charger and Dual Synchronous Buck, 1.8V & 1.575Vout |
5x3 DFN-16 |
| LTC3550 |
4.3 |
8 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Dual Input USB/AC Adapter Li-Ion Charger with 600mA Buck, Adj Output |
5x3 DFN-16 |
| LTC3550-1 |
4.3 |
8 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Dual Input USB/AC Adapter Li-IonCharger with 600mA Buck, Fixed 1.875Vout |
5x3 DFN-16 |
| LTC3552 |
4.25 |
8 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear Li-Ion Battery Charger and Dual Synchronous Buck, Adj Vout |
5x3 DFN-16 |
| LTC4110 |
4.5 |
19 |
3 |
Switching |
Li-Ion, Li-Polymer, Lead Acid, NiMH, NiCd |
1-4 Li, up to 10 Ni, up to 6 SLA |
Battery Backup System Manager |
5x7 QFN-38 |
| LT3651-4.1 |
6.5 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
1 |
Monolithic 4A High Voltage Li-Ion Battery Charger, 4.1V Float |
5x6 QFN-36 |
| LT3650-4.2 |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Voltage 2 Amp Monolithic 1-Cell Li-Ion Battery Charger, 4.2V Float |
3x3 DFN-12,MS-12E |
| LT3650-8.4 |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
2 |
High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger, 8.4V Float |
3x3 DFN-12,MS-12E |
| LT3650-8.2 |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
2 |
High Voltage 2 Amp Monolithic 2-Cell Li-Ion Battery Charger, 8.2V Float |
3x3 DFN-12,MS-12E |
| LT3651-8.4 |
9 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
2 |
Monolithic 4A High Voltage 2-Cell Li-Ion Battery Charger, 8.4V Float |
5x6 QFN-36 |
| LTM8061 |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
1, 2 |
32V, 2A uModule Battery Charger, LTM8061-4.1/4.2/8.2/8.4 Fixed Float Voltages |
15mm × 9mm × 4.32mm LGA |
| LTM8062A |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
1-4 Li-Ion/Li-Poly, 1-5 LiFePO4, SLA up to 18.8V |
32VIN, 2A μModule Battery Charger, Float Voltage Up to 18.8V |
15mm × 9mm × 4.32mm LGA |
| LT3652HV |
4.95 |
34 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
1-4 Li-Ion/Li-Poly, 1-5 LiFePO4, SLA up to 18V |
Power Tracking 2A Battery Charger for Solar, Vin Max 34V, Vfloat Max 18V |
3x3 DFN-12,MS-12E |
| LTC4020 |
4.5 |
55 |
20 |
Switching, Buck-Boost |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
Up to 55V Battery Voltage |
55V Buck-Boost Multi-Chemistry Battery Charger |
5x7 QFN-38 |
| LT3652 |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
1-3 Li-Ion/Li-Poly, 1-4 LiFePO4, SLA up to 14.4V |
Power Tracking 2A Battery Charger for Solar, Vin Max 32V, Vfloat Max 14.4V |
3x3 DFN-12,MS-12E |
| LT3651-8.2 |
9 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
2 |
Monolithic 4A High Voltage 2-Cell Li-Ion Battery Charger, 8.2V Float |
5x6 QFN-36 |
| LTM8062 |
4.95 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer, LiFePO4, Lead Acid |
1-4 Li-Ion/Li-Poly, 1-5 LiFePO4, SLA up to 14.4V |
32VIN, 2A μModule Battery Charger, Float Voltage Up to 14.4V |
15mm × 9mm × 4.32mm LGA |
| LT3650-4.1 |
4.75 |
32 |
2 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Voltage 2 Amp Monolithic 1-Cell Li-Ion Battery Charger, 4.1V Float |
3x3 DFN-12,MS-12E |
| LTC4080 |
3.75 |
5.5 |
0.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
500mA Standalone Li-Ion Charger with 300mA Buck in DFN |
3x3 DFN-10,MS-10E |
| LTC4080X |
3.75 |
5.5 |
0.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
500mA Standalone Li-Ion Charger with 300mA Buck in DFN, No Trickle Charge |
3x3 DFN-10,MS-10E |
| LT3651-4.2 |
6.5 |
32 |
4 |
Switching |
Li-Ion, Li-Polymer |
1 |
Monolithic 4A High Voltage Li-Ion Battery Charger, 4.2V Float |
5x6 QFN-36 |
| LTC4065-4.4 |
3.75 |
5.5 |
0.75 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Battery Charger in 2x2 DFN, 4.4V Vfloat |
2x2 DFN-6 |
| LTC4069-4.4 |
3.75 |
5.5 |
0.75 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Charger in 2x2 DFN with NTC Thermistor Input, 4.4V Vfloat |
2x2 DFN-6 |
| LTC4065L |
3.75 |
5.5 |
0.25 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone 250mA Li-Ion Battery Charger in 2×2 DFN, 250mA Icharge, 4.2V Vfloat |
2x2 DFN-6 |
| LTC4054-4.2 |
4.25 |
6.5 |
0.8 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear Li-Ion Charger with Thermal Regulation in ThinSOT, 4.2V Vfloat |
SOT-23 |
| LTC4054L-4.2 |
4.25 |
6.5 |
0.15 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear Li-Ion Charger with Thermal Regulation in ThinSOT, 150mA Icharge, 4.2V Vfloat |
SOT-23 |
| LTC4085-1 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode, 4.1V Li-Ion Charger, 32.6% Vvntc, Undervoltage Current Limit |
4x3 DFN-14 |
| LTC4085-3 |
4.35 |
5.5 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode, 3.95V Li-Ion Charger, 32.6% Vvntc, No Undervoltage Current Limit |
4x3 DFN-14 |
| LTC4095 |
4.3 |
5.5 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone USB Li-Ion/Polymer Battery Charger in 2mm x 2mm DFN |
2x2 DFN-8 |
| LTC4085-4 |
4.35 |
5.5 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode, 3.95V Li-Ion Charger, 32.6% Vvntc, No Undervoltage Current Limit |
4x3 DFN-14 |
| LTC4054X-4.2 |
4.25 |
6.5 |
0.8 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear Li-Ion Charger with Thermal Regulation in ThinSOT, No Trickle Charge, 4.2V Vfloat |
SOT-23 |
| LTC4077 |
4.3 |
8 |
1 |
Linear |
Li-Ion, Li-Polymer |
1 |
Dual Input Standalone Li-Ion Battery Charger |
3x3 DFN-10 |
| LTC4058X-4.2 |
4.25 |
6.5 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone Linear Li-Ion Chargers with Thermal Regulation in DFN, No Trickle Charge |
3x3 DFN-8 |
| LTC4058-4.2 |
4.25 |
6.5 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone Linear Li-Ion Chargers with Thermal Regulation in DFN |
3x3 DFN-8 |
| LTC4069 |
3.75 |
5.5 |
0.75 |
Linear |
Li-Ion, Li-Polymer |
1 |
Standalone 750mA Li-Ion Charger in 2×2 DFN with NTC Thermistor Input, 4.2V Vfloat |
2x2 DFN-6 |
| LTC4060 |
4.5 |
10 |
2 |
Linear |
NiCd, NiMH, Lead Acid |
1 to 4 |
Standalone Linear NiMH/NiCd Fast Battery Charger |
5x3 DFN-16,TSSOP-16 |
| LTC4010 |
5.5 |
34 |
4 |
Switching |
NiCd, NiMH |
1 to 16 |
Nickel Battery Charger Controller |
TSSOP-16 |
| LTC4011 |
4.5 |
34 |
4 |
Switching |
NiCd, NiMH |
1 to 16 |
Nickel Battery Charger Controller with PowerPath Control |
TSSOP-20 |
| LTM8055 |
5 |
36 |
8.5 |
Switching |
- |
Up to 36V float voltage |
36VIN, 8.5A Buck-Boost μModule Regulator |
15mm x 15mm x 4.92mm BGA |
| LTM8054 |
5 |
36 |
5.4 |
Switching |
- |
Up to 36V float voltage |
36VIN, 5.4A Buck-Boost μModule Regulator |
15mm x 11.25mm x 3.42mm BGA |
| LTC3106 |
0.85 |
5.1 |
0.3 |
|
Li-Ion, Li-Poly, NiMH |
1 |
300mA Low Voltage Buck-Boost Converter with PowerPath and 1.6µA Quiescent Current |
3x4 QFN-20,TSSOP-20 |
| LTM8064 |
6 |
58 |
6 |
Switching |
- |
Up to 36V float voltage |
58VIN, 6A CVCC Step-Down μModule Regulator |
16mm x 11.9mm x 4.92mm BGA |
| LTC4150 |
2.7 |
8.5 |
|
Gas Gauge |
Li-Ion, Li-Polymer, Lead Acid, NiMH, NiCd |
1 |
Coulomb Counter/Battery Gas Gauge |
MS-10 |
| LTC4125 |
3 |
5.5 |
|
- |
- |
- |
5W AutoResonant Wireless Power Transmitter |
4x5 QFN-20 |
| LTC3300-2 |
|
36 |
10 |
Battery Balancer |
Li-Ion, LiFePO4 |
2 to 6 Li-Ion/LiFePO4 |
Addressable High Efficiency Bidirectional Multicell Battery Balancer |
7x7 LQFP-48,7x7 QFN-48 |
| LTM8056 |
5 |
58 |
5.4 |
Switching |
- |
Up to 48V float voltage |
58Vin, 48Vout Buck-Boost μModule Regulator |
15mm x 15mm x 4.92mm BGA |
| LT8584 |
2.5 |
7.5 |
2.5 |
Battery Balancer |
Li-Ion, LiFePO4 |
1 Li-Ion/LiFePO4 |
2.5A Monolithic Active Cell Balancer with Telemetry Interface |
TSSOP-16 |
| LTC2944 |
3.6 |
60 |
- |
Coulomb Counter |
Li-Ion, Li-Polymer, LiFeO2, NiCd, NiMH, Lead Acid |
Up to 60V Battery Voltage |
60V Battery Gas Gauge with Temperature, Voltage and Current Measurement |
3x3 DFN-8 |
| LTC4160 |
4.35 |
5.5 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
Switching Power Manager with USB OTG And OVP, 4.2V Vfloat |
3x4 QFN-20 |
| LTC3567 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager Plus 1A Buck-Boost Converter with I2C Control |
4x4 QFN-24 |
| LTC3677-3 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated Portable Product PMIC |
4x7 QFN-44 |
| LTC3576 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
Switching Power Manager with USB On-The-Go + Triple Step-Down DC/DC |
4x6 QFN-38 |
| LTC6811-1 |
|
75 |
|
|
Multi-Chemistry: Cell Voltage Range: 0V to 5V |
|
Multicell Battery Monitors |
SSOP-48 |
| LTC6804-2 |
|
75 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell Voltage Range: -0.3V to 5V |
> 1000V of stacked Li-Ion cells |
Advanced 3rd generation device. Total Measurement Error < 1.2mV. Total Measurement Time =290μs |
SSOP-48 |
| LTC6804-1 |
|
75 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell Voltage Range: -0.3V to 5V |
> 1000V of stacked Li-Ion cells |
Advanced 3rd generation device. Total Measurement Error < 1.2mV. Total Measurement Time =290μs |
SSOP-48 |
| LTC6811-2 |
|
75 |
|
|
Multi-Chemistry: Cell Voltage Range: 0V to 5V |
|
Multicell Battery Monitors |
SSOP-48 |
| LTC3577 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated 6-Channel Portable PMIC, Bat-Track, 4.2V Float |
4x7 QFN-44 |
| LTC3577-3 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated Portable Product PMIC, No Bat-Track, 4.2V Float |
4x7 QFN-44 |
| LTC3577-1 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated 6-Channel Portable PMIC, Bat-Track, 4.1V Float |
4x7 QFN-44 |
| LTC6803-4 |
|
75 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell Voltage Range: -0.3V to 5V |
> 1000V of stacked Li-Ion cells |
Not pin compatible to LTC6802. Improved performance over LTC6803-2 |
SSOP-44 |
| LTC6803-3 |
|
75 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell Voltage Range: -0.3V to 5V |
> 1000V of stacked Li-Ion cells |
Not pin compatible to LTC6802. Improved performance over LTC6803-1 |
SSOP-44 |
| LTC6802-1 |
|
60 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell voltages from 0V to 5V |
> 1000V of stacked Li-Ion cells |
LTC6803-1 (Drop-in upgrade) or LTC6803-3 recommended for new designs |
SSOP-44 |
| LTC6801 |
|
60 |
|
Battery Stack Monitor |
Multi-Chemistry: OV Range: 3.733V to 4.498V, UV Range: 0.766V to 2.871V |
> 1000V of stacked Li-Ion cells |
Independent Multicell Battery Stack Fault Monitor |
SSOP-36 |
| LTC6802-2 |
|
60 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell voltages from 0V to 5V |
> 1000V of stacked Li-Ion cells |
LTC6803-2 (Drop-in upgrade) or LTC6803-4 recommended for new designs |
SSOP-44 |
| LTC6803-1 |
|
75 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell Voltage Range: -0.3V to 5V |
> 1000V of stacked Li-Ion cells |
Pin compatible , drop-in upgrade to LTC6802-1 |
SSOP-44 |
| LTC6803-2 |
|
75 |
|
Battery Stack Monitor |
Multi-Chemistry: Cell Voltage Range: -0.3V to 5V |
> 1000V of stacked Li-Ion cells |
Pin compatible , drop-in upgrade to LTC6802-2 |
SSOP-44 |
| LTC4160-1 |
4.35 |
5.5 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
Switching Power Manager with USB OTG And OVP, 4.1V Vfloat |
3x4 QFN-20 |
| LTC3554-3 |
2.7 |
5.5 |
0.4 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager With Li-Ion Charger, Dual Buck, Vfloat 4.2V, 14s Reset, No Sequencing |
3x3 QFN-20 |
| LTC2941 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer, LiFeO2, NiCd, NiMH, Lead Acid |
1 |
Battery Gas Gauge with I2C Interface |
2x3 DFN-6,MS-8E |
| LTC2941-1 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer, LiFeO2, NiCd, NiMH, Lead Acid |
1 |
1A I2C Battery Gas Gauge with Internal Sense Resistor |
2x3 DFN-6 |
| LTC3456 |
1.8 |
5.5 |
|
- |
Alkaline, NiCd, NiMH |
- |
2-Cell, Multi-Output DC/DC Converter with USB Power Manager |
4x4 QFN-24 |
| LTC4066 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Low-Loss 50mohm Ideal Diode and Li-Ion Battery Charger |
4x4 QFN-24,4x4 UTQFN-24 |
| LTC3553-2 |
4.35 |
5.5 |
0.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager With Li-Ion Charger, Always-On LDO and Buck, Power Good |
3x3 QFN-20 |
| LTC3553 |
4.35 |
5.5 |
0.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager With Li-Ion Charger, On/Off LDO & Buck |
3x3 QFN-20 |
| LTC2942 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer, LiFeO2, NiCd, NiMH, Lead Acid |
1 |
Battery Gas Gauge with Temperature, Voltage Measurement |
2x3 DFN-6 |
| LTC2942-1 |
2.7 |
5.5 |
|
Coulomb Counter |
Li-Ion, Li-Polymer, LiFeO2, NiCd, NiMH, Lead Acid |
1 |
1A Battery Gas Gauge with Internal Rsense and Temp/Voltage Measurement |
2x3 DFN-6 |
| LTC3300-1 |
|
36 |
10 |
Battery Balancer |
Li-Ion, LiFePO4 |
2 to 6 Li-Ion/LiFePO4 |
High Efficiency Bidirectional Multicell Battery Balancer |
7x7 LQFP-48,7x7 QFN-48 |
| LTC3305 |
12 |
64 |
10 |
Battery Balancer |
Lead Acid |
Four 12V Lead Acid |
Lead Acid Battery Balancer |
TSSOP-38 |
| LTC3101 |
1.8 |
5.5 |
|
- |
Alkaline |
- |
Wide Vin, Multi-Output DC/DC Converter and PowerPath Controller |
4x4 QFN-24 |
| LTC2943-1 |
3.6 |
20 |
|
Coulomb Counter |
Li-Ion, Li-Polymer, LiFeO2, NiCd, NiMH, Lead Acid |
1-4 |
1A Multicell Battery Gas Gauge with Temperature, Voltage and Current Measurement |
3x3 DFN-8 |
| LTC2943 |
3.6 |
20 |
|
Coulomb Counter |
Li-Ion, Li-Polymer, LiFeO2, NiCd, NiMH, Lead Acid |
1-4 |
Multicell Battery Gas Gauge with Temperature, Voltage and Current Measurement |
3x3 DFN-8 |
| LTC3577-4 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
Highly Integrated Portable Product PMIC, No Bat-Track, 4.1V Float |
4x7 QFN-44 |
| LTC3554 |
2.7 |
5.5 |
0.4 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager With Li-Ion Charger, Dual Buck, Vfloat 4.2V, 5s Reset |
3x3 QFN-20 |
| LTC3558 |
4.3 |
5.5 |
0.95 |
Linear |
Li-Ion, Li-Polymer |
1 |
Linear USB Battery Charger with Buck and Buck-Boost Regulators |
3x3 QFN-20 |
| LTC3556 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager with Dual Buck and Buck-Boost DC/DCs |
4x5 QFN-28 |
| LTC3566 |
4.35 |
5.5 |
1.5 |
Linear |
Li-Ion, Li-Polymer |
1 |
High Efficiency USB Power Manager Plus 1A Buck-Boost Converter |
4x4 QFN-24 |
| LTC4098 |
4.35 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
USB Compatible Switching Power Manager/Li-Ion Charger with OVP, 4.2V Vfloat |
3x4 QFN-20 |
| LTC4098-3.6 |
4.35 |
5.5 |
1.5 |
Switching |
LiFePO4 |
1 |
USB Compatible Switching Power Manager/Li-Ion Charger with OVP, 3.6V Vfloat |
3x4 QFN-20 |
| LTC4098-1 |
4.35 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
USB Compatible Switching Power Manager/Li-Ion Charger with OVP, 4.1V Vfloat |
3x4 QFN-20 |
| LTC4089-5 |
6 |
36 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with High Voltage Switching Charger, 4.2V Vfloat |
6x3 DFN-22 |
| LTC3335 |
1.8 |
5.5 |
0.05 |
|
- |
|
Nanopower Buck-Boost DC/DC with Integrated Coulomb Counter |
3x4 QFN-20 |
| LTC3554-2 |
2.7 |
5.5 |
0.4 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager With Li-Ion Charger, Dual Buck, Vfloat 4.2V, 14s Reset |
3x3 QFN-20 |
| LTC3554-1 |
2.7 |
5.5 |
0.4 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager With Li-Ion Charger, Dual Buck, Vfloat 4.1V, 5s Reset |
3x3 QFN-20 |
| LTC4085 |
4.35 |
5.5 |
1.2 |
Linear |
Li-Ion, Li-Polymer |
1 |
USB Power Manager with Ideal Diode, Li-Ion Charger with 4.2V Float Voltage, 29% Vvntc, Undervoltage Current Limit |
4x3 DFN-14 |
| LTC4088 |
4.25 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Efficiency Battery Charger/USB Power Manager |
4x3 DFN-14 |
| LTC4088-1 |
4.25 |
5.5 |
1.5 |
Switching |
Li-Ion, Li-Polymer |
1 |
High Efficiency Battery Charger/USB Power Manager with Regulated Output Voltage |
4x3 DFN-14 |
| LTC4099 |
4.35 |
5.5 |
1.5 |
Switching, I2C |
Li-Ion, Li-Polymer |
1 |
I2C Controlled USB Power Manager/Charger with Overvoltage Protection |
3x4 QFN-20 |